Latest revision as of 13:22, 13 March 2026

Integrating Teltonika EVC stations with OCPP 1.6 JSON

This guide explains how to integrate Teltonika EVC stations with your existing system using the OCPP 1.6 JSON protocol.

Getting started

Before you begin, you will need the following:

Teltonika EVC station is installed and configured.
Teltonika EVC station has access to the internet.
Knowledge of the OCPP 1.6 JSON protocol.

Steps

1. Configure the charging station to connect to your OCPP 1.6 JSON server. You will need to know the IP address or domain name of your server and the port number for the OCPP 1.6 JSON protocol.

2. Set up a charging station account on your OCPP 1.6 JSON server. You will need to provide the following information:

   * Charging station ID: This is a unique identifier for your charging station.
   * Charging station type: Specify the type of charging station you have. (AC)
   * Other settings as required by your OCPP 1.6 JSON server.

3. Connect the charging station to your OCPP 1.6 JSON server. The charging station will communicate with your server using the OCPP 1.6 JSON protocol.

4. Test the connection by starting a charging session from your OCPP 1.6 JSON server.

5. Monitor the charging station from your OCPP 1.6 JSON server. You will be able to view the charging status, energy usage, and other important information about the charging station (for configuration keys available at the moment from Teltonika EVC station please communicate with your Sales manager or directly through Teltonika Energy VIP HelpDesk).

How to connect Teltonika EVC stations to chosen OCPP provider

Connect Teltonika EVC station to the internet - make sure, that the charging station has the internet connection. (all types are acceptable)

Connect Teltonika EVC station to the chosen OCPP server

OCPP provider must give you info about:

URL address - URL address must end with "/"
Charge point ID - Most of the time it's the serial number of the charging station

When you have that information, insert it as shown in the picture below and press save.

COMPATIBLE SOFTWARE PROVIDERS FOR OCPP INTEGRATION

This section provides an overview of the software providers that have been tested and proven compatible with Teltonika EVC station using the OCPP 1.6 JSON (Open Charge Point Protocol).

→For detailed Teltonika EVC stations OCPP documentation contact Teltonika Energy Technical Support team via HelpDesk.←

Segments description:

Public Charging Networks - managing large networks of public EV charging stations.

Real-time monitoring, dynamic pricing, user authentication, remote diagnostics, and reporting.

Commercial and Fleet Charging - supporting commercial fleets and workplace charging solutions.

Fleet management tools, scheduled charging, energy usage reporting, and integration with fleet management systems.

Residential Charging Solutions - providing home EV charging management for individual users.

User-friendly interfaces, mobile app control, energy usage tracking, and integration with smart home systems.

Retail and Hospitality Charging - offering EV charging as an amenity at retail locations, hotels, and restaurants.

Customer engagement tools, loyalty programs integration, payment processing, and usage analytics.

Tested Software Providers

The software providers listed here have undergone comprehensive testing with Teltonika EVC station hardware, ensuring that they meet standards for performance and reliability.

For integration of your OCPP software, please contact Teltonika Energy Technical Support team via HelpDesk.

List of supported platforms

Software Vendor	Public Charging Networks	Commercial and Fleet Charging	Residential Charging Solutions	Retail and Hospitality Charging	Official page
Focus EV		+	+	+	FOCUS EV
Monta	+	+	+	+	MONTA
EEVY	+	+	+	+	EEVY
Ampeco	+	+			AMPECO
LastMilesSolutions	+	+			LMS
GreenFlux	+	+		+	GREENFLUX
SaasCharge	+	+		+	SAASCHARGE
Daloop		+			DALOOP
Go To-U	+			+	GO TO-U
Tap Electric	+	+	+	+	TAP ELECTRIC
Clenergy EV	+	+	+	+	Clenergy EV
Enerlink	+	+	+	+	ENERLINK
E-Flux	+	+	+	+	E-FLUX
PlugFuse	+	+	+	+	PLUGFUSE
eMabler	+	+	+	+	eMABLER

OCPP IMPLEMENTATION

Our station can accept various messages and configuration keys. The following is a list of supported standard messages, key names and values


