Teltonika Energy Wiki - User contributions [en]

EVC2 firmware

2026-05-19T08:12:16Z

Vaidotas Seliukas: /* Changelog */ Added - Latest Firmware and Previous Firmware paragraph names

==Latest Firmware==
===<b><span class="plainlinks">[https://wiki.teltonika-energy.com/images/4/47/TeltoCharge-v2.2.6.bin EVC2xx V2.2.6]</span></b> | 2026.05.01===
* <b>New features and settings</b>
** Added new solar charging modes for Dynamic Load Management, including Solar Only, ECO, and Hybrid modes.
** Added new Dynamic Load Management capabilities, including [https://wiki.teltonika-energy.com/view/Potential_free_contact potential-free contact support], dynamic IP device discovery and reconnection, and configurable 1-phase charging behavior.
** Expanded Modbus meter support with additional [https://wiki.teltonika-energy.com/view/SDM%20models Eastron] and [https://wiki.teltonika-energy.com/view/A%20and%20B%20models ABB] meter models.
** Added installer setting for IT grid voltage sampling.
** Added an NFC reader cooldown to prevent accidental repeated actions.
* <b>Bug fixes and improvements</b>
** Improved charging session recovery, troubleshooting logs, and reboot reporting after power loss events.
** Improved solar charging and Dynamic Load Management stability, including power limit handling, Modbus TCP communication, ECO mode synchronization, and DLM failsafe behavior.
** Improved communication stability for Bluetooth, LAN, and WebSocket connections.
** Improved charging session energy graph accuracy and HomeWizard P1 meter data handling.
** Improved OCPP configuration request handling and tamper event reporting.
** Improved internal time synchronization.

== Previous Firmwares ==

===<b><span class="plainlinks">[https://wiki.teltonika-energy.com/images/3/35/TeltoCharge-v2.1.5.bin EVC2xx V2.1.5]</span></b> | 2026.01.06===
* <b>New features and settings</b>
** UK product code handling
* <b>Bug fixes and improvements</b>
** NFC scanning module improvements
** Fixed bugs where the settings were not being saved while switching power selector
** Improved OCPP handling when starting/stopping charge
** Various bug fixes related to parameter and information handling
===<b><span class="plainlinks">[https://wiki.teltonika-energy.com/images/e/e8/TeltoCharge-v2.1.0.bin EVC2xx V2.1.0]</span></b> | 2025.11.24===
* <b>New features and settings</b>
** Support for Shelly 3PRO meters added
*** more information: [[Dynamic Load Balancing EVC2#Modbus TCP/IP models|Shelly 3PRO configuration]]
** Modbus TCP device control enabled
** New settings: Max group load & Max grid load for DLM/DLB functions
** 2x RS-485 port support
*** more information: [[2x RS458 support]]
** EVC2XX potential-free contact support
*** more information: [[Potential free contact]]
** Power rotary switch implementation for easier setup
*** more information: [[Power Selector Switch]]
** Automatic grid type detection and phase rotation support
** LAN-based device control via EV charging app, previously it was possible through Bluetooth only
** Automatic firmware updates support
** Changed installer menu code to 4 digits
* <b>Bug fixes and improvements</b>
** Various metering and charging bug fixes
** Various Modbus and OCPP communication protocol enhancements
** Charger stability issues resolved
** Bluetooth, NFC and UI features improved
----

== Updating ==
Use our app to update the station manually

# Use app and go to settings, scroll down and press '''Device info''';
# Press '''Check for updates''';
# At the top, current firmware version can be found.
# User has 2 options: to update from our cloud or by manually uploading a firmware file to the charger.

[[File:How to update.png|frameless|984x984px]]

Main Page EVC2

2026-01-30T10:36:28Z

Vaidotas Seliukas:

=General information=
<br>
<div style="background-color: #f2f2f2; padding: 20px;">
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[General information]]</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
<ul>
<li>[[General Specifications EVC2|General Specifications]]</li>
<li>[[EVC_2_Datasheets|Datasheet]]</li>
<li>[[Electrical Specifications EVC2|Electrical Specifications]]</li>
<li>[[Warranty/EVC2|Warranty]]</li>
<li>[[Compliance documentation EVC2|Compliance documentation]]
</ul>

<div style="background-color: #f2f2f2; padding: 0px;">
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[Getting Started]]</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">

<ul style="list-style-type: disc; margin-left: 20px; padding: 0;">
<li>[[First Start Guide EVC2|First Start Guide]]</li>
<li>[[Physical installation process EVC2|Physical installation process]]</li>
<li>[[Media:EVC200 Installation manual V.10.200.pdf|Installation Manual]]</li>
<li>[[Quick user guide of mobile application EVC2|Quick user guide of mobile application]]</li>
</ul>

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 0px; text-align: center;">[[Product guides]]</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
<ul>
<li>[[EVC2 charger|Product Guide of EVC2]]</li>
<li>[[Functionalities EVC2|Functionalities]]</li>
<li>[[Troubleshooting Guide EVC2|Troubleshooting Guide]]</li>
<li>[[TeltoCharge product codes EVC2|Product numbers - what to order?]]</li>
</ul>

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 0px; text-align: center;">[[Accessories]]</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
<ul>
<li>[[EVC2 P1 dongle|P1 dongle]]</li>
<li>[[EVC2 Modbus TCP meters|Modbus TCP meters]]</li>
<li>[[EVC2 Modbus RTU meters|Modbus RTU meters]]</li>
<li>[[EVC2 CT clamps|CT clamps]]</li>
<li>[[EVC2 single/double poles|Single and double mounting poles]]</li>
<li>[[EVC2 quadruple mounting poles|Quadruple mounting pole]]</li>
<li>[[EVC2 cable holder|Cable holder]]</li>
<li>[[EVC2 nfc card pack|NFC card pack]]</li>
<li>[[EVC2 RCBO|RCBO device]]</li>
<li>[[EVC2 frontplates|Frontplates]]</li>
</ul>

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[Advanced Topics]]</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
<ul style="list-style-type: none; margin: 0; padding: 0;">
<ul>
<li>[[Potential free contact|'''NEW:''' Potential free contact]]</li>
<li>[[Power Selector Switch|'''NEW:''' Power Selector Switch]]</li>
<li>[[Restart button|'''NEW:''' Button functionality]]</li>
<li>[[2x RS458 support|'''NEW:'''2x:RS485 ports for DLM & MID]]</li>
<li>[[Dynamic Load Balancing EVC2|Dynamic Load Balancing]]</li>
→[[Dynamic Load Balancing EVC2#SMART METER AND TELTOCHARGE COMMUNICATION|DLB with Smart meters]]<br>
→ →[[Dynamic Load Balancing EVC2#MODBUS RTU METERS|Modbus RTU meters]]<br>
→ →[[Dynamic Load Balancing EVC2#Supported_Modbus_RTU_models|Supported Smart Energy meters]]<br>
→ →[[Dynamic Load Balancing EVC2#MODBUS TCP/IP METERS|Modbus TCP/IP meters]]<br>
→ →[[Dynamic Load Balancing EVC2#Supported_Modbus_TCP/IP_models|Supported TCP/IP smart energy meters]]<br>
→[[Dynamic Load Balancing EVC2#CT CLAMPS|DLB with CT clamps]]<br>
→[[Dynamic Load Balancing EVC2#EXTERNAL CONTROL|DLB with External control]]<br>
→[[Dynamic Load Balancing EVC2#SMARTSTUFF P1 CONVERTER|DLB with P1 Smartstuff converter]]<br>
→[[Dynamic Load Balancing EVC2#TELTONIKA ENERGY APP SETTINGS|DLB configuration]]<br>
<li>[[Solar integration EVC2|Solar integration]]</li>
<li>[[Dynamic Load Management EVC2|Dynamic Load Management]]</li>
→[[Dynamic Load Management EVC2#DLM VIA MODBUS RTU|DLM via modbus RTU]]<br>
→[[Dynamic Load Management EVC2#DLM VIA MODBUS TCP/IP|DLM via modbus TCP/IP]]<br>
→[[Dynamic Load Management EVC2#TELTONIKA ENERGY APP SETTINGS|DLM configuration]]<br>
<li>[[OCPP 1.6 JSON guide EVC2|Connecting Teltonika EVC stations via OCPP 1.6 JSON Guide]]</li>
→ [[OCPP 1.6 JSON guide EVC2#COMPATIBLE SOFTWARE PROVIDERS FOR OCPP INTEGRATION|Compatible Software Providers for OCPP Integration]]<br>
<li>[[In app diagnostics|In app diagnostics]]</li>

