View source for Acrel settings

<div style="font-family:'Inter','Helvetica Neue',Arial,sans-serif; line-height:1.6;">

== <span style="font-family:'Oswald','Arial Narrow',sans-serif; text-transform:uppercase; letter-spacing:0.02em;">RS-485 parameters for Acrel DTSD 1352</span> ==

''Note: The energy meter's parameters must match the EVSE (charger) parameters. The default values are listed below.''

{| class="wikitable" style="text-align:center; width:80%;"
! style="background:#001A77; color:#FFFFFF; border-color:#001A77; font-family:'Oswald','Arial Narrow',sans-serif; text-transform:uppercase; letter-spacing:0.03em; font-weight:500; padding:8px;" | RS-485 parameter
! style="background:#001A77; color:#FFFFFF; border-color:#001A77; font-family:'Oswald','Arial Narrow',sans-serif; text-transform:uppercase; letter-spacing:0.03em; font-weight:500; padding:8px;" | EVSE (charger) default value (configurable in the app)
|-
| Modbus address || 1
|-
| Baud rate || 9600
|-
| Parity || None
|-
| Stop bits || 1
|}

== <span style="font-family:'Oswald','Arial Narrow',sans-serif; text-transform:uppercase; letter-spacing:0.02em;">Configuring the meter in the mobile application</span> ==

''Note: You can use two meters with different addresses. Both meters share the same settings in the installer menu.''

# Make sure your charger firmware and application are updated to the latest version (see [[Release notes: Firmware]] and the app for [https://apps.apple.com/lt/app/teltonika-energy/id1618750750 iOS] / [https://play.google.com/store/apps/details?id=com.teltonika.ems.ev&hl=en&gl=US Android]).
# Enter the Installer menu, select Load Balancing, then Modbus RTU.<br>[[File:Settings-to-rtu.png|frameless|alt=Path to Modbus RTU settings|576x576px]]
# If the charger does not recognise the meter, go to Manual Setup and choose your meter model from the presets, or enter the values from the RS-485 parameters table manually.<br>[[File:Mod-to-manual.png|frameless|alt=Manual setup screen|576x576px]]

Once the meter is successfully configured, press Connect. You will receive a confirmation screen and the status will change. Possible statuses:
* '''Connected''' – the meter is configured correctly.
* '''Disconnected''' – a wrong parameter value is set on the charger, or the meter is not wired correctly.
* '''Wrong type''' – the meter configuration does not match the connected meter.
* '''Not supported''' – the connected meter is not compatible with the installation.

For detailed settings, refer to the energy meter's official documentation.

</div>

[[Category:Smart energy meter mastersheet]]