First start

First start guide

Follow these steps to get started with TeltoCharge in a correct way:


Step Number	Description	Suggestions	Links
1	Connect wires	Different wire connections can be found in installation manual.	Electrical wiring diagrams
2	Pair	Pairing code is the last six digits of your installer code which can be found on sticker. Note: you have to pair to your device in first 5 minutes after turning power on. After 5 minutes, to pair - you will need to reboot the charger.	Full process is here
3	Finish set-up	Choose: currency for electricity price, authorization, add NFC tags if necessary.
4	Update device to the latest FW	After pairing, choose your device in menu and baloon might suggest you to update firmware version, please be patient.	How to update
5	Go to installer menu	Go to settings, choose installer menu. To access it, please use your full 9 digits installer code.	Full process is here
6	Configure your TeltoCharge	To achieve maximum charger power, choose all electrical and functional configurations and press Save in the end. You can use suggested configurations below:	Functionality descriptions
Additional	Suggested configurations	Here you can see suggested configurations by your product power to achieve maximum TeltoCharge power.	7.4 kW 11 kW 22 kW