LED indicators: Difference between revisions

Revision as of 11:38, 8 June 2022


A	B	C	D	E	F	G	H	I	J

White LED‘s rolling from the bottom to the top – shows that TeltoCharge is booting up	White pulsing LED‘s – shows that TeltoCharge is in standby mode and waiting for action	Yellow pulsing LED‘s – shows that TeltoCharge is in standby mode with default settings.	Yellow LED‘s on – TeltoCharge is not charging, simplified charging sequence is required.	Blue LED‘s lights up from the middle – TeltoCharge do not require permission, it is waiting for EV to initiate charging process (go to state C).	Blue LED‘s pulsing – permission to charge is not granted. TeltoCharge requires authorization.	Green LED‘s pulsing - Initialisation of charging.	Green LED‘s rolling upwards from the bottom – TeltoCharge is in charging process.	Green LED‘s on – TeltoCharge finished charging, EV is fully charged	Purple LED‘s on – TeltoCharge requires ventilation (charging is done in state D).
		Open installer menu via Teltonika Energy app, set and save settings.	Open installer menu via Teltonika Energy app and select to allow simplified charging sequence		Authorize yourself with app or NFC card.				Open installer menu via Teltonika Energy app and select that charging location is ventilated. To select that charger must be installed in ventilated location.

RED LED indicators (errors)


A	B	C	D	E	F	G
						File:TeltoCharge LEDS FaultyConnection.png
Input voltage error	Output voltage/current error	Current leakage detected	Connectivity error	Temperature error	Other errors	Faulty connection to EV
Overvoltage; Undervoltage; Wrong wiring;	Overvoltage; Undervoltage; Current is higher than indicated;	Current leakage detected	Cable lock; PP; Car diode;	Temperature reached 80°C	-12V; Humidity is too high; Humidity communication error;	CP fail

@@ Line 34: / Line 34: @@
 |Green LED‘s on – TeltoCharge finished charging, EV is fully charged
 |Purple LED‘s on – TeltoCharge requires ventilation (charging is done in state D).
+|-
+|
+|
+|Open installer menu via Teltonika Energy app, set and save settings.
+|Open installer menu via Teltonika Energy app and select to allow simplified charging sequence
+|
+|Authorize yourself with app or NFC card.
+|
+|
+|
+|Open installer menu via Teltonika Energy app and select that charging location is ventilated. To select that charger must be installed in ventilated location.
 |}
 ===RED LED indicators (errors)===
-[[File:TeltoCharge_Installation_LEDIndicators_LEDIndicatorsErrors.png|alt=|border|frameless|426x426px]]
+{| class="wikitable"
-{| class="wikitable" style="text-align: center;"
+|+
-|A||Input voltage Error
+!A
+!B
+!C
+!D
+!E
+!F
+!G
 |-
-|B||Output voltage or current error
+|[[File:TeltoCharge LEDS InputVoltageError.png|center|frameless]]
+|[[File:TeltoCharge LEDS OutputVoltageCurrentError.png|center|frameless]]
+|[[File:TeltoCharge LEDS CurrentLeakageDetected.png|center|frameless]]
+|[[File:TeltoCharge LEDS ConnectivityError.png|center|frameless]]
+|[[File:TeltoCharge LEDS TemperatureError.png|center|frameless]]
+|[[File:TeltoCharge LEDS OtherErrors.png|center|frameless]]
+|[[File:TeltoCharge LEDS FaultyConnection.png|center|frameless]]
 |-
-|C||Curent leakage detected
+|Input voltage error
+|Output voltage/current error
+|Current leakage detected
+|Connectivity error
+|Temperature error
+|Other errors
+|Faulty connection to EV
 |-
-|D||Connectivity Error
+|Overvoltage;
-|-
+Undervoltage;
-|E||Temperature Error
-|-
+Wrong wiring;
-|F||Other Errors (not listed)
+|Overvoltage;
+Undervoltage;
+Current is higher than indicated;
+|Current leakage detected
+|Cable lock;
+PP;
+Car diode;
+|Temperature reached 80°C
+| -12V;
+Humidity is too high;
+Humidity communication error;
+|CP fail
 |}
 [[Category: Installation]]