350
edits
Changes
Installation process (NA) (view source)
Revision as of 08:32, 17 August 2022
, 08:32, 17 August 2022no edit summary
==General specifications ==
==General specifications ==
<P align="center"> '''Teltocharge tethered with Type 1 cable'''
[[File:TetheredVersion facade view.png|center|frameless|356x356px|Picture of Tethered version charger]]
[[File:TetheredVersion facade view.png|center|frameless|356x356px|Picture of Tethered version charger]]
{| class="wikitable"
{| class="wikitable" style="margin: 0px auto;" align="center" table > </table>
|'''Dimensions without cable'''
|'''Dimensions without cable'''
|170x341x97 mm
|170x341x97 mm
|-
|-
|'''Operating temperature'''
|'''Operating temperature'''
|<nowiki>-30°C - +50°C</nowiki>
|<nowiki> -30°C - +50°C</nowiki>
|-
|-
|'''IP rating'''
|'''IP rating'''
|IP55
| IP55
|-
|-
|'''IK rating'''
|'''IK rating'''
|}
|}
==Electrical specifications==
Here you can find information about electric parameters of Teltocharge product
==Site preparation requirements==
{| class="wikitable" style="margin: 0px auto;" align="center" table > </table>
! colspan="4" |AC INPUT SPECIFICATIONS
|-
|Maximum power
|7,6 kW
|9,6 kW
|11,5 kW
|-
|Input AC power connection
| colspan="3" |2 phases
|-
|Maximum current
|32 A
|40 A
|48 A
|-
|Input voltage
| colspan="3" |2 phases: (L-L) 240 ± 10% VAC
|-
|Rated frequency
| colspan="3" |50 / 60 HZ
|-
| Standby power consumption
| colspan="3" |4 W
|-
| Earth (ground) fault protection
| colspan="3" |20 mA AC, 6 mA DC
|-
|Overvoltage category
| colspan="3" |OVC II
|-
|Protection against electric shock
| colspan="3" |Class I
|-
! colspan="4" |AC Output specifications
|-
|AC output voltage range
| colspan="3" |1 phase: (L-N) 240 ± 10% VAC
|-
|Connection Standart
| colspan="3" |Type 1 cable
|-
|Connection to the grid
| colspan="2" |NEMA 6-50 plug to the wall socket
|Direct cable from house grid
(Hardwired)
|-
! colspan="4" |'''Power Cable'''
|-
|Maximum cable diameter
|17.5 mm
|
| 20,75 mm
|-
|Maximum wire cross section
| 7.5 mm<sup>2</sup>
|
|
|}
==Site preparation requirements ==
*Find a suitable site on a wall (The mounting surface required to be flat and stable, for example a finished, brick or concrete wall. Wall required to be suitable to withstand TeltoCharge weight with charging cable).
*Find a suitable site on a wall (The mounting surface required to be flat and stable, for example a finished, brick or concrete wall. Wall required to be suitable to withstand TeltoCharge weight with charging cable).
*Make sure that the required power supply is easily accessible. (Required power supply depends on the type of charger).
* Make sure that the required power supply is easily accessible. (Required power supply depends on the type of charger).
*Recommendation is not to install TeltoCharge on direct sunlight to avoid overheating.
*Recommendation is not to install TeltoCharge on direct sunlight to avoid overheating.
==Installation process==
==Installation process==
