Difference between revisions of "First start"

From Wiki
Line 1: Line 1:
Follow these steps to configure your TeltoCharge in correct way:
+
Follow these steps to get started with TeltoCharge in a correct way:
 
<br>
 
<br>
  

Revision as of 00:25, 27 March 2023

Main Page > TeltoCharge > Getting Started > First start

Follow these steps to get started with TeltoCharge in a correct way:

Step Number Description Suggestions Links
1 Connect wires Different wire connections can be found in installation manual. Installation manual
2 Pair Pairing code is the last six digits of your installer code which can be found on sticker. Note: you have to pair to your device in first 5 minutes after turning power on. After 5 minutes, to pair - you will need to reboot the charger. Full process is here
3 Finish set-up Choose: currency for electricity price, authorization, add NFC tags if necessary.
4 Update device to the latest FW After pairing, choose your device in menu and baloon might suggest you to update firmware version, please be patient.
5 Go to installer menu Go to settings, choose installer menu. To access it, please use your full 9 digits installer code. Full process is here
6 Configure your TeltoCharge To achieve maximum charger power, choose all electrical and functional configurations and press Save in the end. You can use suggested configurations below: Functionality descriptions
Additional Suggested configurations Here you can see suggested configurations by your product power to achieve maximum TeltoCharge power

7.4 kW TC
11 kW TC
22 kW TC