Difference between revisions of "LED indicators"
From Wiki
m |
m |
||
| Line 34: | Line 34: | ||
|Green LED‘s on – TeltoCharge finished charging, EV is fully charged | |Green LED‘s on – TeltoCharge finished charging, EV is fully charged | ||
|Purple LED‘s on – TeltoCharge requires ventilation (charging is done in state D). | |Purple LED‘s on – TeltoCharge requires ventilation (charging is done in state D). | ||
| + | |- | ||
| + | | | ||
| + | | | ||
| + | |Open installer menu via Teltonika Energy app, set and save settings. | ||
| + | |Open installer menu via Teltonika Energy app and select to allow simplified charging sequence | ||
| + | | | ||
| + | |Authorize yourself with app or NFC card. | ||
| + | | | ||
| + | | | ||
| + | | | ||
| + | |Open installer menu via Teltonika Energy app and select that charging location is ventilated. To select that charger must be installed in ventilated location. | ||
|} | |} | ||
===RED LED indicators (errors)=== | ===RED LED indicators (errors)=== | ||
| − | + | {| class="wikitable" | |
| − | {| class="wikitable | + | |+ |
| − | |A | + | !A |
| + | !B | ||
| + | !C | ||
| + | !D | ||
| + | !E | ||
| + | !F | ||
| + | !G | ||
|- | |- | ||
| − | | | + | |[[File:TeltoCharge LEDS InputVoltageError.png|center|frameless]] |
| + | |[[File:TeltoCharge LEDS OutputVoltageCurrentError.png|center|frameless]] | ||
| + | |[[File:TeltoCharge LEDS CurrentLeakageDetected.png|center|frameless]] | ||
| + | |[[File:TeltoCharge LEDS ConnectivityError.png|center|frameless]] | ||
| + | |[[File:TeltoCharge LEDS TemperatureError.png|center|frameless]] | ||
| + | |[[File:TeltoCharge LEDS OtherErrors.png|center|frameless]] | ||
| + | |[[File:TeltoCharge LEDS FaultyConnection.png|center|frameless]] | ||
|- | |- | ||
| − | | | + | |Input voltage error |
| + | |Output voltage/current error | ||
| + | |Current leakage detected | ||
| + | |Connectivity error | ||
| + | |Temperature error | ||
| + | |Other errors | ||
| + | |Faulty connection to EV | ||
|- | |- | ||
| − | | | + | |Overvoltage; |
| − | | | + | Undervoltage; |
| − | + | ||
| − | |- | + | Wrong wiring; |
| − | | | + | |Overvoltage; |
| + | Undervoltage; | ||
| + | |||
| + | Current is higher than indicated; | ||
| + | |Current leakage detected | ||
| + | |Cable lock; | ||
| + | PP; | ||
| + | |||
| + | Car diode; | ||
| + | |Temperature reached 80°C | ||
| + | | -12V; | ||
| + | Humidity is too high; | ||
| + | |||
| + | Humidity communication error; | ||
| + | |CP fail | ||
|} | |} | ||
| − | |||
[[Category: Installation]] | [[Category: Installation]] | ||
Revision as of 08:38, 8 June 2022
| A | B | C | D | E | F | G | H | I | J |
|---|---|---|---|---|---|---|---|---|---|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| White LED‘s rolling from the bottom to the top – shows that TeltoCharge is booting up | White pulsing LED‘s – shows that TeltoCharge is in standby mode and waiting for action | Yellow pulsing LED‘s – shows that TeltoCharge is in standby mode with default settings. | Yellow LED‘s on – TeltoCharge is not charging, simplified charging sequence is required. | Blue LED‘s lights up from the middle – TeltoCharge do not require permission, it is waiting for EV to initiate charging process (go to state C). | Blue LED‘s pulsing – permission to charge is not granted. TeltoCharge requires authorization. | Green LED‘s pulsing - Initialisation of charging. | Green LED‘s rolling upwards from the bottom – TeltoCharge is in charging process. | Green LED‘s on – TeltoCharge finished charging, EV is fully charged | Purple LED‘s on – TeltoCharge requires ventilation (charging is done in state D). |
| Open installer menu via Teltonika Energy app, set and save settings. | Open installer menu via Teltonika Energy app and select to allow simplified charging sequence | Authorize yourself with app or NFC card. | Open installer menu via Teltonika Energy app and select that charging location is ventilated. To select that charger must be installed in ventilated location. |
RED LED indicators (errors)
| A | B | C | D | E | F | G |
|---|---|---|---|---|---|---|
 |
 |
 |
 |
 |
 |
|
| Input voltage error | Output voltage/current error | Current leakage detected | Connectivity error | Temperature error | Other errors | Faulty connection to EV |
| Overvoltage;
Undervoltage; Wrong wiring; |
Overvoltage;
Undervoltage; Current is higher than indicated; |
Current leakage detected | Cable lock;
PP; Car diode; |
Temperature reached 80°C | -12V;
Humidity is too high; Humidity communication error; |
CP fail |
