Physical Device Installation Guide

Press on the picture for shortened guide on how to physically install the device

First start guide

With easy-to-follow instructions, you'll be up and running in no time, making the most of your new experience.

Mandatory Steps
Step	Explanation	Information
Connect wires	Connection type is detected automatically	Link to all available connections/wirings
Pair	Pairing code can be found on the sticker
Finish set-up	Possibility to change currency, kWH price and name of charging station. Also add NFC card is necessary
Update FW	After finish the set-up window, pop-up about available update will show up. Proceed with the suggestion \|\|
Installer menu	All important settings are hidden under secured menu that could be accessed with code
*Use caseBold text	Different configuration examples.	Link to use cases

Follow these detailed steps to get started with TeltoCharge in a correct way:

Step Number	Description	Suggestions	Links
1	Download EV Charging APP		For Android For Apple
2	Pair	Pairing code can be found on the sticker.	Pairing process
3	Update device to the latest FW	After pairing, choose your device in the menu, and a notification may suggest updating the firmware version.	How to update
4	Configure your EVC2	Follow steps in device configuration guide and using Teltonika EV Charging app set parameters according to your site requirements.	Possible settings
5	Connect to Wifi	After ensuring the device is configured according to your site requirements, open "Connectivity" window in the app and connect device to the internet via Wi-Fi or LAN.	Connect to Wifi or LAN
6	Enable OCPP	Once the device is connected to the internet, go to the "OCPP" tab in "Connectivity" window and connect the charger to the Powerverse App by entering this URL: wss://ocpp.powerverse.com:443/ note: Make sure your phone doesn't auto correct wss.	Connect to OCPP
Additional	LED indicators	Meaning of TeltoCharge LED indicators.	LED indicators