Physical Device Installation Guide

PEN CT WIRING

Product has integrated PEN fault protection.

In order to receive this functionality it is required to pass the PE cable through the internal current transformer. CT shall be wired in terminal marked "PEN".

Device Commissioning Guide

First Start Guide

Follow these steps to get started with TeltoCharge in a correct way:

Step Number	Description	Suggestions	Links
1	Connect wires	Wire connections can be found in installation manual.	Electrical wiring for EVC16X products
2	Pair	Pairing code is the last six digits of your installer code which can be found on sticker.
3	Finish set-up	Choose the currency for the electricity price and the authorization method. Add NFC tags if necessary.
4	Update device to the latest FW	After pairing, choose your device in the menu, and a notification may suggest updating the firmware version.	How to update
5	Go to installer menu	Go to Settings and choose the Installer menu. To access it, please enter your full 9-digit installer code.	Full process is here
6	Configure your TeltoCharge	To achieve maximum charger power, select all electrical and functional configurations.	Functionality descriptions