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[Resources]]</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
<li>[[EVC2 firmware|Firmware]]</li>
<li>[[FAQEVC2|FAQ]]</li>
<li>[[UseCases2|Use cases]]</li>
<li>[[SupportEVC2|Support forum]]</li>
<li>[[Preventive Maintenance|Preventive Maintenance]]</li>

</ul>
</ul>
</big>

[[Category: Main Page]]

File:EVC200 Installation manual V.10.200.pdf

2025-09-16T06:56:18Z

Vaidotas Seliukas: Vaidotas Seliukas uploaded a new version of File:EVC200 Installation manual V.10.200.pdf

== Summary ==
EVC2 Installation manual

File:EVC200 Installation manual V.10.200.pdf

2025-08-21T10:47:40Z

Vaidotas Seliukas: Vaidotas Seliukas uploaded a new version of File:EVC200 Installation manual V.10.200.pdf

== Summary ==
EVC2 Installation manual

Firmware

2025-07-18T09:50:21Z

Vaidotas Seliukas:

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;">Latest firmware version download</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
Here you can find all information about '''firmware''' of TeltoCharge.
<br>
*1.6 version let you update your charger FW with only one file. You don't need to bother if it's legacy or secure FW installed in your charger:

{| class="wikitable" style="text-align: center; border: 1px solid #dddddd; font-family: arial, sans-serif; width: 60%;"
|+
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Latest FW version
| colspan="2" | '''[https://wiki.teltonika-energy.com/images/9/99/TeltoCharge-v1.14.7-bundle.zip TeltoCharge-v1.14.7]'''

|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Release date:
|'''May 19, 2025'''

|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Whats new?
|'''[https://wiki.teltonika-energy.com/images/4/40/Release_note_FW_1.14.pdf Release note]'''
|-
|}
*Here you can see all the previous firmware versions:
{| class="wikitable" style="text-align: center; border: 1px solid #dddddd; font-family: arial, sans-serif; width: 60%;"
|+
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Previous FW versions
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Legacy firmware version*
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Firmware version
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Release date
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Whats new?
|-
|1.13.9
| colspan="2" | '''[https://wiki.teltonika-energy.com/images/a/ae/TeltoCharge-v1.13.9-bundle.zip TeltoCharge-v1.13.9]'''
|September 10, 2024
|[https://wiki.teltonika-energy.com/images/5/50/Release_note_FW_1.13.pdf Release note]
|-
|1.12.8
| colspan="2" | '''[https://wiki.teltonika-energy.com/images/7/77/TeltoCharge-v1.12.8-bundle.zip TeltoCharge-v1.12.8]'''
|August 05, 2024
|[https://wiki.teltonika-energy.com/images/9/91/Release_note_FW_1.12.pdf Release note]
|-
|1.11.6
| colspan="2" | '''[https://wiki.teltonika-energy.com/images/f/f1/TeltoCharge-v1.11.6-bundle.zip TeltoCharge-v1.11.6]'''
|February 01, 2024
|[https://wiki.teltonika-energy.com/images/1/13/Release_note_FW_1.11.6.pdf Release note]
|-
|1.10.9
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/2/2a/TeltoCharge-v1.10.9-bundle.zip TeltoCharge-v1.10.9]'''
|October 23, 2023
|'''Android 14 optimization'''
|-
|1.10.7
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/2/29/TeltoCharge-v1.10.7-bundle.zip TeltoCharge-v1.10.7]'''
|October 23, 2023
|[https://wiki.teltonika-energy.com/images/e/ed/Release_note_FW_1.10.7.pdf Release note]
|-
|1.9.6
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/7/7b/TeltoCharge-v1.9.6-bundle.zip TeltoCharge-v1.9.6]'''
|September 18, 2023
|[https://wiki.teltonika-energy.com/images/9/90/Release_note_FW_1.9.5.pdf Release note]
|-
|1.9.5
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/9/91/TeltoCharge-v1.9.5-bundle.zip TeltoCharge-v1.9.5]'''
|August 31, 2023
|[https://wiki.teltonika-energy.com/images/9/90/Release_note_FW_1.9.5.pdf Release note]
|-
|1.8
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/4/43/TeltoCharge-v1.8.11-bundle.zip TeltoCharge-v1.8.11]'''
|July 3, 2023
|[https://wiki.teltonika-energy.com/images/e/ea/Release_note_FW_1.8.10.pdf Release note]
|-
|1.7
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/a/ad/TeltoCharge-v1.7.9-bundle.zip TeltoCharge-v1.7]'''
|May 22, 2023
|[https://wiki.teltonika-energy.com/images/1/1f/Release_note_FW_1.7.9.pdf Release note]
|-
|1.6.0
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/b/ba/TeltoCharge-v1.6.7-bundle.zip TeltoCharge-v1.6]'''
|Mar 1, 2023
|[https://wiki.teltonika-energy.com/images/4/4d/FW_1.6.pdf Release note]
|-

|1.5
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/d/dd/TeltoCharge-v1.5.8-bundle.zip TeltoCharge-v1.5]'''
|Dec 22, 2022
|[https://wiki.teltonika-energy.com/images/3/3d/Release_note_v1.5.pdf Release note]
|-
|1.4
|'''TeltoCharge-v1.4.3L'''
|'''TeltoCharge-v1.4.2'''

|Oct 7, 2022
|[https://wiki.teltonika-energy.com/images/b/b6/Release_note_v1.4.3L.pdf Release note]
|-
|1.3
|'''TeltoCharge-v1.3.12L'''
|'''TeltoCharge-v1.3.12'''
|Sep 28, 2022
|[https://wiki.teltonika-energy.com/images/a/a9/Release_note_v1.3.11L.pdf Release note]
|-
|1.2
|colspan="2" |'''TeltoCharge-v1.2.10'''
|Aug 8, 2022
|[https://wiki.teltonika-energy.com/images/0/02/Release_note_v1.2.10.pdf Release note]
|-
|1.1
|colspan="2" |'''TeltoCharge-v1.1.12'''
|Jun 6, 2022
|[https://wiki.teltonika-energy.com/images/2/24/Release_note_v1.1.12.pdf Release note]
|-
|1.0
|colspan="2" |'''TeltoCharge-v1.0.7'''
|Apr 25, 2022
|
|-
|Other
|colspan="2" |'''TeltoCharge-v1.0.4'''
|Apr 22, 2022
|
|}
'''Legacy firmware version* -''' TeltoCharge fw version which was used for chargers before mass production (these chargers are using same hardware, it's only related to separation). These type of chargers can only be updated to legacy FW version. '''From 1.5 version it is fixed and you won't need to keep this in mind.

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;">How to check your firmware version?</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
<br>
1. Go to Teltonika Energy app settings, scroll down and press '''Device info'''; <br>

2. Press '''Check for updates'''; <br>

3. At the top, current firmware version can be found. <br>
<br>
[[File:TeltoCharge FirmwareVersionCheck1.png|frameless|588x588px]] [[File:TeltoCharge FirmwareVersionCheck.png|frameless|588x588px]]

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;">How to update firmware automatically?</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
The product utilizes FOTA update services (HTTP/HTTPS client).<br>

1. To update firmware, click on the main window bar '''Click to update''' option; <br>

2. You will be automatically transfered to '''Updates''' window . <br>

3. Choose to '''Update Firmware''' from firmware available on server. <br>

4. Do not close Teltonika Energy app and stay in bluetooth range while update ends. <br>
<br>

[[File:Fota 1.png|frameless|588x588px]] [[File:Fota 2.png|frameless|588x588px]]

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;">How to update firmware manually?</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
1. To update firmware manually, first of all, download firmware file from this page to your mobile phone which is paired with your TeltoCharge; <br>

2. Go to Teltonika Energy app settings, scroll down and press device info, then press Check for updates; <br>

3. Browse file and select latest firmware version which was downloaded; <br>

4. Press Upload firmware; <br>

5. Do not close Teltonika Energy app and stay in bluetooth range while update ends; <br>
<br>

[[File:Updates2.png|frameless|588x588px]] [[File:Updates3.png|frameless|588x588px]] [[File:Updates4.png|frameless|588x588px]]

[[Category: Resources]]

Functionalities

2025-07-17T08:34:15Z

Vaidotas Seliukas: /* WiFi */

=Cable lock=
There is a possibility to activate cable lock on demand even if the charging is not initiated.

* When Cable lock is ON, the locking pin pushes out and fixes charging cable in place.
* When Cable lock is set to AUTO, locking pin behaves accordingly to the charging state the product is in.
** A state - Cable is not locked;
** B/C/D states - Cable is locked;

''By default this status is set to AUTO''<br>
''Settings can only be found in socket variant products''

=Authorization=
There is possibility to turn ON/OFF authorization for TeltoCharge.

