Dynamic Load Balancing

DYNAMIC LOAD BALANCING

TeltoCharge have the ability to communicate with dedicated smart energy meter and regarding to its readings, adjust used electrical power. Such functionality allows to protect house electrical grid from overload in peak hours and optimize energy usage to meet user habits. Smart energy meter should always be installed in source electrical cabinet as showed below.  

Smart meter and TeltoCharge communication

Smart meter and TeltoCharge communicates via Modbus RS-485 protocol. In order to achieve smooth communication, it is recommended to use communication cable according to this protocol. Check example below

Note: Communication cable should be integrated with power cable.

Supported energy meters

In order to strive for wider applicability and compatibility, we constantly test and add new supported devices into list. All of the supported Energy meters and schematics how to connect them are provided below.  

TeltoCharge supported smart energy meters

Energy meter manufacturer	Technical information	Configuration in mobile application
Carlo Gavazzi series 1-3	EM and ET models	Carlo Gavazzi settings
Siemens PACxxxx	PAC models	Siemens settings
ABB A4x ; B2x	A and B models	ABB settings
Eastron SDMxx	SMD models	Eastron settings
Inepro PRO380	PRO model	Inepro settings
More coming soon...