Changes

no edit summary
Line 35: Line 35:     
For the slave charger, this parameter is not as critical. It is advisable to set it to a maximum of 16 A (for 11 kW chargers) or 32 A (for 7.4/22 kW chargers).
 
For the slave charger, this parameter is not as critical. It is advisable to set it to a maximum of 16 A (for 11 kW chargers) or 32 A (for 7.4/22 kW chargers).
 +
 +
=== General CT settings ===
 +
1- We have to choose Current update interval – how often current measurement have to be updated. By default it is 3 s.
 +
 +
2- We can calibrate our DLB CT clamp to set starting point.
 +
 +
Note: before calibration, CT have to be connected to the port, but not clamped around the cable.

Navigation menu