Changes

[[File:TeltoCharge Installation InstallationProcess DrillingC.png|border|frameless]]'''C''' -  Insert the wall plugs into the fixing holes.

[[File:TeltoCharge Installation InstallationProcess DrillingC.png|border|frameless]]'''C''' -  Insert the wall plugs into the fixing holes.

[[File:TeltoCharge Installation InstallationProcess HousingInstallation.png|border|frameless]]

[[File:TeltoCharge Installation InstallationProcess HousingInstallation.png|border|frameless|214x214px]]

1. Fix the device on the wall by inserting the self-tapping screws (start with the top screw and make sure the housing is horizontal).

1. Fix the device on the wall by inserting the self-tapping screws (start with the top screw and make sure the housing is horizontal).

[[File:TeltoCharge_Installation_InstallationProcess_ElectricalWiring.png|border|frameless|518x518px]]

[[File:TeltoCharge_Installation_InstallationProcess_ElectricalWiring.png|border|frameless|518x518px]]

'''A''' - T/N single phase set up (can be used in 220 - 240 VAC grid);

'''A''' - T/N single phase set up (can be used in 230 +/- 10 % VAC grid);

'''B''' - T/N Three phase set up (Maximum voltage between phases (L-L) 415 V);

'''B''' - T/N Three phase set up (Maximum voltage between phases (L-L) 415 V);