Changes

50 bytes removed ,  10:39, 4 July 2023
m
no edit summary
Line 33: Line 33:  
#'''Measuring device''': The meter should be selected. For UK chargers, it is possible to choose CT clamps.
 
#'''Measuring device''': The meter should be selected. For UK chargers, it is possible to choose CT clamps.
 
#'''Energy meter address''': This information can be found in the meter settings accessed through the meter display. If the address cannot be located, it is recommended to consult the smart meter manual.
 
#'''Energy meter address''': This information can be found in the meter settings accessed through the meter display. If the address cannot be located, it is recommended to consult the smart meter manual.
#'''Current update interval''': By default, it is set to 3 seconds. However, there may be cases where the user needs to increase this value. For instance, if there are significant distances between the chargers and the smart meter or if there are numerous interconnected chargers.<br>
+
#'''Current update interval''': By default, it is set to 3 seconds. However, there may be cases where the user needs to increase this value. For instance, if there are significant distances between the charger and the smart meter.<br>
 
<br>
 
<br>
 
<br>
 
<br>