7.4 kW TeltoCharge Suggested configuration

Revision as of 06:03, 3 April 2023 by PauliusKo (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Introduction

    Here you can find information about Suggested configuration of 7.4 kW power TeltoCharge installer menu parameters according to your electrical grid. You can run this TeltoCharge only on 1-phase electrical wiring.

    1 phase (1L+N+PE) | voltage between L-N 230V ± 10%