LED indicators
| A | B | C | D | E | F | G | H | I | J |
|---|---|---|---|---|---|---|---|---|---|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| White LED‘s rolling from the bottom to the top – shows that TeltoCharge is booting up | White pulsing LED‘s – shows that TeltoCharge is in standby mode and waiting for action | Yellow pulsing LED‘s – shows that TeltoCharge is in standby mode with default settings. | Yellow LED‘s on – TeltoCharge is not charging, simplified charging sequence is required. | Blue LED‘s lights up from the middle – TeltoCharge do not require permission, it is waiting for EV to initiate charging process (go to state C). | Blue LED‘s pulsing – permission to charge is not granted. TeltoCharge requires authorization. | Green LED‘s pulsing - Initialisation of charging. | Green LED‘s rolling upwards from the bottom – TeltoCharge is in charging process. | Green LED‘s on – TeltoCharge finished charging, EV is fully charged | Purple LED‘s on – TeltoCharge requires ventilation (charging is done in state D). |
| Open installer menu via Teltonika Energy app, set and save settings. | Open installer menu via Teltonika Energy app and select to allow simplified charging sequence | Authorize yourself with app or NFC card. | Open installer menu via Teltonika Energy app and select that charging location is ventilated. To select that charger must be installed in ventilated location. |
RED LED indicators (errors)
| A | B | C | D | E | F | G |
|---|---|---|---|---|---|---|
 |
 |
 |
 |
 |
 |
|
| Input voltage error | Output voltage/current error | Current leakage detected | Connectivity error | Temperature error | Other errors | Faulty connection to EV |
| Overvoltage;
Undervoltage; Wrong wiring; |
Overvoltage;
Undervoltage; Output current; |
Current leakage detected | Cable lock;
PP fail; Car diode; |
Temperature reached 80°C | -12V;
Humidity is too high; Humidity communication error; |
CP fail |