When authorization is ON, user have to authorize every time he wants to start charging process. Authorization can be done in two different ways:

*By swiping the Slider in main menu;
*By using NFC card;

''By default authorization status is set to OFF, user can set this status during the first set-up wizard.''

=NFC=
For personalized authorization, there is possibility to add and use NFC cards. Just press "Add new card", name your card and then touch the NFC card to the side of the charger. It should say "Card added successfully".

More information about NFC cards pairing can be found [[NFC FAQ|here]].

''By default, NFC cards whitelist is empty.''

=Load balancing=
Inside load balancing menu user can lower or increase current up to the value which was set by the installer in Installer menu. <br>
For example: you set 32 A in Installer menu option '''Max power from grid''', so in user menu option '''Load balancing''' you will be able to set limitation from 6 A to 32 A.

''By default load balancing is set to 10 A, user can increase this value when he increases Max power from grid option in Installer menu.''

= Schedule =
There is an option to configure individual charging times in order to plan electricity usage or the effectiveness of the electrical grid.<br>

* For the time periods when the car should not be charged, select the ‘Peak hours’ section.<br>
* For time periods when the car should be charged, select the ‘Schedule‘ section (click on the '''+''' icon in the upper right corner).<br>

To set charging schedules, choose the desired hours and minutes on the provided clock.<br>

The ‘Repeat schedule‘ function repeats every week on the selected days.
When the ‘Repeat schedule‘ function is disabled, the selected charging schedule will be set only for the week ahead and will stop after the last set day. In this case, the ‘Enable schedule charging‘ function will be automatically disabled. If the ‘Start time‘ is set in the past, the schedule will be active on the next selected day of the week. For example, if the current time is 10 AM on Friday, but the ‘Start time‘ is scheduled for 9 AM on Friday, it will only be active on the following Friday at 9 AM.<br>

The ‘Enable schedule charging‘ function will be disabled at midnight after the end of a schedule.
It is important to optimize the active schedules and ensure that they do not overlap. '''Charger will not allow to save active overlapping schedules.''' However, when schedules are disabled, it can be saved.<br>

If peak hours are set for one time and scheduled charging hours are set later on the same day, there is a contradiction between these two conditions, and the EV will not be charged during the period between them. For example, if peak hours are set from 2 PM to 3 PM and regular scheduled charging hours are set from 5 PM to 7 PM, the EV will be charged only from 5 PM to 7 PM.

= Randomized delay =
The randomized delay function provides an additional layer of protection against grid overloading. In the following cases, a random delay of up to 10 minutes will be applied:

* ''When a vehicle is connected and attempting to initiate the charging process for the first time.''
* ''At the beginning and end of each scheduled charging session.''
* ''After TeltoCharge has been restarted, rebooted, or turned off.''

Although this feature is enabled, it can be manually interrupted by swiping the App slider or using an NFC card.<br>

Using the Randomized delay function along with scheduled charging hours, the EV will only begin charging after waiting for the scheduled time and adding a randomized delay of up to 10 minutes. Similarly, a randomized delay will be applied to the scheduled end of charging.<br>

If the EV charging process is interrupted (e. g. temporary power outage), the randomized delay will still be in effect when the power is restored, further delaying the start of charging.<br>

When OCPP is turned on, the Randomized delay functionality will not be active.

= Errors and warnings =
If TeltoCharge is not working correctly and giving errors or warnings, you will now be able to see more information in the app. All errors and warnings will be sent to the app in real-time.
For all the details check: [https://wiki.teltonika-energy.com/view/LED_indicators LED indicators list]

= Live data =
Live data from TeltoCharge. It will be possible to see such data as:

* ''Charging type''
* ''Phase used''
* ''Temperature''
* ''Max allowed current''
* ''Phase voltages (input and output)''

= Connectivity=
In the connectivity tab user can connect TeltoCharge to internet via Wi-Fi, Ethernet cable or GSM card (if it is selected as product option).

In this section, it is also possible to connect charging station to internet server for remote management (OCPP).

==Wi-Fi==
Product supports 2.4 GHz Wi-Fi connectivity.
By default this feature is disabled.<br>

To connect Teltocharge to Wi-Fi, just follow these steps:

*''Open Wi-Fi tab;''
*''Enable it with the slider;''
*''Select your network from provided list;''
*''Insert password and press save;''
*''Wait until product is connected successfully;''

==Mobile ==
''Optional. About possible purchase ask your sales manager'' <br/>
To connect TeltoCharge to cellular data first of all nano SIM card have to be inserted to the SIM card port. After that just enable Mobile Internet in the Connectivity tab with the slider.

Mobile internet tab also has got some configurations which can be set by user:

*''PIN code''
*''APN adress''
*''Username''
*''Password''
*''Dialing number''

==OCPP==
Open Charge Point Protocol 1.6 is used to connect TeltoCharge to 3rd party Cloud servers. At the moment charger is able to achieve ''"Core"'', ''"Local auth list management"'' and ''"Smart charging"'' functions.

Before connecting TeltoCharge to any 3rd party Charge point management server, firstly check if server is compatible with OCPP 1.6 JSON.

If server provider supports this OCPP version, to connect, user needs to type in server URL address and Charge point identity. After all settings are set, enable OCPP with a slider and press Save at the bottom of the screen. User also can see status if charger was connected successfully or not.

More information about OCPP you can find [[OCPP FAQ|here]].

==Ethernet ==
To connect TeltoCharge with Ethernet just plug in the cable and all needed settings should be set automatically.

In order to be able to type configuration manually, user have to disable DHCP setting beforehand. DHCP slider can be found in the same Ethernet parameters window.

==Date & Time==
In this tab user can set date and time according to the region in which product is going to be used. '''It is recommended to synchronize''' time with phone (button for this action is provided).

=Device info=
In this tab user/installer can see all the HW information about charger, maximum current set by installer (inside installer menu) and real-time temperature.

Also there is a possibility to restore default settings. With this function TeltoCharge restore all settings to default values except from the Installer Menu ones.
<br>

After pressing '''Check for updates''', new window pops up, where user/installer can see information about current FW and update it.

==Diagnostics==

Here you can download troubleshoot file. <br>
It will be used only by the Customer support engineers while solving risen issues.

=Installer menu=
This is the menu for installer to reach configuration settings.

After every installation installer must open this menu and set required parameters.

To open installer menu, it is needed to insert ''Installer code''. You can find this code on the sticker, which is placed on the middle plate (under the front plate).

<u>*Installer menu is '''only''' for installers or personnel with relevant qualifications.*</u>

==Max power from grid==
This configuration shall be used in two different ways:

*If you <u>are</u> using Dynamic load balancing, use this value to set the maximum current per phase that can be supplied to the whole electrical installation. Usually this value is the rated current of the main circuit breaker.
* If you <u>are no</u>t using Dynamic load balancing, use this value to set maximum current, which charger can use. This value should be calculated according to the possible load, that other appliances can be using, by subtracting it from the maximal current which is provided to the grid. That said, in this situation, current should not be higher than 16 amperes (If 11 kW charger is installed) or 32 amperes ( if 7,4 or 22 kW chargers is installed).

'' By default this setting is set to 10 Amps''

== Supply voltage ==
*Installer can change supply voltage (''voltage between phase and neutral wires'')
*Different regions can have different supply voltages, so installer can set this value accordingly to the used voltage in the individual site;

''Global product: By default this setting is set to 230 V''<br>
''North American product: By default this setting is set to 120 V''

==Upper voltage tolerance==
There is a possibility to change the tolerance limit for upper voltage threshold. This can be used in the sites where voltage fluctuation is recurring.

''By default this setting is set to 10 %''

== Lower voltage tolerance==
There is possibility to change the tolerance limit for lower voltage threshold. This can be used in the sites where voltage fluctuation is big.

''By default this setting is set to 10 %''

==Three phase charging==
With this slider installer have an ability to turn off 3-phase charging (only if 3 phases are connected to the product).

''By default this setting is turned OFF''<br>
''Not available in North America products''

==Phase priority==
There is a possibility to select which phase should be prioritized for charging, if 3 phases are connected, but 3-phase charging is disconnected.

For example: if 3 chargers are connected to the same electrical network, it is possible to prioritize different phase for each charger to avoid cutting of the main power.

