Dynamic Load Balancing2 meters
Smart meter and TeltoCharge communication
Smart meter and TeltoCharge communicates via Modbus RS-485 protocol. In order to achieve smooth communication, it is recommended to use communication cable according to this protocol. Check example below
Note: Communication cable should be integrated with power cable.
Supported energy meters
In order to strive for wider applicability and compatibility, we constantly test and add new supported devices into list. All of the supported Energy meters and schematics how to connect them are provided below.
TeltoCharge supported smart energy meters
| Energy meter manufacturer | Technical information | Configuration in mobile application | Wiring scheme |
|---|---|---|---|
| Carlo Gavazzi series 1-3 |
EM and ET models |
Carlo Gavazzi settings | METER -> TELTOCHARGE |
| Siemens PACxxxx |
PAC models |
Siemens settings | METER -> TELTOCHARGE |
| ABB A4x ; B2x |
A and B models |
ABB settings | METER -> TELTOCHARGE |
| Eastron SDMxx |
SDM models |
Eastron settings | METER -> TELTOCHARGE |
| Inepro PRO380 |
PRO model | Inepro settings | METER -> TELTOCHARGE |
| Chint |
Chint models | Chint settings | METER -> TELTOCHARGE |
| Entes |
ES models | Entes settings | METER -> TELTOCHARGE |
| Acrel |
Acrel models | Acrel settings | METER -> TELTOCHARGE |
| More coming soon... | |||