11 kW TeltoCharge Suggested configuration

Introduction

    Here you can find information about Suggested configuration of 11 kW power TeltoCharge installer menu parameters according to your electrical grid.

    1 phase (1L+N+PE) | voltage between L-N 230V ± 10%


      To run your 11 kW TeltoCharge on 1 phase, please follow this link to suggested parameters: 7.4 kW TeltoCharge Suggested configuration. With 1-phase of 11 kW TeltoCharge you can achieve to charge at maximum 7.4 kW power.

      3 phase (3L+N+PE) | voltage between L-N 230V ± 10% | L-L 400V ± 10%