659
edits
Changes
→Date & Time
''By default, NFC cards whitelist is empty.''
''By default, NFC cards whitelist is empty.''
=Load balancing=
Inside load balancing menu user can lower or increase current up to the value which was set by the installer in Installer menu. <br>
For example: you set 32 A in Installer menu option '''Max power from grid''', so in user menu option '''Load balancing''' you will be able to set limitation from 6 A to 32 A.
''By default load balancing is set to 10 A, user can increase this value when he increases Max power from grid option in Installer menu.''
= Schedule =
There is an option to configure individual charging times in order to plan electricity usage or the effectiveness of the electrical grid.<br>
* For the time periods when the car should not be charged, select the ‘Peak hours’ section.<br>
*
* For time periods when the car should be charged, select the ‘Schedule‘ section (click on the '''+''' icon in the upper right corner).<br>
To set charging schedules, choose the desired hours and minutes on the provided clock.<br>
The ‘Repeat schedule‘ function repeats every week on the selected days.
When the ‘Repeat schedule‘ function is disabled, the selected charging schedule will be set only for the week ahead and will stop after the last set day. In this case, the ‘Enable schedule charging‘ function will be automatically disabled. If the ‘Start time‘ is set in the past, the schedule will be active on the next selected day of the week. For example, if the current time is 10 AM on Friday, but the ‘Start time‘ is scheduled for 9 AM on Friday, it will only be active on the following Friday at 9 AM.<br>
The ‘Enable schedule charging‘ function will be disabled at midnight after the end of a schedule.
It is important to optimize the active schedules and ensure that they do not overlap. '''Charger will not allow to save active overlapping schedules.''' However, when schedules are disabled, it can be saved.<br>
If peak hours are set for one time and scheduled charging hours are set later on the same day, there is a contradiction between these two conditions, and the EV will not be charged during the period between them. For example, if peak hours are set from 2 PM to 3 PM and regular scheduled charging hours are set from 5 PM to 7 PM, the EV will be charged only from 5 PM to 7 PM.
= Randomized delay =
The randomized delay function provides an additional layer of protection against grid overloading. In the following cases, a random delay of up to 10 minutes will be applied:
* ''When a vehicle is connected and attempting to initiate the charging process for the first time.''
* ''At the beginning and end of each scheduled charging session.''
* ''After TeltoCharge has been restarted, rebooted, or turned off.''
Although this feature is enabled, it can be manually interrupted by swiping the App slider or using an NFC card.<br>
Using the Randomized delay function along with scheduled charging hours, the EV will only begin charging after waiting for the scheduled time and adding a randomized delay of up to 10 minutes. Similarly, a randomized delay will be applied to the scheduled end of charging.<br>
If the EV charging process is interrupted (e. g. temporary power outage), the randomized delay will still be in effect when the power is restored, further delaying the start of charging.<br>
When OCPP is turned on, the Randomized delay functionality will not be active.
= Errors and warnings =
If TeltoCharge is not working correctly and giving errors or warnings, you will now be able to see more information in the app. All errors and warnings will be sent to the app in real-time.
For all the details check: [https://wiki.teltonika-energy.com/view/LED_indicators LED indicators list]
= Live data =
Live data from TeltoCharge. It will be possible to see such data as:
* ''Charging type''
* ''Phase used''
* ''Temperature''
* ''Max allowed current''
* ''Phase voltages (input and output)''
= Connectivity=
= Connectivity=
To connect Teltocharge to Wi-Fi, just follow these steps:
To connect Teltocharge to Wi-Fi, just follow these steps:
*Open Wi-Fi tab;
*''Open Wi-Fi tab;''
*Enable it with the slider;
*''Enable it with the slider;''
*Select your network from provided list;
*''Select your network from provided list;''
*Insert password and press save;
*''Insert password and press save;''
*Wait until product is connected successfully;
*''Wait until product is connected successfully;''
==Mobile ==
==Mobile ==
==OCPP==
==OCPP==
Open Charge Point Protocol 1.6 is used to connect TeltoCharge to 3rd party Cloud servers. At the moment charger is able to achieve ''"Core"'' and ''"Local auth list management"'' functions.
Open Charge Point Protocol 1.6 is used to connect TeltoCharge to 3rd party Cloud servers. At the moment charger is able to achieve ''"Core"'', ''"Local auth list management"'' and ''"Smart charging"'' functions.
Before connecting TeltoCharge to any 3rd party Charge point management server, firstly check if server is compatible with OCPP 1.6 JSON.
Before connecting TeltoCharge to any 3rd party Charge point management server, firstly check if server is compatible with OCPP 1.6 JSON.
If server provider supports this OCPP version, to connect, user needs to type in server URL address and Charge point identity. After all settings are set, enable OCPP with a slider and press Save at the bottom of the screen. User also can see status if charger was connected successfully or not.
If server provider supports this OCPP version, to connect, user needs to type in server URL address and Charge point identity. After all settings are set, enable OCPP with a slider and press Save at the bottom of the screen. User also can see status if charger was connected successfully or not.
More information anout OCPP you can find [[OCPP FAQ|here]].
More information about OCPP you can find [[OCPP FAQ|here]].
==Ethernet ==
==Ethernet ==
==Date & Time==
==Date & Time==
In this tab user can set date and time according to the region in which product is going to be used. It is recommended to synchronize time with phone (button for this action is provided).
In this tab user can set date and time according to the region in which product is going to be used. '''It is recommended to synchronize''' time with phone (button for this action is provided).
=Device info=
=Device info=
Here you can download troubleshoot file. <br>
Here you can download troubleshoot file. <br>
It will be used only by the Customer support engineers while solving risen issues.
It will be used only by the Customer support engineers while solving risen issues.
=Installer menu=
=Installer menu=
''By default this setting is turned off''
''By default this setting is turned off''
==Connection type==
==Difference between phases==
This function let user to select how theirs power input is wired - in Star network or Delta network style.
This function let user to select how theirs power input is wired - in Star network or Delta network style. <br>
120° - Star (Wye) and Delta; <br>
180° - Delta and split phase.
In the case of Europe, most Star (Wye) and Delta connections will have a phase difference of 120°. In North America, the phase shift can be 180° when split phase connection type is used or in the case of Delta connection with center tap on one leg.
''Note: these parameters are used only for the power consumption (kWh) calculations and not influence operation of the charger.''
''Global product: By default this setting is marked as Star''<br>
''Global product: By default this setting is marked as 120° ''<br>
''North American product: By default this setting is marked as Delta''
''North American product: By default this setting is marked as 180°''
==Use neutral as phase==
==Use neutral as phase==
There is a possibility to reboot charger through the Teltonika Energy app.
There is a possibility to reboot charger through the Teltonika Energy app.
[[Category: Mobile app]]
[[Category: Product guides]]