Difference between revisions of "SPD - surge protection device"

From Wiki
(Created page with "== Disclaimer == === SPD - surge protection device === In order to successfully use Teltocharge product, users electrical grid must include dedicated Surge Protective Device (...")
 
m (Protected "SPD - surge protection device" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
(No difference)

Revision as of 18:06, 7 February 2023

Main Page > TeltoCharge > Getting Started > SPD - surge protection device

Disclaimer

SPD - surge protection device

In order to successfully use Teltocharge product, users electrical grid must include dedicated Surge Protective Device (SPD in short). SPD must be installed by experienced electrician, who installs charger on the power line with SPD integrated upstream. Firstly, check if house grid already has it pre-installed.

Surge protective device is not included into the package and have to be bought separately. Legitimate options:

Installation option 1:

Surge protective device (SPD) type 1 with max continuous working voltage = 275VAC and maximum transient voltage tolerance of 2500 V. Device must be certified according to the standard IEC 61643 - 11.

Installation option 2:

Surge protective device (SPD) combined type 1&2 with max continuous working voltage = 275VAC and maximum transient voltage tolerance of 2500 V. Device must be certified according to the standard IEC 61643 - 11.

Before buying, please consult with the company, which installs the product.

BACK TO INSTALLATION PAGE