Power Selector Switch

Physical power selector switch

This switch can be found on the interface board. It could turned to to limit Maximum device output. By changing the rotary switch position it is possible to limit charger’s max output to the car.

Default position (position 0) sets maximum possible output power. Possible switch positions differ between different modification devices.

If rotary switch is set to an invalid or reserved position it will not charge and indicate it the following ways:

• Yellow LEDs (on previous EVC1XX models we used this LED sequence to indicate, that default settings are used. On EVC2XX we removed this LED sequence dependency on changing installer settings and only made it indicate invalid rotary switch position).

• Error in app (Incorrect power rotary switch position).

When power rotary switch position is adjusted to or is left in the default position, static load balancing value adjusts automatically to configured max power. But later it will be possible to adjust it via app.

EU/UK 32A switch values

	Position	Current, A	1P, W	3P, W	LED
Default	0	32	7360	22080	White
	1	6	1380	4140	White
	2	10	2300	6900	White
	3	13	2990	8970	White
	4	16	3680	11040	White
	5	20	4600	13800	White
	6	25	5750	17250	White
	7	28	6440	19320	White
Reserved	8	0	0	0	Yellow
Reserved	9	0	0	0	Yellow