Smart energy meters wiring schemes

First step

In order to make Dynamic load balancing and Solar functionality work, please always check if the wiring with your Smart energy meter is right.
List of supported Smart energy meters to work with TeltoCharge and related technical data can be found here: Smart energy meters.


Second step

Please check our suggested RS-485 communication cable wiring scheme according to your chosen Smart energy meter brand here:
• Carlo Gavazzi 1-3 series

Energy meter manufacturer	Wiring scheme
Carlo Gavazzi series 1-3	METER -> TELTOCHARGE
Siemens PACxxxx	METER -> TELTOCHARGE
ABB A4x ; B2x	METER -> TELTOCHARGE
Eastron SDMxx	METER -> TELTOCHARGE
Inepro PRO380	METER -> TELTOCHARGE

Third step

After successfull connection of your Smart energy meter, make sure to configure right parameters in your mobile application Installer's menu. Check all the parameters of your meter here below:

Energy meter manufacturer	Configuration in mobile application
Carlo Gavazzi series 1-3	Carlo Gavazzi settings
Siemens PACxxxx	Siemens settings
ABB A4x ; B2x	ABB settings
Eastron SDMxx	Eastron settings
Inepro PRO380	Inepro settings