149
edits
Changes
→Our Serial Port located here:
[[File:Energy meter adress.png|left|frameless]]
[[File:Energy meter adress.png|left|frameless]]
===6) As a user planning an installation with a MID (Measuring Instruments Directive) meter for consumption and billing, how do I install and configure a MID Meter with my Telto Charge?===
===6) As a user planning an installation with a MID (Measuring Instruments Directive) meter for consumption and billing, how do I install and configure a MID Meter with my Telto Charge?===
A “MID meter” is a smart meter device that allows you to record the energy consumption of a charging installation or a specific charger in conformity with the Measuring Instruments Directive (MID). Activate the 'Use data from energy meter' setting to enable the system to use data from the external energy meter for power consumption calculations.
A “MID meter” is a smart meter device that allows you to record the energy consumption of a charging installation or a specific charger in conformity with the Measuring Instruments Directive (MID).
Activate the 'Use data from energy meter' setting to enable the system to use data from the external energy meter for power consumption calculations.
*Ensure that when this function is activated, the dynamic load management function is turned off, as both functions cannot operate simultaneously.
*If you are using the meter for power consumption calculation, enter the kWh meter address in the designated section
'''Configuring the MID meter through the Teltonika Energy App'''
'''Configuring the MID meter through the Teltonika Energy App'''
[[File:MID METER.png|thumb|alt=|left]]
[[File:MID METER.png|thumb|alt=|left]]
''📝 Be aware, that every meter shall have unique address in order to keep fluent communication.''
''📝 Be aware, that every meter shall have unique address in order to keep fluent communication.''
===8) As a user , Can I use a non-bi-directional meter for Dynamic Load Balancing (DLB)?===
=== 8) As a user , Can I use a non-bi-directional meter for Dynamic Load Balancing (DLB)?===
Yes, a non-bi-directional meter is often sufficient for DLB systems, as they primarily manage and monitor the energy consumption from the grid to the consumer without the need for recording energy generation.
Yes, a non-bi-directional meter is often sufficient for DLB systems, as they primarily manage and monitor the energy consumption from the grid to the consumer without the need for recording energy generation.
===9-) What type of meter is required for a solar power system with DLB?===
===9-) What type of meter is required for a solar power system with DLB?===
A solar power system with Dynamic Load Balancing (DLB) requires a bi-directional meter to accurately measure both the consumption of grid energy and the generation of solar energy.
A solar power system with Dynamic Load Balancing (DLB) requires a bi-directional meter to accurately measure both the consumption of grid energy and the generation of solar energy.
