LED indicators
| A | B | C | D | E | F | |||
|---|---|---|---|---|---|---|---|---|
 |
 |
 |
 |
 |
 |
 |
||
| White LED‘s rolling
from the bottom to the top – shows that TeltoCharge is booting up |
White pulsing LED‘s –
shows that TeltoCharge is in standby mode and waiting for action |
Yellow pulsing LED‘s –
shows that TeltoCharge is in standby mode with default settings. |
Yellow LED‘s on –
TeltoCharge is not charging, simplified charging sequence is required. |
Blue LED‘s lights up
from the middle – TeltoCharge do not require permission, it is waiting for EV to initiate charging process (go to state C). |
Blue LED‘s pulsing –
permission to charge is not granted. TeltoCharge requires authorization. |
Green LED‘s rolling upwards from the bottom – TeltoCharge is in charging process. |
RED LED indicators (errors)
| A | Input voltage Error |
| B | Output voltage or current error |
| C | Curent leakage detected |
| D | Connectivity Error |
| E | Temperature Error |
| F | Other Errors (not listed) |