First Start Guide EVC2: Difference between revisions
No edit summary |
|||
| Line 131: | Line 131: | ||
3. Select max grid load after successful connection. | 3. Select max grid load after successful connection. | ||
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/ | | style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/0/01/Network_meters_11.png How to enable Network meters] | ||
|- | |- | ||
| style="padding: 8px;" |5 | | style="padding: 8px;" |5 | ||
Latest revision as of 15:08, 19 March 2026
Physical Device Installation Guide
INSTALLATION MANUAL
Press on the picture for shortened guide on how to physically install the device
First start guide
Follow these detailed steps to get started with EVC2 in a correct way:
| Step Number | Description | Notes | Links |
|---|---|---|---|
| 1 | Download EV Charging APP | For Android | |
| 2 | Pair | Pairing code can be found on the sticker. | Pairing process |
| 3 | Update device to the latest FW | After pairing, choose your device in the menu, and a notification may suggest updating the firmware version. | How to update |
| 4 | Configure your EVC2 | Follow steps in device configuration guide and using Teltonika EV Charging app set parameters according to your site requirements. | - |
Configuration Setup Possibilities
Home installation configuration with CT Clamps
| Step Number | Description | Suggestions | Links |
|---|---|---|---|
| 1 | CT clamp | CT clamps installation option in the wiki link on the right | CT clamps |
| 2 | Go to Installer Settings via EV Charging APP | Enter the installers menu by entering the password | Installer menu access |
| 3 | Go to Load Balancing section | 1. Select CT Clamp as measuring device.
2. Enable Load Balancing and press on DLB CT button. (Before calibration, ensure at least one CT is connected to the device and that its measuring end is not clamped around the cable) 3. Calibrate your CT clamps. |
How to enable CT clamps |
| 4 | Test setup | 1. Plug in cable from charger to EV, but don't start charging.
2. Go to Diagnostics window in the app and check if Max allowed current is more than at least 6 A to start charging. |
1. No limitations |
Home installation configuration with Modbus RTU meter
| Step Number | Description | Suggestions | Links |
|---|---|---|---|
| 1 | Modbus RTU meters | Modbus RTU installation option in the wiki link on the right | Modbus RTU meters |
| 2 | Go to Installer Settings via EV Charging APP | Enter the installers menu by entering the password | Installer menu access |
| 3 | Go to Load Balancing section | 1. Select Modbus RTU meter as measuring device.
2. Enable Load Balancing and search for the meter. 3. Select max grid load after successful connection. |
How to enable Modbus RTU meters |
| 4 | Test setup | 1. Plug in cable from charger to EV, but don't start charging.
2. Go to Diagnostics window in the app and check if Max allowed current is more than at least 6 A to start charging. |
1. No limitations |
Home installation configuration with Network meter
| Step Number | Description | Suggestions | Links |
|---|---|---|---|
| 1 | Network TCP/IP meters | Network meter installation option in the wiki link on the right | Network meters |
| 2 | Go to Installer Settings via EV Charging APP | Enter the installers menu by entering the password | Installer menu access |
| 3 | Connect device to the network | Enable one of the connectivity options on your device via the app | Connectivity |
| 4 | Go to Load Balancing section | 1. Select Network meter as measuring device.
2. Enable Load Balancing and search for the meter. 3. Select max grid load after successful connection. |
How to enable Network meters |
| 5 | Test setup | 1. Plug in cable from charger to EV, but don't start charging.
2. Go to Diagnostics window in the app and check if Max allowed current is more than at least 6 A to start charging. |
1. No limitations |
Enabling solar charging configuration
| Step Number | Description | Suggestions | Links |
|---|---|---|---|
| 1 | Go to Installer Settings via EV Charging APP | Enter the installers menu by entering the password | Installer menu access |
| 2 | Enable solar charging option | Select the measurement method the device is using
and enable solar charging functionality |
Solar charging functions |
| 3 | Check available charging modes | 1. Select Network meter as measuring device.
2. Enable Load Balancing and search for the meter. 3. Select max grid load after successful connection. |
Enable solar charging modes |
| 4 | Test setup | 1. Plug in cable from charger to EV, but don't start charging.
2. Go to Diagnostics window in the app and check if Max allowed current is more than at least 6 A to start charging. 3. Solar panel generation can be seen as export to grid |
1. No limitations |