''By default this setting is set to L1''<br>
''Not available in North America products''

==Dynamic load balancing==
This function is used to turn on Dynamic load balancing. To access this feature it is recommended to read more [[Dynamic Load Balancing|here]]

''By Default this setting is turned off''<br>
''Not available in North America products''

== Energy meter type selection ==
Be able to choose energy meter type, which will be used for the load balancing. Meter type setting is available in the app and the setting has two options: 1 phase, 3 phase

== Use data from energy meter ==
Option to use data from external energy meter for power consumption calculations. New setting in the app for activating this function. Total values from energy meter also will be used in the OCPP. When this function is activated, dynamic load balancing function will not be active.

==Use preferred phase==
This function can be used if Dynamic load balancing is ON. With this feature installer can enable charger to use Preferred phase for charging process.

''By default this setting is turned off''
==Difference between phases==
This function let user to select how theirs power input is wired - in Star network or Delta network style. <br>
120° - Star (Wye) and Delta; <br>
180° - Delta and split phase.

In the case of Europe, most Star (Wye) and Delta connections will have a phase difference of 120°. In North America, the phase shift can be 180° when split phase connection type is used or in the case of Delta connection with center tap on one leg.

''Note: these parameters are used only for the power consumption (kWh) calculations and not influence operation of the charger.''

''Global product: By default this setting is marked as 120° ''<br>
''North American product: By default this setting is marked as 180°''

==Use neutral as phase==
This function allows user to use electrical network without Neutral wire. L1 then must be connected to N(L1) pin in input terminal.

''Global product: By default this setting is turned OFF''<br>

''North American product: By default this setting is turned ON''

==Allow simplified charging sequence==
There are electrical vehicles which do not use B state to start charging process and charging states goes directly from A to C. For that it requires simplified charging sequence enabled. If this option is turned OFF, TeltoCharge will not start charging with this type of EV connected.

''By default this setting is turned OFF''

==Charging location is ventilated==
There are electrical vehicles which requires ventilation (charging is done on state D), because they use lead batteries and it is of great importance to ventilate them.

If EV sends signal to go to state D, but charger is not installed outside and this parameter is set to „NO“- charging will not be started.

If TeltoCharge is installed outside, set this setting to ''YES.''

''By default this setting is set to NO''

==Temperature warning==
There is a possibility to increase temperature warning level. When charger reaches this temperature level, it starts to ventilate itself by decreasing charging power. If Charger reaches 80''°C'' it turns off relays and stops charging process.

''By default this setting is set to 60 °C''

==Factory default settings==
By using this setting installer can restore Factory default settings. This function restores all settings which were set in the Installer menu as well as in the Main menu.

After this reset yellow LEDs starts blinking which means that charger requires to set-up Installer menu again.

==Reboot device==
There is a possibility to reboot charger through the Teltonika Energy app.

[[Category: Product guides]]

Functionalities

2025-07-17T08:30:10Z

Vaidotas Seliukas: /* Schedule */

=Cable lock=
There is a possibility to activate cable lock on demand even if the charging is not initiated.

* When Cable lock is ON, the locking pin pushes out and fixes charging cable in place.
* When Cable lock is set to AUTO, locking pin behaves accordingly to the charging state the product is in.
** A state - Cable is not locked;
** B/C/D states - Cable is locked;

''By default this status is set to AUTO''<br>
''Settings can only be found in socket variant products''

=Authorization=
There is possibility to turn ON/OFF authorization for TeltoCharge.

When authorization is ON, user have to authorize every time he wants to start charging process. Authorization can be done in two different ways:

*By swiping the Slider in main menu;
*By using NFC card;

''By default authorization status is set to OFF, user can set this status during the first set-up wizard.''

=NFC=
For personalized authorization, there is possibility to add and use NFC cards. Just press "Add new card", name your card and then touch the NFC card to the side of the charger. It should say "Card added successfully".

More information about NFC cards pairing can be found [[NFC FAQ|here]].

''By default, NFC cards whitelist is empty.''

=Load balancing=
Inside load balancing menu user can lower or increase current up to the value which was set by the installer in Installer menu. <br>
For example: you set 32 A in Installer menu option '''Max power from grid''', so in user menu option '''Load balancing''' you will be able to set limitation from 6 A to 32 A.

''By default load balancing is set to 10 A, user can increase this value when he increases Max power from grid option in Installer menu.''

= Schedule =
There is an option to configure individual charging times in order to plan electricity usage or the effectiveness of the electrical grid.<br>

* For the time periods when the car should not be charged, select the ‘Peak hours’ section.<br>
* For time periods when the car should be charged, select the ‘Schedule‘ section (click on the '''+''' icon in the upper right corner).<br>

To set charging schedules, choose the desired hours and minutes on the provided clock.<br>

The ‘Repeat schedule‘ function repeats every week on the selected days.
When the ‘Repeat schedule‘ function is disabled, the selected charging schedule will be set only for the week ahead and will stop after the last set day. In this case, the ‘Enable schedule charging‘ function will be automatically disabled. If the ‘Start time‘ is set in the past, the schedule will be active on the next selected day of the week. For example, if the current time is 10 AM on Friday, but the ‘Start time‘ is scheduled for 9 AM on Friday, it will only be active on the following Friday at 9 AM.<br>

The ‘Enable schedule charging‘ function will be disabled at midnight after the end of a schedule.
It is important to optimize the active schedules and ensure that they do not overlap. '''Charger will not allow to save active overlapping schedules.''' However, when schedules are disabled, it can be saved.<br>

If peak hours are set for one time and scheduled charging hours are set later on the same day, there is a contradiction between these two conditions, and the EV will not be charged during the period between them. For example, if peak hours are set from 2 PM to 3 PM and regular scheduled charging hours are set from 5 PM to 7 PM, the EV will be charged only from 5 PM to 7 PM.

= Randomized delay =
The randomized delay function provides an additional layer of protection against grid overloading. In the following cases, a random delay of up to 10 minutes will be applied:

* ''When a vehicle is connected and attempting to initiate the charging process for the first time.''
* ''At the beginning and end of each scheduled charging session.''
* ''After TeltoCharge has been restarted, rebooted, or turned off.''

Although this feature is enabled, it can be manually interrupted by swiping the App slider or using an NFC card.<br>

Using the Randomized delay function along with scheduled charging hours, the EV will only begin charging after waiting for the scheduled time and adding a randomized delay of up to 10 minutes. Similarly, a randomized delay will be applied to the scheduled end of charging.<br>

If the EV charging process is interrupted (e. g. temporary power outage), the randomized delay will still be in effect when the power is restored, further delaying the start of charging.<br>

When OCPP is turned on, the Randomized delay functionality will not be active.

= Errors and warnings =
If TeltoCharge is not working correctly and giving errors or warnings, you will now be able to see more information in the app. All errors and warnings will be sent to the app in real-time.
For all the details check: [https://wiki.teltonika-energy.com/view/LED_indicators LED indicators list]

= Live data =
Live data from TeltoCharge. It will be possible to see such data as:

* ''Charging type''
* ''Phase used''
* ''Temperature''
* ''Max allowed current''
* ''Phase voltages (input and output)''

= Connectivity=
In the connectivity tab user can connect TeltoCharge to internet via Wi-Fi, Ethernet cable or GSM card (if it is selected as product option).

In this section, it is also possible to connect charging station to internet server for remote management (OCPP).

==WiFi==
To connect Teltocharge to Wi-Fi, just follow these steps:

*''Open Wi-Fi tab;''
*''Enable it with the slider;''
*''Select your network from provided list;''
*''Insert password and press save;''
*''Wait until product is connected successfully;''

==Mobile ==
''Optional. About possible purchase ask your sales manager'' <br/>
To connect TeltoCharge to cellular data first of all nano SIM card have to be inserted to the SIM card port. After that just enable Mobile Internet in the Connectivity tab with the slider.

Mobile internet tab also has got some configurations which can be set by user:

*''PIN code''
*''APN adress''
*''Username''
*''Password''
*''Dialing number''

==OCPP==
Open Charge Point Protocol 1.6 is used to connect TeltoCharge to 3rd party Cloud servers. At the moment charger is able to achieve ''"Core"'', ''"Local auth list management"'' and ''"Smart charging"'' functions.

Before connecting TeltoCharge to any 3rd party Charge point management server, firstly check if server is compatible with OCPP 1.6 JSON.

If server provider supports this OCPP version, to connect, user needs to type in server URL address and Charge point identity. After all settings are set, enable OCPP with a slider and press Save at the bottom of the screen. User also can see status if charger was connected successfully or not.

More information about OCPP you can find [[OCPP FAQ|here]].

==Ethernet ==
To connect TeltoCharge with Ethernet just plug in the cable and all needed settings should be set automatically.

