Installation process

A - Place the drilling template on the wall and mark the three fixing points.

B - Drill holes where the fixing points are marked.

C - Insert the wall plugs into the fixing holes.

1. Fix the device on the wall by inserting the self-tapping screws (start with the top screw and make sure the housing is horizontal).

2. Make sure the cable grommet is properly mounted on the cables (AC input cable and Ethernet cable).

A - T/N single phase set up;

B - T/N Three phase set up;

C - IT/TT three phase set up;

D - IT/TT single phase set up;

Insert a nano SIM card into card slot.

A - Place a middle panel on the housing;

B - Fix it using DIN912 M3x8 screws;

A - Insert the upper part of the front plate to the fixing holes and fix the plate;

B - Fix it using DIN912 M3x8 screws;

C - Lock the top of the plate;

D - Lock the bottom of the plate;

E - Fix it using DIN912 M3x8 screws;