From Teltonika Energy Wiki
Main Page > TeltoCharge > General information > Electrical Specifications EVC2EVC2 Electrical Specifications
This section provides detailed information on the electrical specifications and compliance standards for the EVC2 charger.
| Electrical Specifications
|
Details
|
| Voltage |
| Single phase: | 230V (+10%) | | Three phase: | 400V (+10%) |
|
| Charging Power |
| Single phase: | Up to 7.4 kW | | Three phase: | Up to 22 kW |
|
| Frequency |
50/60 Hz
|
| PEN Protection |
Not applicable
|
| Network Type |
T/N; TT
|
| Charging Mode |
Mode 3 (according to IEC/EN 61851-1)
|
| Internal RCD-DC |
6 mA DC (according to IEC/EN 62955)
|
| Overvoltage Category |
Category III (according to IEC/EN 60664-1)
|
