Changes

no edit summary
Line 39: Line 39:  
=== General CT settings ===
 
=== General CT settings ===
 
1- By default, it is set to 3 seconds. However, there may be cases where the user needs to increase this value. For instance, if there are significant distances between the chargers and the ct clamps or if there are numerous interconnected chargers.
 
1- By default, it is set to 3 seconds. However, there may be cases where the user needs to increase this value. For instance, if there are significant distances between the chargers and the ct clamps or if there are numerous interconnected chargers.
[[File:Ct.app.png|right|frameless|257x257px]]
  −
   
# '''Measuring device''': The meter should be selected. For UK chargers, it is possible to choose CT clamps
 
# '''Measuring device''': The meter should be selected. For UK chargers, it is possible to choose CT clamps
 
# '''Energy meter address''': This information can be found in the meter settings accessed through the meter display. If the address cannot be located, it is recommended to consult the smart meter manual.
 
# '''Energy meter address''': This information can be found in the meter settings accessed through the meter display. If the address cannot be located, it is recommended to consult the smart meter manual.
Line 47: Line 45:     
=== How to calibrate CT: ===
 
=== How to calibrate CT: ===
 +
      Line 52: Line 51:     
2- Check DLB CT and press Calibrate.  
 
2- Check DLB CT and press Calibrate.  
 
+
[[File:Calibrate-ct.jpg|right|frameless|304x304px]]
 
3 - Success.
 
3 - Success.
  −
[[File:Dlbct.jpg|right|frameless|292x292px]]