First start
From Wiki
Main Page > TeltoCharge > Getting Started > First start
First start guide
-
Follow these steps to get started with TeltoCharge in a correct way:
| Step Number | Description | Suggestions | Links |
|---|---|---|---|
| 1 | Connect wires | Different wire connections can be found in installation manual. | Installation manual |
| 2 | Pair | Pairing code is the last six digits of your installer code which can be found on sticker. Note: you have to pair to your device in first 5 minutes after turning power on. After 5 minutes, to pair - you will need to reboot the charger. | Full process is here |
| 3 | Finish set-up | Choose: currency for electricity price, authorization, add NFC tags if necessary. | |
| 4 | Update device to the latest FW | After pairing, choose your device in menu and baloon might suggest you to update firmware version, please be patient. | How to update |
| 5 | Go to installer menu | Go to settings, choose installer menu. To access it, please use your full 9 digits installer code. | Full process is here |
| 6 | Configure your TeltoCharge | To achieve maximum charger power, choose all electrical and functional configurations and press Save in the end. You can use suggested configurations below: | Functionality descriptions |
| Additional | Suggested configurations | Here you can see suggested configurations by your product power to achieve maximum TeltoCharge power |
