Difference between revisions of "LED indicators"
From Wiki
m |
|||
| Line 1: | Line 1: | ||
| + | {| class="wikitable" | ||
| + | |- | ||
| + | !A | ||
| + | |[[File:TeltoCharge LEDS booting up.gif|center|frameless]] | ||
| + | |White LED‘s rolling from the bottom to the top – shows that TeltoCharge is booting up | ||
| + | |- | ||
| + | !B | ||
| + | |[[File:TeltoCharge LEDS Standby White.gif|center|frameless]] | ||
| + | |White pulsing LED‘s – shows that TeltoCharge is in standby mode and waiting for action | ||
| + | |- | ||
| + | !C | ||
| + | |[[File:TeltoCharge LEDS Standby Yellow.gif|center|frameless]] | ||
| + | |Yellow pulsing LED‘s – shows that TeltoCharge is in standby mode with default settings. | ||
| + | |- | ||
| + | !D | ||
| + | |[[File:TeltoCharge LEDS SimplifiedCharging.png|center|frameless]] | ||
| + | |Yellow LED‘s on – TeltoCharge is not charging, simplified charging sequence is required. | ||
| + | |- | ||
| + | !E | ||
| + | |[[File:TeltoCharge LEDS WaitingforEV.gif|center|frameless]] | ||
| + | |Blue LED‘s lights up from the middle – TeltoCharge do not require permission, it is waiting for EV to initiate charging process (go to state C). | ||
| + | |- | ||
| + | !F | ||
| + | |[[File:TeltoCharge LED WaitingforAuthorization.gif|center|frameless]] | ||
| + | |Blue LED‘s pulsing – permission to charge is not granted. TeltoCharge requires authorization. | ||
| + | |- | ||
| + | !G | ||
| + | |[[File:TeltoCharge LEDS InitialisationOfCharging.gif|center|frameless]] | ||
| + | |Green LED‘s pulsing - Initialisation of charging. | ||
| + | |- | ||
| + | ! H | ||
| + | |[[File:TeltoCharge LEDS Charging.gif|center|frameless]] | ||
| + | |Green LED‘s rolling upwards from the bottom – TeltoCharge is in charging process. | ||
| + | |- | ||
| + | !I | ||
| + | |||
| + | |[[File:TeltoCharge LED ChargingFinished.png|center|frameless]] | ||
| + | |||
| + | |Green LED‘s on – TeltoCharge finished charging, EV is fully charged | ||
| + | |- | ||
| + | !J | ||
| + | |[[File:TeltoCharge LEDS RequireVentilation.png|center|frameless]] | ||
| + | |Purple LED‘s on – TeltoCharge requires ventilation (charging is done in state D). | ||
| + | |} | ||
| + | |||
| + | |||
{| class="wikitable" | {| class="wikitable" | ||
|+ | |+ | ||
| Line 7: | Line 53: | ||
!E | !E | ||
!F | !F | ||
| − | ! | + | !G |
| − | ! | + | !H |
| − | ! | + | !I |
| + | !J | ||
|- | |- | ||
|[[File:TeltoCharge LEDS booting up.gif|center|frameless]] | |[[File:TeltoCharge LEDS booting up.gif|center|frameless]] | ||
| Line 17: | Line 64: | ||
|[[File:TeltoCharge LEDS WaitingforEV.gif|center|frameless]] | |[[File:TeltoCharge LEDS WaitingforEV.gif|center|frameless]] | ||
|[[File:TeltoCharge LED WaitingforAuthorization.gif|center|frameless]] | |[[File:TeltoCharge LED WaitingforAuthorization.gif|center|frameless]] | ||
| + | |[[File:TeltoCharge LEDS InitialisationOfCharging.gif|center|frameless]] | ||
|[[File:TeltoCharge LEDS Charging.gif|center|frameless]] | |[[File:TeltoCharge LEDS Charging.gif|center|frameless]] | ||
| − | | | + | |[[File:TeltoCharge LED ChargingFinished.png|center|frameless]] |
| − | | | + | |[[File:TeltoCharge LEDS RequireVentilation.png|center|frameless]] |
|- | |- | ||
| − | |White LED‘s rolling | + | |White LED‘s rolling from the bottom to the top – shows that TeltoCharge is booting up |
| − | + | |White pulsing LED‘s – shows that TeltoCharge is in standby mode and waiting for action | |
| − | from the bottom to the | + | |Yellow pulsing LED‘s – shows that TeltoCharge is in standby mode with default settings. |
| − | + | |Yellow LED‘s on – TeltoCharge is not charging, simplified charging sequence is required. | |
| − | top – shows that | + | |Blue LED‘s lights up from the middle – TeltoCharge do not require permission, it is waiting for EV to initiate charging process (go to state C). |
