Changes

     <p>The dongle is connected to the P1 port of the smart meter via a provided P1 cable. This connection allows the dongle to read energy consumption data directly from the smart meter:</p>

     <p>The dongle is connected to the P1 port of the smart meter via a provided P1 cable. This connection allows the dongle to read energy consumption data directly from the smart meter:</p>

     === RS-485 Connection: ===

     === RS-485 Connection ===

<p>The dongle features RS-485 terminals which are critical for establishing communication with the TeltoCharge system. These terminals are usually labeled as Ground (GND), A+ (positive differential signal), and B- (negative differential signal).

<p>The dongle features RS-485 terminals which are critical for establishing communication with the TeltoCharge system. These terminals are usually labeled as Ground (GND), A+ (positive differential signal), and B- (negative differential signal).

<p>To connect the dongle to the TeltoCharge system, you'll need to use an appropriate RS-485 cable:

<p>To connect the dongle to the TeltoCharge system, you'll need to use an appropriate RS-485 cable: