Jump to content
  • EN

2x RS485 support

From Teltonika Energy Wiki
Revision as of 09:24, 28 October 2026 by FiodorF (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > Main Page EVC2 > 2x RS485 support

2x RS-485 support

This terminal is located on the interface board. It has two separate RS-485 ports:

  • Meter port: for dynamic load balancing (DLB), solar integration or a kWh meter.
  • DLM port: for connecting dynamic load management (DLM) devices.

Each port is labelled on the board.

RS-485 ports location on the interface board

DLB support examples

DLB wiring examples

DLM support examples

DLM wiring examples

Retrieved from "https://wiki.teltonika-energy.com/index.php?title=2x_RS485_support&oldid=5987"