Release note FW 1.9.5

To get the latest features and bug fixes, please update your charger's firmware and Android/iOS

app to latest version (v1.9.0)

New features

Application in multiple languages

From now on, TeltoCharge application interface can be represented in 11 different languages.

List of included languages:

English
Lithuanian
French
Spanish
Italian
German

Russian
Turkish
Portuguese
Polish
Arabic

NOTE:

Language can be changed only in station selection

window

Timer for buzzer

From this FW version, in case error buzzer is activated, signaling noise will be stoppedafter 15 seconds.

Notification in red ligh LEDs on product and in mobile application will remain ON.

Improvements

Default section Peak hours adjustement

In products EVC16/161,

Default hours

settings will be enabled during first time setup.

In other product families,

Default hours

settings will be disabled.

Solar feature expansion

Teltocharge Solar charging feature will be available in households with grids that donot use neutral wire (Belgium, North America, etc.)

EVC13 product family supports only single phase meters.

NOTE:

This setting can be changed anytime in Schedule section

Improvements

Solar feature support with CT clamps

Energy meters

CT clamps

From now on Teltocharge EVC160/EVC161 will allow users to use Solar chargingfunctionality by installing CT clamps in the grid.

It is now possible to choose what to use according to convenience:

LED indicators with OCPP enabled optimization

LED indication added to notify when RemoteStartTransaction command isreceived.

LEDs indication will be the same as when charger is reserved.

Solar charging feature logic adjusted

When charging is stopped with NFC or App and new charging mode is selectedfrom dropdown list - charging automatically starts by using selected mode.

When authorization is required to start charging and new charging mode isselected from dropdown list - charging automatically starts by using selectedmode.

When authorization is required to start charging and main slider or NFC is usedto authorize - charging automatically starts by using default mode.

When charging is stopped with NFC or App and main slider is used to startcharging again - charging automatically starts by using default mode.

With this firmware release, Solar charging logic will include these additions:

New error codes in OCPP

EVCommunicationError

OverVoltage

PowerMeterFailure

UnderVoltage

New error codes include:

These

codes are sent on according Fault state if triggered.

Performance optimization

LED indications optimization

Timer stabilization

Minor optimization

APP

FW

Fixes

Wiki page: