From Teltonika Energy Wiki
Latest Firmware Version
| Version
|
Date
|
New features and settings
|
Bug fixes and improvements
|
| EVC2xx
V2.3.0
|
2026.08.11
|
|
|
Previous Firmware versions
| Version
|
Date
|
New features and settings
|
Bug fixes and improvements
|
| EVC2xx V2.2.8
|
2026.06.18
|
|
- Improved connectivity to remote management system.
|
| EVC2xx V2.2.7
|
2026.06.04
|
|
- Fixed OCPP wrong StatusNotification errorCode after trigger
- Fixed troubleshoot file high/low voltage naming
- Fixed 3phase delta grid failing to check input voltage
|
| EVC2xx V2.2.6
|
2026.05.01
|
- Added new solar charging modes for Dynamic Load Management, including Solar Only, ECO, and Hybrid modes.
- Added new Dynamic Load Management capabilities, including potential-free contact support, dynamic IP device discovery and reconnection, and configurable 1-phase charging behavior.
- Expanded Modbus meter support with additional Eastron and ABB meter models.
- Added installer setting for IT grid voltage sampling.
- Added an NFC reader cooldown to prevent accidental repeated actions.
|
- Improved charging session recovery, troubleshooting logs, and reboot reporting after power loss events.
- Improved solar charging and Dynamic Load Management stability, including power limit handling, Modbus TCP communication, ECO mode synchronization, and DLM failsafe behavior.
- Improved communication stability for Bluetooth, LAN, and WebSocket connections.
- Improved charging session energy graph accuracy and HomeWizard P1 meter data handling.
- Improved OCPP configuration request handling and tamper event reporting.
- Improved internal time synchronization.
|
| EVC2xx V2.1.5
|
2026.01.06
|
|
- NFC scanning module improvements
- Fixed bugs where the settings were not being saved while switching power selector
- Improved OCPP handling when starting/stopping charge
- Various bug fixes related to parameter and information handling
|
| EVC2xx V2.1.0
|
2025.11.24
|
- Support for Shelly 3PRO meters added
- Modbus TCP device control enabled
- New settings: Max group load & Max grid load for DLM/DLB functions
- 2x RS-485 port support
- EVC2XX potential-free contact support
- Power rotary switch implementation for easier setup
- Automatic grid type detection and phase rotation support
- LAN-based device control via EV charging app, previously it was possible through Bluetooth only
- Automatic firmware updates support
- Changed installer menu code to 4 digits
|
- Various metering and charging bug fixes
- Various Modbus and OCPP communication protocol enhancements
- Charger stability issues resolved
- Bluetooth, NFC and UI features improved
|
Updating
Use our app to update the station manually
- Use app and go to settings, scroll down and press Device info;
- Press Check for updates;
- At the top, current firmware version can be found.
- User has 2 options: to update from our cloud or by manually uploading a firmware file to the charger.
