Difference between revisions of "OCPP 1.6 JSON guide"
(Created page with "= Integrating My TeltoCharge with OCPP 1.6 JSON = This guide explains how to integrate My EV Charging Station with your existing system using the OCPP 1.6 JSON protocol. ==...") |
|||
| Line 1: | Line 1: | ||
| − | = Integrating | + | = Integrating TeltoCharge with OCPP 1.6 JSON = |
| − | This guide explains how to integrate | + | This guide explains how to integrate '''TeltoCharge''' with your existing system using the OCPP 1.6 JSON protocol. |
| − | == | + | == Getting started == |
Before you begin, you will need the following: | Before you begin, you will need the following: | ||
| Line 25: | Line 25: | ||
4. Test the connection by starting a charging session from your OCPP 1.6 JSON server. | 4. Test the connection by starting a charging session from your OCPP 1.6 JSON server. | ||
| − | 5. Monitor the charging station from your OCPP 1.6 JSON server. You will be able to view the charging status, energy usage, and other important information about the charging station (for configuration keys available at the moment from TeltoCharge please communicate with your Sales manager or directly through Teltonika Energy VIP HELPDESK). | + | 5. Monitor the charging station from your OCPP 1.6 JSON server. You will be able to view the charging status, energy usage, and other important information about the charging station '''(for configuration keys available at the moment from TeltoCharge please communicate with your Sales manager or directly through Teltonika Energy VIP HELPDESK)'''. |
== Troubleshooting == | == Troubleshooting == | ||
| Line 33: | Line 33: | ||
== Conclusion == | == Conclusion == | ||
| − | By following these steps, you can successfully integrate | + | By following these steps, you can successfully integrate TeltoCharge with your existing system using the OCPP 1.6 JSON protocol. |
Revision as of 22:54, 26 March 2023
Main Page > TeltoCharge > Advanced Topics > OCPP 1.6 JSON guideIntegrating TeltoCharge with OCPP 1.6 JSON
This guide explains how to integrate TeltoCharge with your existing system using the OCPP 1.6 JSON protocol.
Getting started
Before you begin, you will need the following:
- TeltoCharge is installed and configured.
- TeltoCharge has access to the internet.
- Knowledge of the OCPP 1.6 JSON protocol
Steps
1. Configure the charging station to connect to your OCPP 1.6 JSON server. You will need to know the IP address or domain name of your server and the port number for the OCPP 1.6 JSON protocol.
2. Set up a charging station account on your OCPP 1.6 JSON server. You will need to provide the following information:
* Charging station ID: This is a unique identifier for your charging station. * Charging station type: Specify the type of charging station you have. (AC) * Other settings as required by your OCPP 1.6 JSON server.
3. Connect the charging station to your OCPP 1.6 JSON server. The charging station will communicate with your server using the OCPP 1.6 JSON protocol.
4. Test the connection by starting a charging session from your OCPP 1.6 JSON server.
5. Monitor the charging station from your OCPP 1.6 JSON server. You will be able to view the charging status, energy usage, and other important information about the charging station (for configuration keys available at the moment from TeltoCharge please communicate with your Sales manager or directly through Teltonika Energy VIP HELPDESK).
Troubleshooting
If you encounter any issues during the integration process, refer to the troubleshooting section of your OCPP 1.6 JSON server documentation or contact Teltonika Energy technical support via your Sales manager or Teltonika Energy VIP HELPDESK.
Conclusion
By following these steps, you can successfully integrate TeltoCharge with your existing system using the OCPP 1.6 JSON protocol.
