LED indicators

A		White LED‘s rolling from the bottom to the top – shows that TeltoCharge is booting up
B		White pulsing LED‘s – shows that TeltoCharge is in standby mode and waiting for action
C		Yellow pulsing LED‘s – shows that TeltoCharge is in standby mode with default settings.
D		Yellow LED‘s on – TeltoCharge is not charging, simplified charging sequence is required.
E		Blue LED‘s lights up from the middle – TeltoCharge do not require permission, it is waiting for EV to initiate charging process (go to state C).
F		Blue LED‘s pulsing – permission to charge is not granted. TeltoCharge requires authorization.
G		Green LED‘s pulsing - Initialisation of charging.
H		Green LED‘s rolling upwards from the bottom – TeltoCharge is in charging process.
I		Green LED‘s on – TeltoCharge finished charging, EV is fully charged
J		Purple LED‘s on – TeltoCharge requires ventilation (charging is done in state D).

A	B	C	D	E	F	G	H	I	J
White LED‘s rolling from the bottom to the top – shows that TeltoCharge is booting up	White pulsing LED‘s – shows that TeltoCharge is in standby mode and waiting for action	Yellow pulsing LED‘s – shows that TeltoCharge is in standby mode with default settings.	Yellow LED‘s on – TeltoCharge is not charging, simplified charging sequence is required.	Blue LED‘s lights up from the middle – TeltoCharge do not require permission, it is waiting for EV to initiate charging process (go to state C).	Blue LED‘s pulsing – permission to charge is not granted. TeltoCharge requires authorization.	Green LED‘s pulsing - Initialisation of charging.	Green LED‘s rolling upwards from the bottom – TeltoCharge is in charging process.	Green LED‘s on – TeltoCharge finished charging, EV is fully charged	Purple LED‘s on – TeltoCharge requires ventilation (charging is done in state D).

RED LED indicators (errors)

A	Input voltage Error
B	Output voltage or current error
C	Curent leakage detected
D	Connectivity Error
E	Temperature Error
F	Other Errors (not listed)