Jump to content
  • EN

Eastron settings: Difference between revisions

From Teltonika Energy Wiki
← Older edit
VisualWikitext
No edit summary
No edit summary
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
==== RS485 parameters for energy meters Eastron SMD54-M ; SMD72D-M V2  ====
<div style="font-family:'Inter','Helvetica Neue',Arial,sans-serif; line-height:1.6;">
''Note 1: Energy meter parameters should match EVSE default parameters.'' <br>
''Note 2: Eastron energy meters booting time is longer than others.''


{| class="wikitable" style="text-align: center; border: 1px solid #0054A6; font-family: arial, sans-serif; width: 60%;"
== <span style="font-family:'Oswald','Arial Narrow',sans-serif; text-transform:uppercase; letter-spacing:0.02em;">RS-485 parameters for Eastron SDM meters</span> ==
|-
 
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" | RS485 parameter
''Note 1: The energy meter's parameters must match the EVSE (charger) parameters. The default values are listed below.''
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" | EVSE default parameter value (configurable in mobile app)
 
''Note 2: Eastron energy meters take longer to boot than other meters.''
 
{| class="wikitable" style="text-align:center; width:80%;"
! style="background:#001A77; color:#FFFFFF; border-color:#001A77; font-family:'Oswald','Arial Narrow',sans-serif; text-transform:uppercase; letter-spacing:0.03em; font-weight:500; padding:8px;" | RS-485 parameter
! style="background:#001A77; color:#FFFFFF; border-color:#001A77; font-family:'Oswald','Arial Narrow',sans-serif; text-transform:uppercase; letter-spacing:0.03em; font-weight:500; padding:8px;" | EVSE (charger) default value (configurable in the app)
|-
|-
| style="padding: 8px;" | Modbus adress
| Modbus address || 1
| style="padding: 8px;" | 1
|-
|-
| style="padding: 8px;" | Baud rate
| Baud rate || 9600
| style="padding: 8px;" | 9600
|-
|-
| style="padding: 8px;" | Parity
| Parity || None
| style="padding: 8px;" | None
 
|-
|-
| style="padding: 8px;" | Stop bits
| Stop bits || 1
| style="padding: 8px;" | 1
 
|}
|}


==== How to configure Smart energy meter in mobile application ====
== <span style="font-family:'Oswald','Arial Narrow',sans-serif; text-transform:uppercase; letter-spacing:0.02em;">Configuring the meter in the mobile application</span> ==
 
''Note: Users could use two meters with different addresses. Additionally, there will be settings for these energy meters in the installer menu (these settings are the same for both energy meters).''
 
 
1. Make sure you have updated mobile application and firmware version of the charger to the latest. (←[[Firmware]] and [https://apps.apple.com/lt/app/teltonika-energy/id1618750750 iOS] / [https://play.google.com/store/apps/details?id=com.teltonika.ems.ev&hl=en&gl=US Android]).
 
2. Go to installer menu in your application and set general parameters from table above:
 
[[file:General_meter_settings.png|alt=|left|frameless|]]
 
 
 
 
 
 
 
 
 
 
 
 
3. To get data form energy meter, you will need to set the energy meter address in the “Dynamic load balancing” section:
 
[[file:Dynamic_load_balancing.png|alt=|left|frameless|]]
 
 
 
 
 
 
 
 
 
 
 
 
 
 
4. Also, you will need to set the kWh meter address in the “Meter for power consumption calculation” section if you want to use it:
 
[[file:Meter_for_power_consumption_calculation.png|alt=|left|frameless|]]
 
 
 
 
 
 
 


''Note: You can use two meters with different addresses. Both meters share the same settings in the installer menu.''


# Make sure your charger firmware and application are updated to the latest version (see [[Release notes: Firmware]] and the app for [https://apps.apple.com/lt/app/teltonika-energy/id1618750750 iOS] / [https://play.google.com/store/apps/details?id=com.teltonika.ems.ev&hl=en&gl=US Android]).
# Enter the Installer menu, select Load Balancing, then Modbus RTU.<br>[[File:Settings-to-rtu.png|frameless|alt=Path to Modbus RTU settings|576x576px]]
# If the charger does not recognise the meter, go to Manual Setup and choose your meter model from the presets, or enter the values from the RS-485 parameters table manually.<br>[[File:Mod-to-manual.png|frameless|alt=Manual setup screen|576x576px]]


To find out specific settings, you will need to read the energy meter's documentation.
Once the meter is successfully configured, press Connect. You will receive a confirmation screen and the status will change. Possible statuses:
* '''Connected''' – the meter is configured correctly.
* '''Disconnected''' – a wrong parameter value is set on the charger, or the meter is not wired correctly.
* '''Wrong type''' – the meter configuration does not match the connected meter.
* '''Not supported''' – the connected meter is not compatible with the installation.


For detailed settings, refer to the energy meter's official documentation.


</div>


← [[Smart energy meters]]
[[Category:Smart energy meter mastersheet]]

Latest revision as of 13:56, 28 October 2026

Main Page > Main Page EVC2 > Smart energy meter mastersheet > Eastron settings

RS-485 parameters for Eastron SDM meters

Note 1: The energy meter's parameters must match the EVSE (charger) parameters. The default values are listed below.

Note 2: Eastron energy meters take longer to boot than other meters.

RS-485 parameter EVSE (charger) default value (configurable in the app)
Modbus address 1
Baud rate 9600
Parity None
Stop bits 1

Configuring the meter in the mobile application

Note: You can use two meters with different addresses. Both meters share the same settings in the installer menu.

  1. Make sure your charger firmware and application are updated to the latest version (see Release notes: Firmware and the app for iOS / Android).
  2. Enter the Installer menu, select Load Balancing, then Modbus RTU.
    Path to Modbus RTU settings
  3. If the charger does not recognise the meter, go to Manual Setup and choose your meter model from the presets, or enter the values from the RS-485 parameters table manually.
    Manual setup screen

Once the meter is successfully configured, press Connect. You will receive a confirmation screen and the status will change. Possible statuses:

  • Connected – the meter is configured correctly.
  • Disconnected – a wrong parameter value is set on the charger, or the meter is not wired correctly.
  • Wrong type – the meter configuration does not match the connected meter.
  • Not supported – the connected meter is not compatible with the installation.

For detailed settings, refer to the energy meter's official documentation.

Retrieved from "https://wiki.teltonika-energy.com/index.php?title=Eastron_settings&oldid=6019"