In order to be able to type configuration manually, user have to disable DHCP setting beforehand. DHCP slider can be found in the same Ethernet parameters window.

==Date & Time==
In this tab user can set date and time according to the region in which product is going to be used. '''It is recommended to synchronize''' time with phone (button for this action is provided).

=Device info=
In this tab user/installer can see all the HW information about charger, maximum current set by installer (inside installer menu) and real-time temperature.

Also there is a possibility to restore default settings. With this function TeltoCharge restore all settings to default values except from the Installer Menu ones.
<br>

After pressing '''Check for updates''', new window pops up, where user/installer can see information about current FW and update it.

==Diagnostics==

Here you can download troubleshoot file. <br>
It will be used only by the Customer support engineers while solving risen issues.

=Installer menu=
This is the menu for installer to reach configuration settings.

After every installation installer must open this menu and set required parameters.

To open installer menu, it is needed to insert ''Installer code''. You can find this code on the sticker, which is placed on the middle plate (under the front plate).

<u>*Installer menu is '''only''' for installers or personnel with relevant qualifications.*</u>

==Max power from grid==
This configuration shall be used in two different ways:

*If you <u>are</u> using Dynamic load balancing, use this value to set the maximum current per phase that can be supplied to the whole electrical installation. Usually this value is the rated current of the main circuit breaker.
* If you <u>are no</u>t using Dynamic load balancing, use this value to set maximum current, which charger can use. This value should be calculated according to the possible load, that other appliances can be using, by subtracting it from the maximal current which is provided to the grid. That said, in this situation, current should not be higher than 16 amperes (If 11 kW charger is installed) or 32 amperes ( if 7,4 or 22 kW chargers is installed).

'' By default this setting is set to 10 Amps''

== Supply voltage ==
*Installer can change supply voltage (''voltage between phase and neutral wires'')
*Different regions can have different supply voltages, so installer can set this value accordingly to the used voltage in the individual site;

''Global product: By default this setting is set to 230 V''<br>
''North American product: By default this setting is set to 120 V''

==Upper voltage tolerance==
There is a possibility to change the tolerance limit for upper voltage threshold. This can be used in the sites where voltage fluctuation is recurring.

''By default this setting is set to 10 %''

== Lower voltage tolerance==
There is possibility to change the tolerance limit for lower voltage threshold. This can be used in the sites where voltage fluctuation is big.

''By default this setting is set to 10 %''

==Three phase charging==
With this slider installer have an ability to turn off 3-phase charging (only if 3 phases are connected to the product).

''By default this setting is turned OFF''<br>
''Not available in North America products''

==Phase priority==
There is a possibility to select which phase should be prioritized for charging, if 3 phases are connected, but 3-phase charging is disconnected.

For example: if 3 chargers are connected to the same electrical network, it is possible to prioritize different phase for each charger to avoid cutting of the main power.

''By default this setting is set to L1''<br>
''Not available in North America products''

==Dynamic load balancing==
This function is used to turn on Dynamic load balancing. To access this feature it is recommended to read more [[Dynamic Load Balancing|here]]

''By Default this setting is turned off''<br>
''Not available in North America products''

== Energy meter type selection ==
Be able to choose energy meter type, which will be used for the load balancing. Meter type setting is available in the app and the setting has two options: 1 phase, 3 phase

== Use data from energy meter ==
Option to use data from external energy meter for power consumption calculations. New setting in the app for activating this function. Total values from energy meter also will be used in the OCPP. When this function is activated, dynamic load balancing function will not be active.

==Use preferred phase==
This function can be used if Dynamic load balancing is ON. With this feature installer can enable charger to use Preferred phase for charging process.

''By default this setting is turned off''
==Difference between phases==
This function let user to select how theirs power input is wired - in Star network or Delta network style. <br>
120° - Star (Wye) and Delta; <br>
180° - Delta and split phase.

In the case of Europe, most Star (Wye) and Delta connections will have a phase difference of 120°. In North America, the phase shift can be 180° when split phase connection type is used or in the case of Delta connection with center tap on one leg.

''Note: these parameters are used only for the power consumption (kWh) calculations and not influence operation of the charger.''

''Global product: By default this setting is marked as 120° ''<br>
''North American product: By default this setting is marked as 180°''

==Use neutral as phase==
This function allows user to use electrical network without Neutral wire. L1 then must be connected to N(L1) pin in input terminal.

''Global product: By default this setting is turned OFF''<br>

''North American product: By default this setting is turned ON''

==Allow simplified charging sequence==
There are electrical vehicles which do not use B state to start charging process and charging states goes directly from A to C. For that it requires simplified charging sequence enabled. If this option is turned OFF, TeltoCharge will not start charging with this type of EV connected.

''By default this setting is turned OFF''

==Charging location is ventilated==
There are electrical vehicles which requires ventilation (charging is done on state D), because they use lead batteries and it is of great importance to ventilate them.

If EV sends signal to go to state D, but charger is not installed outside and this parameter is set to „NO“- charging will not be started.

If TeltoCharge is installed outside, set this setting to ''YES.''

''By default this setting is set to NO''

==Temperature warning==
There is a possibility to increase temperature warning level. When charger reaches this temperature level, it starts to ventilate itself by decreasing charging power. If Charger reaches 80''°C'' it turns off relays and stops charging process.

''By default this setting is set to 60 °C''

==Factory default settings==
By using this setting installer can restore Factory default settings. This function restores all settings which were set in the Installer menu as well as in the Main menu.

After this reset yellow LEDs starts blinking which means that charger requires to set-up Installer menu again.

==Reboot device==
There is a possibility to reboot charger through the Teltonika Energy app.

[[Category: Product guides]]

External control RS485

2025-06-30T12:15:24Z

Vaidotas Seliukas: Protected "External control RS485" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))

=External control RS485=
This section provides an overview of the Modbus RTU interface supported by TeltoCharge electric vehicle supply equipment (EVSE). The document provides description of the available Modbus registers for the external control and communication with the charger based on a wired RS485 connection. This functionality is only available when the charger is configured as a secondary (server) device and waits for acceptable commands from the primary (client) device. The secondary device can operate on two modes:

# It can be configured to use a watchdog for communication and if no valid communication is present after a configurable time interval, the charging (if ongoing) will stop and EVSE will not perform any charging until valid communication is reestablished;
# the EVSE does not use a watchdog and continuous communication is not needed. As it is possible to change the EVSE settings by using the TeltoCharge mobile application, it is recommended for the primary device to read, compare, and change settings as needed based on user preferences and real-time requirements, ensuring a seamless and secure charging experience for electric vehicle owners. Continuous monitoring and adjustment of EVSE settings enable the primary device to stay synchronized with user inputs, maintain optimal charging conditions, and promptly respond to any changes initiated through the TeltoCharge mobile application, thereby enhancing overall efficiency and user satisfaction.
==Device preparation==
TeltoCharge must be configured as a secondary device via a TeltoCharge mobile application and device must have RS485 wired connection with the primary device..

# Open "User menu"
# Open "Installer menu"
# Open "Load Managment"
# Select "Secondary"
# Enable secondary device
# Check if the address is expected in your system

[[File:External.png|frameless|900x900px]]
[[File:External connection2.png|frameless|400x400px]]