Supported messages
Message	Comment
Authorize
BootNotification
ChangeAvailability
ChangeConfiguration
ClearCache	Authorization Cache with max 20 entries
DataTransfer	No custom commands
GetConfiguration	Max 60 elements per request
Heartbeat
MeterValues	In MeterValuesSampledData, MeterValuesAlignedData and StopTxnSampledData only. Supported measurands: Energy.Active.Import.Register,Current.Import,Current.Offered, Temperature,Voltage,Power.Active.Import. Minimum interval 5s
RemoteStartTransaction
RemoteStopTransaction
Reset
StartTransaction
StopTransaction
StatusNotification
UnlockConnector	For socket version charger only
Local Auth List Management
GetLocalListVersion
SendLocalList
LocalAuthListMaxLength	Max 50 entries
Smart Charging
SetChargingProfile
GetCompositeSchedule	Max GetCompositeSchedule.req duration 24h
ClearChargingProfile
Remote Trigger
TriggerMessage
Reservation
ReserveNow
CancelReservation
Firmware Management
GetDiagnostics
DiagnosticsStatusNotification
FirmwareStatusNotification
UpdateFirmware
Improved Security
CertificateSigned
ExtendedTriggerMessage
GetInstalledCertificateIds	Only CentralSystemRootCertificate type is supported
GetLog
InstallCertificate	Only CentralSystemRootCertificate type is supported
LogStatusNotification
SecurityEventNotification	Only ReconfigurationOfSecurityParameters, SettingSystemTime, SecurityLogWasCleared, StartupOfTheDevice, ResetOrReboot, FirmwareUpdated notifications are used
SignCertificate

Supported Configuration Key Names & Values
Key		Values
Key		Default	Supported range
Core
AllowOfflineTxForUnknownId		0	0, 1
AuthorizeRemoteTxRequests		1	0, 1
AuthorizationCacheEnabled		1	0, 1
ClockAlignedDataInterval		3600	300-86400
ConnectionTimeOut		120	1-3600
ConnectorPhaseRotation		Unknown	Unknown,RST,RTS,SRT, STR,TRS,TSR
GetConfigurationMaxKeys		60	-
HeartbeatInterval		3600	60-86400
LocalAuthorizeOffline		0	0, 1
LocalPreAuthorize		1	0, 1
MeterValuesAlignedData		""	Energy.Active.Import.Register,Current.Import,Current.Offered, Temperature,Voltage,Power.Active.Import
MeterValuesSampledData		Energy.Active.Import.Register	Energy.Active.Import.Register,Current.Import,Current.Offered, Temperature,Voltage,Power.Active.Import
MeterValueSampleInterval		3600	5-84600
NumberOfConnectors		1	-
ResetRetries		10	0-10
StopTransactionOnEVSideDisconnect		1	-
StopTransactionOnInvalidId		0	0, 1
StopTxnAlignedData		""	""
StopTxnSampledData		""	Energy.Active.Import.Register,Current.Import,Current.Offered, Temperature,Voltage,Power.Active.Import
TransactionMessageAttempts	3		1-100
TransactionMessageRetryInterval	20		5-60
UnlockConnectorOnEVSideDisconnect	1		0, 1
WebSocketPingInterval	10		1-1200
Local Auth List Management
LocalAuthListEnabled	1		0, 1
LocalAuthListMaxLength	50		-
SendLocalListMaxLength	10		-
Smart Charging
ChargeProfileMaxStackLevel	5		-
ChargingScheduleAllowedChargingRateUnit	"Current"		-
ChargingScheduleMaxPeriods	5		-
MaxChargingProfilesInstalled	9		-
Firmware Management
SupportedFileTransferProtocols	"HTTP,HTTPS,FTP"		-
Improved Security
SecurityProfile	0		0-3
CpoName	""		0-128 symbols
AdditionalRootCertificateCheck	0		0
CertificateStoreMaxLength	1		1
AuthorizationKey	""		32-40 symbols

If you have more questions about OCPP please visit our FAQ section: https://wiki.teltonika-energy.com/view/FAQ