Changes

Category:Physical installation process (view source)

Revision as of 23:50, 30 March 2023

987 bytes added ,  23:50, 30 March 2023
Created page with "==Installation process== ===Housing Installation=== border|frameless'''A''' - Place the drilling template..."
==Installation process==
===Housing Installation===
[[File:TeltoCharge Installation InstallationProcess DrillingA.png|border|frameless]]'''A''' - Place the drilling template on the wall and mark the three fixing points.

[[File:TeltoCharge Installation InstallationProcess DrillingB.png|border|frameless]]'''B''' - Drill holes where the fixing points are marked.

[[File:TeltoCharge Installation InstallationProcess DrillingC.png|border|frameless]]'''C''' - Insert the wall plugs into the fixing holes.

[[File:TeltoCharge Installation InstallationProcess HousingInstallation.png|border|frameless|214x214px]]

1. Fix the device on the wall by inserting the self-tapping screws (start with the top screw and make sure the housing is horizontal).

2. Make sure the cable gland is properly mounted on the cables (AC input cable and Ethernet cable).

← [https://wiki.teltonika-energy.com/index.php?title=Physical_installation&action=edit&redlink=1 BACK TO PHYSICAL INSTALLATION PAGE]
Retrieved from "https://wiki.teltonika-energy.com/view/Special:MobileDiff/3715"

Navigation menu