==Modbus Register Map==
{| class="wikitable"
|+
!Address
!Type
!Name
!Format
!Values
!Default value
!Unit
!Comment
|-
|0
|R
|'''Voltage L1'''
|int16
| -32768 - 32767
| -
|V
|Input voltage on L1
|-
|1
|R
|'''Voltage L2'''
|int16
| -32768 - 32767
| -
|V
|Input voltage on L2
|-
|2
|R
|'''Voltage L3'''
|int16
| -32768 - 32767
| -
|V
|Input voltage on L2
|-
|3
|R
|'''Current L1'''
|int16
| -32768 - 32767
| -
|*10 A
|Current on L1
|-
|4
|R
|'''Current L2'''
|int16
| -32768 - 32767
| -
|*10 A
|Current on L2
|-
|5
|R
|'''Current L3'''
|int16
| -32768 - 32767
| -
|*10 A
|Current on L3
|-
|6
|R
|'''EVSE status'''
|uint16
|0-9
| -
| -
|Evse state in DLM (see "a" below)
|-
|7
|R
|'''EVSE status time 1st word'''
|uint16
| -32768 - 32767
| -
|s
|Evse status time, first word (uint16_t)
|-
|8
|R
|'''EVSE status time 2nd word'''
|uint16
| -32768 - 32767
| -
|s
|Evse status time, second word (uint16_t) >> 16
|-
|9
|R
|'''EVSE ID'''
|uint16
|21571
|21571("TC")
| -
|Teltocharge ID
|-
|10
|R
|'''EVSE 3ph config'''
|uint16
|0-1
| -
| -
|0 - not possible, 1 - possible
|-
|11
|R
|'''Phase change'''
|uint16
|0-1
| -
| -
|0 - not possible, 1 - possible
|-
|12
|R
|'''Amp limit'''
|uint16
|0,6-32
| -
|A
|Max amps the EVSE can supply
|-
|13
|R
|'''Phase connected'''
|uint16
|0-6
| -
| -
|0 - L1,
1 - L2,
2 - L3,
3 - L1/L2,
4 - L1/L3,
5 - L2/L3,
6 - 3ph
7 - none
|-
|14
|R/W
|'''Phase to use'''
|uint16
|0-7
| -
| -
|Sets which phase to use for slave,
0 - L1,
1 - L2,
2 - L3,
3 - L1/L2,
4 - L1/L3,
5 - L2/L3,
6 - 3ph,
7 - none
|-
|15
|R/W
|'''Amps to use'''
|uint16
|0, 6-32
| -
|A
|Sets max allowed from primary to secondary
|-
|16
|R/W
|'''Request stop charging'''
|uint16
|0-1
| -
| -
|Request stop charging
|-
|17
|R/W
|'''Request authorize'''
|uint16
|0-1
| -
| -
|Request authorization
|-
|18
|R/W
|'''Lock/unlock socket'''
|uint16
|0-2
|0
| -
|0 - auto lock,
1 - always lock,
2 - force unlock in auto mode (resets on state A)
|-
|19
|R/W
|'''Communication timeout'''
|uint16
|0-600
|30
|s
|Defines communication watchdog (0 - no req for periodic comm)
|-
|20
|R/W
|'''Failsafe current'''
|uint16
|0, 6-32
|6
|A
|Defines max allowed current on comm timeout
|-
|21
|R/W
|'''Request reboot'''
|uint16
|0-1
|0
| -
|Request reboot
|-
|22
|R
|'''Require authorization'''
|uint16
|0-1
| -
| -
|Defines requirement for authorization
|-
|23
|R
|'''Product code'''
|uint16
|0-9999
|1234
| -
|Product code EVCxxxx
|-
|24
|R
|'''Serial number 1st word'''
|
|0-65535
|123456789
|s
|Serial number, first word (uint16_t)
|-
|25
|R
|'''Serial number 2nd word'''
|
|0-65535
|
|s
|Serial number, second word (uint16_t) >> 16
|-
|26
|R
|'''FW version'''
|uint16
|11200-29999
| -
| -
|FW version
|-
|27
|R
|'''Charge point state'''
|uint16
|0-9
| -
| -
|Defines charge point state (see "b" below)
|-
|28
|R
|'''Max power from grid'''
|uint16
|6-1000
|30
| -
|Defines max power from grid
|-
|29
|R
|'''User settable max current'''
|uint16
|6-32
|10
| -
|Defines max settable current by user
|-
|30
|R
|'''Lock status'''
|uint16
|0-1
| -
| -
|0 - unlocked,
1 - locked
|-
|31
|R
|'''Internal temperature'''
|int16
| -400 - +1250
| -
|*10°C
|Device's temperature
|-
|32
|R
|'''OCPP connected'''
|uint16
|0-1
| -
| -
|0 - off,
1 - on
|-
|33
|R
|'''IEC state'''
|uint16
|0-8
| -
| -
|IEC state (see "c" below)
|-
|34
|R
|'''Warning code'''
|uint16
|0-65535
| -
| -
|Warning code with bit positions (see "d" below)
|-
|35
|R
|'''Error code'''
|uint16
|0-65535
| -
| -
|Error code with bit positions (see "e" below)
|-
|36
|R
|'''Current limit cause'''
|uint16
|0-8
| -
| -
|Cause of current limit (see "f" below)
|-
|37
|R
|'''Max supported power'''
|uint16
|0-2
| -
| -
|0 - 7.4 kW (1ph 32 A),
1 - 11 kW (3ph 16 A),
2 - 22 kW (3ph 32 A)
|-
|38
|R
|'''Instant active power'''
|uint16
|0-65535
| -
|W
|Instant power
|-
|39
|R
|'''Energy delivered'''
|uint16
|0-65535
| -
|*100kWh
|Total supplied active power per session
|-
|40
|R
|'''Session duration'''
|uint16
|0-65535
| -
|s
|Session duration
|-
|41
|R
|'''Total kWh supplied 1st word'''
|uint16
|0-65535
| -
|*100kWh
|Total supplied active power in a lifetime (uint16_t)
|-
|42
|R
|'''Total kWh supplied 2nd word'''
|uint16
|0-65535
| -
|*100kWh
|Total supplied active power in a lifetime (uint16_t) >> 16
|-
|43
|R
|'''Total kWh supplied 3rd word'''
|uint16
|0-65535
| -
|*100kWh
|Total supplied active power in a lifetime (uint16_t) >> 32
|-
|44
|R
|'''Total kWh supplied 4th word'''
|uint16
|0-65535
| -
|*100kWh
|Total supplied active power in a lifetime (uint16_t) >> 48
|}
{| class="wikitable"
|+Explanation
|'''a'''
|0 - C: charging;
1 - B1: EV connected, authorization granted, waiting for EV to start charging;

2 - B2: EV connected, authorization granted, was charging, not enough power;

3 - B3: EV connected, authorization granted, wasn't charging, not enough power;

4 - D1: EV connected, charging stopped by EV;

5 - D2: EV connected, no authorization;

6 - D3: EV connected, simplified CP or D state charging not allowed;

7 - A: EV not connected;
8 - F: Error state;
9 - E: Unknown state.
|-
|'''b'''
|0 – no EV connected;
1 – vehicle connected, awaiting permission to charge;

2 – charging authorized;

3 – charging in progress;

4 – charging paused;

5 – charge successful (EV connected);

6 – charge stopped by the user;

7 – charging error;

8 – charging station reserved, no EV connected;

9 – other.
|-
|'''c'''
|0 – A: no vehicle connected;
1 – B1: EV connected, pending authorization, no PWM;

2 – B2: EV connected, EVSE ready for charging, PWM active (state B2);

3 – C1: ready to charge or stop charge request by EVSE, S2 closed, no PWM;

4 – C2: charging EV;

5 – D1: ready to charge or stop charge request by EVSE, S2 closed, ventilation required, no PWM;

6 – D2: charging EV, ventilation required;

7 – E: control pilot (CP) fault;

8 – F: EVSE fault.
|-
|'''d'''
|0 – midplate is open (HW-dependent);
1 – temperature warning;

2 – current draw is higher than allowed;

3 – charging requires ventilation;

4 – real time clock lost;

5 – simplified cp sequence denied;

6 – simplified cp sequence detected;

7 – charging without ventilation denied;

8 – PEN CT clamp not calibrated (HW-dependent);

9 – NFC module fault;

10 – PEN fault was detected (HW-dependent).
|-
|'''e'''
|0 – input voltage not in range;
1 – output voltage not in range;

2 – current leakage sensor test failed;

3 – EV diode is failed, or fault in CP line;

4 – overcurrent error;

5 – temperature error;

6 – PEN fault active (UK HW only);

7 – proximity pilot (cable, socket) error;

8 – current leakage detected;

9 – socket lock error;

10 – internal error.
|-
|'''f'''
|0 – Hardware limits;
1 – Max power from grid;

2 – User setting (static load balance);

3 – Charging cable;

4 – Simple CP sequence;

5 – EVSE default settings;

6 – Load balance;

7 – Temperature.
|}

EVC 2 Declarations of conformity

2025-06-05T08:31:10Z

Vaidotas Seliukas:

= Declarations for EVC200-EVC201 products group =
<center> Here are uploaded newest Declaration of conformity versions for available products. <br> <center>
'''Note:''' Thumbnails might differ from main document contents.

