Jump to content
  • EN

Use neutral as phase

From Teltonika Energy Wiki
Revision as of 23:25, 30 March 2023 by PauliusKo (talk | contribs) (Created page with "==Use neutral as phase== This function allows user to use electrical network without Neutral wire. L1 then must be connected to N(L1) pin in input terminal. ''Global product:...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Use neutral as phase

This function allows user to use electrical network without Neutral wire. L1 then must be connected to N(L1) pin in input terminal.

Global product: By default this setting is turned OFF

Retrieved from "https://wiki.teltonika-energy.com/index.php?title=Use_neutral_as_phase&oldid=3554"