Dynamic Load Balancing2 meters

Smart meter and TeltoCharge communication

Smart meter and TeltoCharge communicates via Modbus RS-485 protocol. In order to achieve smooth communication, it is recommended to use communication cable according to this protocol. Check example below

Note: Communication cable should be integrated with power cable.

Supported energy meters

In order to strive for wider applicability and compatibility, we constantly test and add new supported devices into list. All of the supported Energy meters and schematics how to connect them are provided below.  

In order to make Dynamic load balancing and Solar functionality work, please always check:

• if the wiring your Smart energy meter to TeltoCharge is right.
• if the installer menu configuration in mobile application according to your Smart energy meter is right.
  

TeltoCharge supported smart energy meters

Energy meter manufacturer	Technical information	Configuration in mobile application	Wiring scheme
Carlo Gavazzi series 1-3	EM and ET models	Carlo Gavazzi settings	METER -> TELTOCHARGE
Siemens PACxxxx	PAC models	Siemens settings	METER -> TELTOCHARGE
ABB A4x ; B2x	A and B models	ABB settings	METER -> TELTOCHARGE
Eastron SDMxx	SDM models	Eastron settings	METER -> TELTOCHARGE
Inepro PRO380	PRO model	Inepro settings	METER -> TELTOCHARGE
Chint	Chint models	Chint settings	METER -> TELTOCHARGE
Entes	ES models	Entes settings	METER -> TELTOCHARGE
Acrel	Acrel models	Acrel settings	METER -> TELTOCHARGE
More coming soon...