== EVC20X0 series declarations ==
[[File: EVC2 7.4kW DoC thbnl.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/1/15/EVC2XX_EU_DECLARATION_OF_CONFORMITY_7.4kW_Teltonika_Energy-2025-06-04.pdf|thumb]]

== EVC20X1 series declarations ==
[[File:EVC2 11kW DoC thbnl.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/5/5b/EVC2XX_EU_DECLARATION_OF_CONFORMITY_11kW_Teltonika_Energy.pdf|thumb]]

== EVC20X2 series declarations ==
[[File:EVC2 22kW DoC thbnl.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/1/10/EVC2XX_EU_DECLARATION_OF_CONFORMITY_22kW_Teltonika_Energy-2025-06-04.pdf|thumb]]

File:EVC2 7.4kW DoC thbnl.png

2025-06-05T08:28:14Z

Vaidotas Seliukas: Thumbnail for EVC2 7.4kW declaration of conformity file

== Summary ==
Thumbnail for EVC2 7.4kW declaration of conformity file

File:EVC2 11kW DoC thbnl.png

2025-06-05T08:27:58Z

Vaidotas Seliukas: Thumbnail for EVC2 11kW declaration of conformity file

== Summary ==
Thumbnail for EVC2 11kW declaration of conformity file

File:EVC2 22kW DoC thbnl.png

2025-06-05T08:27:41Z

Vaidotas Seliukas: Thumbnail for EVC2 22kW declaration of conformity file

== Summary ==
Thumbnail for EVC2 22kW declaration of conformity file

EVC 2 Declarations of conformity

2025-06-05T08:24:46Z

Vaidotas Seliukas:

= Declarations for EVC200-EVC201 products group =
<center> Here are uploaded newest Declaration of conformity versions for available products. <br> <center>
'''Note:''' Thumbnails might differ from main document contents.

== EVC20X0 series declarations ==
[[File: DoC EVC10X Teltocharge Signed.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/1/15/EVC2XX_EU_DECLARATION_OF_CONFORMITY_7.4kW_Teltonika_Energy-2025-06-04.pdf|thumb]]

== EVC20X1 series declarations ==
[[File: DoC EVC11X Teltocharge Signed.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/5/5b/EVC2XX_EU_DECLARATION_OF_CONFORMITY_11kW_Teltonika_Energy.pdf|thumb]]

== EVC20X2 series declarations ==
[[File: DoC EVC12X Teltocharge Signed.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/1/10/EVC2XX_EU_DECLARATION_OF_CONFORMITY_22kW_Teltonika_Energy-2025-06-04.pdf|thumb]]

File:EVC2XX EU DECLARATION OF CONFORMITY 11kW Teltonika Energy.pdf

2025-06-05T08:23:49Z

Vaidotas Seliukas: V1.0 of EVC2 DoC CE

== Summary ==
V1.0 of EVC2 DoC CE

EVC 2 Declarations of conformity

2025-06-04T14:11:00Z

Vaidotas Seliukas: Created page with "= Declarations for EVC200-EVC201 products group = <center> Here are uploaded newest Declaration of conformity versions for available products. <br> <center> '''Note:''' Thumbnails might differ from main document contents. == EVC20X0 series declarations == thumb == EVC20X1 series d..."

= Declarations for EVC200-EVC201 products group =
<center> Here are uploaded newest Declaration of conformity versions for available products. <br> <center>
'''Note:''' Thumbnails might differ from main document contents.

== EVC20X0 series declarations ==
[[File: DoC EVC10X Teltocharge Signed.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/1/15/EVC2XX_EU_DECLARATION_OF_CONFORMITY_7.4kW_Teltonika_Energy-2025-06-04.pdf|thumb]]

== EVC20X1 series declarations ==
[[File: DoC EVC11X Teltocharge Signed.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/4/4b/Teltocharge_DoC_EVC11X_Signed.pdf|thumb]]

== EVC20X2 series declarations ==
[[File: DoC EVC12X Teltocharge Signed.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/1/10/EVC2XX_EU_DECLARATION_OF_CONFORMITY_22kW_Teltonika_Energy-2025-06-04.pdf|thumb]]

Compliance documentation EVC2

2025-06-04T14:08:18Z

Vaidotas Seliukas:

Here you may find legal documentation of EVC 2 product

<font size="3.5">
→ [[EVC2 DoC|Declarations of conformity]] <br>
''A formal declaration by a „Teltonika Energy“ that the product to which it applies meets all
relevant requirements of all product safety directives applicable to that product.''<br>
→ [[EVC2 environmental|Environmental]] <br>
''It adresses production and use of chemical substances, and their potential impacts on both human health and the environment.
Also, directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.'' <br>

Compliance documentation EVC2

2025-06-04T14:04:55Z

Vaidotas Seliukas: Created page with "Here you may find legal documentation of EVC 2 product <font size="3.5"> → Declarations of conformity <br> ''A formal declaration by a „Teltonika Energy“ that the product to which it applies meets all relevant requirements of all product safety directives applicable to that product.''<br> → Environmental <br> ''It adresses production and use of chemical substances, and their potential impacts on both human health and the environment. Also, d..."

Here you may find legal documentation of EVC 2 product

<font size="3.5">
→ [[Declarations of conformity]] <br>
''A formal declaration by a „Teltonika Energy“ that the product to which it applies meets all
relevant requirements of all product safety directives applicable to that product.''<br>
→ [[Environmental]] <br>
''It adresses production and use of chemical substances, and their potential impacts on both human health and the environment.
Also, directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.'' <br>

File:EVC2XX EU DECLARATION OF CONFORMITY 22kW Teltonika Energy-2025-06-04.pdf

2025-06-04T13:49:52Z

Vaidotas Seliukas: CE EVC2 Declaration of conformity 22kW V1

== Summary ==
CE EVC2 Declaration of conformity 22kW V1

File:EVC2XX EU DECLARATION OF CONFORMITY 7.4kW Teltonika Energy-2025-06-04.pdf

2025-06-04T13:49:10Z

Vaidotas Seliukas: CE EVC2XX declaration of conformity

== Summary ==
CE EVC2XX declaration of conformity

Datasheet

2025-06-03T04:43:33Z

Vaidotas Seliukas:

== Datasheet (Global) ==
<p style="text-align:center;">Here you can download latest global TeltoCharge datasheet, just press on the picture.</p>
[[File:Datasheet GLOBAL.V.20.05.24-(Virselis).jpg|alt=|center|frame|299x299px|link=https://wiki.teltonika-energy.com/images/f/f4/TeltoCharge_Datasheet_EVC10-12_25.06.02.pdf]]

== [[Additional languages|Additional languages]] ==
Here you would be able to find datasheets translated to different languages than English

== [[Separate datasheets|Separated variants]] ==
Here you would be able to find datasheets meant for individual projects - split according to version codes.

[[Category: General information]]

File:TeltoCharge Datasheet EVC10-12 25.06.02.pdf

2025-06-03T04:41:57Z

Vaidotas Seliukas: Grammar mistakes in RS485 fixed

== Summary ==
Grammar mistakes in RS485 fixed

Datasheet

2025-05-27T11:29:40Z

Vaidotas Seliukas:

== Datasheet (Global) ==
<p style="text-align:center;">Here you can download latest global TeltoCharge datasheet, just press on the picture.</p>
[[File:Datasheet GLOBAL.V.20.05.24-(Virselis).jpg|alt=|center|frame|299x299px|link=https://wiki.teltonika-energy.com/images/b/b6/TeltoCharge_Datasheet_EVC10-12.pdf]]

== [[Additional languages|Additional languages]] ==
Here you would be able to find datasheets translated to different languages than English

== [[Separate datasheets|Separated variants]] ==
Here you would be able to find datasheets meant for individual projects - split according to version codes.

[[Category: General information]]

File:TeltoCharge Datasheet EVC10-12.pdf

2025-05-27T11:28:35Z

Vaidotas Seliukas: EVC10-12 series Datasheet

== Summary ==
EVC10-12 series Datasheet

File:TeltoCharge Datasheet GLOBAL .pdf

2025-05-27T11:26:58Z

Vaidotas Seliukas: EVC10-12 series Datasheet

== Summary ==
EVC10-12 series Datasheet

Solar integration

2025-05-20T10:28:22Z

Vaidotas Seliukas: /* Solar Settings Adjustment */

__TOC__
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> Physical installation </h2>
<ol style="list-style-type: none; margin: 0; padding: 0;">
*To ensure proper solar integration functionality, it is essential to begin with the correct physical installation. This involves having a smart energy meter installed in the electric circuit that possesses the necessary communication functionality and is included in our [[Smart energy meters|energy meter list]]. The meter plays a crucial role in detecting negative current flow, indicating when energy consumption is lower than solar generation, and feeding it back into the electrical grid. For effective communication, the charger must be interconnected with the meter.

*When the meter detects surplus energy, it relays this information to the charger. Based on the charger's internal configurations, it will determine whether to initiate the charging process or not. It is important to note that this process depends on the specific configurations set within the charger.<br>
<br>
'''Note:''' Solar functionality is not available for EVC131 family products yet.