| − | + | |Blue LED‘s pulsing – permission to charge is not granted. TeltoCharge requires authorization. | |
| − | TeltoCharge is booting up | + | |Green LED‘s pulsing - Initialisation of charging. |
| − | |White pulsing LED‘s – | ||
| − | shows that TeltoCharge | ||
| − | |||
| − | is in standby mode and | ||
| − | |||
| − | waiting for action | ||
| − | |Yellow pulsing LED‘s – | ||
| − | shows that TeltoCharge | ||
| − | |||
| − | is in standby mode with | ||
| − | |||
| − | default settings. | ||
| − | |Yellow LED‘s on – | ||
| − | TeltoCharge is not | ||
| − | |||
| − | charging, simplified | ||
| − | |||
| − | charging sequence | ||
| − | |||
| − | is required. | ||
| − | |Blue LED‘s lights up | ||
| − | from the middle – | ||
| − | |||
| − | TeltoCharge do not | ||
| − | |||
| − | require permission, | ||
| − | |||
| − | it is waiting for EV to | ||
| − | |||
| − | initiate charging process | ||
| − | |||
| − | (go to state C). | ||
| − | |Blue LED‘s pulsing – | ||
| − | permission to charge | ||
| − | |||
| − | is not granted. | ||
| − | |||
| − | TeltoCharge | ||
| − | |||
| − | requires authorization. | ||
|Green LED‘s rolling upwards from the bottom – TeltoCharge is in charging process. | |Green LED‘s rolling upwards from the bottom – TeltoCharge is in charging process. | ||
| − | | | + | |Green LED‘s on – TeltoCharge finished charging, EV is fully charged |
| − | | | + | |Purple LED‘s on – TeltoCharge requires ventilation (charging is done in state D). |
|} | |} | ||
Revision as of 08:04, 8 June 2022
| A |  |
White LED‘s rolling from the bottom to the top – shows that TeltoCharge is booting up |
|---|---|---|
| B |  |
White pulsing LED‘s – shows that TeltoCharge is in standby mode and waiting for action |
| C |  |
Yellow pulsing LED‘s – shows that TeltoCharge is in standby mode with default settings. |
| D |  |
Yellow LED‘s on – TeltoCharge is not charging, simplified charging sequence is required. |
| E |  |
Blue LED‘s lights up from the middle – TeltoCharge do not require permission, it is waiting for EV to initiate charging process (go to state C). |
| F |  |
Blue LED‘s pulsing – permission to charge is not granted. TeltoCharge requires authorization. |
| G |  |
Green LED‘s pulsing - Initialisation of charging. |
| H |  |
Green LED‘s rolling upwards from the bottom – TeltoCharge is in charging process. |
| I |  |
Green LED‘s on – TeltoCharge finished charging, EV is fully charged |
| J |  |
Purple LED‘s on – TeltoCharge requires ventilation (charging is done in state D). |
| A | B | C | D | E | F | G | H | I | J |
|---|---|---|---|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
| White LED‘s rolling from the bottom to the top – shows that TeltoCharge is booting up | White pulsing LED‘s – shows that TeltoCharge is in standby mode and waiting for action | Yellow pulsing LED‘s – shows that TeltoCharge is in standby mode with default settings. | Yellow LED‘s on – TeltoCharge is not charging, simplified charging sequence is required. | Blue LED‘s lights up from the middle – TeltoCharge do not require permission, it is waiting for EV to initiate charging process (go to state C). | Blue LED‘s pulsing – permission to charge is not granted. TeltoCharge requires authorization. | Green LED‘s pulsing - Initialisation of charging. | Green LED‘s rolling upwards from the bottom – TeltoCharge is in charging process. | Green LED‘s on – TeltoCharge finished charging, EV is fully charged | Purple LED‘s on – TeltoCharge requires ventilation (charging is done in state D). |
RED LED indicators (errors)
| A | Input voltage Error |
| B | Output voltage or current error |
| C | Curent leakage detected |
| D | Connectivity Error |
| E | Temperature Error |
| F | Other Errors (not listed) |
