149
edits
Changes
no edit summary
===Solar EV charging===
===Solar EV charging-Measuring device===
'''Measuring device''': The meter should be selected. For UK chargers, it is possible to choose CT clamps.
'''Energy meter address''': This information can be found in the meter settings accessed through the meter display. If the address cannot be located, it is recommended to consult the smart meter manual.
'''Current update interval''': By default, it is set to 3 seconds. However, there may be cases where the user needs to increase this value. For instance, if there are significant distances between the charger and the smart meter.
[[File:Ct-MeasuringDevice.png|frameless|left]]
[[File:Measuring Device-Meter.jpg|frameless|center]]
===== '''Solar EV charging''' =====
[[File:Solar_settings.png|right|frameless|271x271px]]
[[File:Solar_settings.png|right|frameless|271x271px]]
#'''ECO+ surplus minimum''' - This setting requires the minimum value of surplus solar energy to be reached in order to initiate a charging session. If the minimum value of surplus energy is not achieved, the charger will remain in "On hold" mode, awaiting additional surplus energy. <br>
#'''ECO+ surplus minimum''' - This setting requires the minimum value of surplus solar energy to be reached in order to initiate a charging session. If the minimum value of surplus energy is not achieved, the charger will remain in "On hold" mode, awaiting additional surplus energy. <br>