Dynamic Load Balancing
DYNAMIC LOAD BALANCING
TeltoCharge have the ability to communicate with dedicated smart energy meter and regarding to its readings, adjust used electrical power. Such functionality allows to protect house electrical grid from overload in peak hours and optimize energy usage to meet user habits. Smart energy meter should always be installed in source electrical cabinet as showed below.
Smart meter and TeltoCharge communication
Smart meter and TeltoCharge communicates via Modbus RS-485 protocol. In order to achieve smooth communication, it is recommended to use communication cable according to this protocol. Check example below
Note: Communication cable should be integrated with power cable.
Supported energy meters
In order to strive for wider applicability and compatibility, we constantly test and add new supported devices into list. All of the supported Energy meters and schematics how to connect them are provided below.
TeltoCharge supported smart energy meters
| Energy meter manufacturer | Technical information | Configuration in mobile application | |
|---|---|---|---|
| Carlo Gavazzi series 1-3 |
EM and ET models |
Carlo Gavazzi settings | |
| Siemens PACxxxx |
PAC models |
Siemens settings | |
| ABB A4x ; B2x |
A and B models |
ABB settings | |
| Eastron SDMxx |
SMD models |
Eastron settings | |
| Inepro PRO380 |
PRO model | Inepro settings | |
| More coming soon... | |||
Carlo Gavazzi meters wiring:
Note: All of the Color-coding is strictly exemplary and is used simply to differentiate between different connection points. Different communication cables can have differently coloured wires. Connect them according to used inventory.
1st series to TeltoCharge connection
3rd and 5th series to TeltoCharge connection
Powering the energy meter
To correctly connect smart energy meter to power source, it is recommended to use manufacturers installation manuals.