[[File:Solar integration overview.png|frameless|1200x900px]]
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> SOLAR SETTINGS </h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">

Once the charger is properly connected to the electrical grid and interconnected with the energy meter, the next step is to configure the settings using the Teltonika Energy app.
<br>Below, you will find a comprehensive list of the settings that should be adjusted to achieve solar functionality.

<ol>
<li>Open '''''"User Menu"'''''</li>
<li>Open "'''''Installer Menu'''''"</li>
<li>Open "'''''Dynamic Load Balancing'''''" menu</li>
<li>Enable "'''''Load Balancing'''''"</li>
<li>Enable "'''''Solar Charging'''''"</li>
<li>If smart meter is connected with RS485 wires, press "'''''Search For Device'''''"</li>
<li>*'''ONLY If TeltoCharge is unable''' to identify energy meter - use "'''''Manual Setup'''''" </li><br>

[[File:Solar Settings.png|frameless|900x900px|none]]

=== Solar Settings Adjustment ===
<br>
[[File:Solar adjustment.png|Frameless|600x600px|none]]<br>

#'''ECO+ surplus minimum''' - This setting requires the minimum value of surplus solar energy to be reached in order to initiate a charging session. If the minimum value of surplus energy is not achieved, the charger will remain in "On hold" mode, awaiting additional surplus energy. <br>
#'''ECO charging minimum''' - This setting specifies the minimum value required to commence the charging process.
<br>
<br>

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> Charging modes </h2>
<ol style="list-style-type: none; margin: 0; padding: 0;">

With TeltoCharger chargers, you can achieve three different solar charging modes, each offering unique benefits for various situations:<br>

*'''Solar only charging profile''' - In this profile, the charging process is initiated solely using green energy. The minimum required value is 6 Amps. If there is less surplus energy available than 6 A, the charger will remain in "On hold" mode.
*'''ECO+ charging profile''' - In this profile, the charging process is initiated using a combination of solar energy and grid energy. The user sets the ECO+ surplus minimum value, which determines the minimum surplus energy required to start the charging process. If the set value is less than 6A, the difference in current will be supplemented with grid power.

Example:<br>
''ECO+ surplus minimum value set to 1 A<br>
0 A (from solar) = charging process is not initiated<br>
1 A (from solar) + 5 A (from grid) = 6 A charging current<br>
5 A (from solar) + 1 A (from grid) = 6 A charging current<br>
10 A (from solar) + 0 A (from grid) = 10 A charging current
*'''ECO charging profile''' - In this profile, the charging process is initiated using maximum available solar energy in combination with grid energy. The user sets the ECO charging minimum value, which determines the minimum charging current. This charging current is first covered by the maximum solar energy available and then supplemented with grid energy.

Example:<br>
''ECO charging minimum value set to 10 A<br>
If 5 A (from solar) + 5 A (from grid) = 10 A charging current<br>
If 9 A (from solar) + 1 A (from grid) = 10 A charging current<br>
If 16 A (from solar) + 0 A (from grid) = 16 A charging current<br>
If 0 A (from solar) + 10 A (from grid) = 10 A charging current

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> Additional information </h2>
<ol style="list-style-type: none; margin: 0; padding: 0;">

There is additional information that is important to know when using solar integration, specifically regarding timers that dictate the start and stop of the charging process. <br>
<br>

If the Solar or ECO+ mode is being utilized and there is a sudden shortage of solar power to charge the electric vehicle, the charger will compensate by drawing charging power from the grid for the following 30 seconds and limiting the maximum current to 6 A until enough solar power is available. If no sufficient solar power is available after 30 seconds, the charger will transition to the "On hold" state and await the availability of additional surplus energy. Once there is sufficient surplus energy, the charger initiates a 2-minute timer during which it verifies the sustained presence of enough solar energy. After the 2-minute interval elapses, the charger proceeds to the charging process. <br>
<br>

This mechanism ensures that the charging process is flexible and responsive to variations in solar energy availability. By incorporating timers and checks, the charger optimizes the utilization of solar power while maintaining a reliable and efficient charging experience for electric vehicle owners.

<ul style="list-style-type: none; margin: 0; padding: 0;">

[[Category: Advanced Topics]]

Solar integration

2025-05-20T10:24:51Z

Vaidotas Seliukas:

__TOC__
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> Physical installation </h2>
<ol style="list-style-type: none; margin: 0; padding: 0;">
*To ensure proper solar integration functionality, it is essential to begin with the correct physical installation. This involves having a smart energy meter installed in the electric circuit that possesses the necessary communication functionality and is included in our [[Smart energy meters|energy meter list]]. The meter plays a crucial role in detecting negative current flow, indicating when energy consumption is lower than solar generation, and feeding it back into the electrical grid. For effective communication, the charger must be interconnected with the meter.

*When the meter detects surplus energy, it relays this information to the charger. Based on the charger's internal configurations, it will determine whether to initiate the charging process or not. It is important to note that this process depends on the specific configurations set within the charger.<br>
<br>
'''Note:''' Solar functionality is not available for EVC131 family products yet.

[[File:Solar integration overview.png|frameless|1200x900px]]
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> SOLAR SETTINGS </h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">

Once the charger is properly connected to the electrical grid and interconnected with the energy meter, the next step is to configure the settings using the Teltonika Energy app.
<br>Below, you will find a comprehensive list of the settings that should be adjusted to achieve solar functionality.

<ol>
<li>Open '''''"User Menu"'''''</li>
<li>Open "'''''Installer Menu'''''"</li>
<li>Open "'''''Dynamic Load Balancing'''''" menu</li>
<li>Enable "'''''Load Balancing'''''"</li>
<li>Enable "'''''Solar Charging'''''"</li>
<li>If smart meter is connected with RS485 wires, press "'''''Search For Device'''''"</li>
<li>*'''ONLY If TeltoCharge is unable''' to identify energy meter - use "'''''Manual Setup'''''" </li><br>

[[File:Solar Settings.png|frameless|900x900px|none]]

=== Solar Settings Adjustment ===
[[File:Solar adjustment.png|Frameless|600x600px|none]]<br>

#'''ECO+ surplus minimum''' - This setting requires the minimum value of surplus solar energy to be reached in order to initiate a charging session. If the minimum value of surplus energy is not achieved, the charger will remain in "On hold" mode, awaiting additional surplus energy. <br>
#'''ECO charging minimum''' - This setting specifies the minimum value required to commence the charging process.
<br>
<br>

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> Charging modes </h2>
<ol style="list-style-type: none; margin: 0; padding: 0;">

With TeltoCharger chargers, you can achieve three different solar charging modes, each offering unique benefits for various situations:<br>

*'''Solar only charging profile''' - In this profile, the charging process is initiated solely using green energy. The minimum required value is 6 Amps. If there is less surplus energy available than 6 A, the charger will remain in "On hold" mode.
*'''ECO+ charging profile''' - In this profile, the charging process is initiated using a combination of solar energy and grid energy. The user sets the ECO+ surplus minimum value, which determines the minimum surplus energy required to start the charging process. If the set value is less than 6A, the difference in current will be supplemented with grid power.

Example:<br>
''ECO+ surplus minimum value set to 1 A<br>
0 A (from solar) = charging process is not initiated<br>
1 A (from solar) + 5 A (from grid) = 6 A charging current<br>
5 A (from solar) + 1 A (from grid) = 6 A charging current<br>
10 A (from solar) + 0 A (from grid) = 10 A charging current
*'''ECO charging profile''' - In this profile, the charging process is initiated using maximum available solar energy in combination with grid energy. The user sets the ECO charging minimum value, which determines the minimum charging current. This charging current is first covered by the maximum solar energy available and then supplemented with grid energy.

Example:<br>
''ECO charging minimum value set to 10 A<br>
If 5 A (from solar) + 5 A (from grid) = 10 A charging current<br>
If 9 A (from solar) + 1 A (from grid) = 10 A charging current<br>
If 16 A (from solar) + 0 A (from grid) = 16 A charging current<br>
If 0 A (from solar) + 10 A (from grid) = 10 A charging current

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> Additional information </h2>
<ol style="list-style-type: none; margin: 0; padding: 0;">

There is additional information that is important to know when using solar integration, specifically regarding timers that dictate the start and stop of the charging process. <br>
<br>

If the Solar or ECO+ mode is being utilized and there is a sudden shortage of solar power to charge the electric vehicle, the charger will compensate by drawing charging power from the grid for the following 30 seconds and limiting the maximum current to 6 A until enough solar power is available. If no sufficient solar power is available after 30 seconds, the charger will transition to the "On hold" state and await the availability of additional surplus energy. Once there is sufficient surplus energy, the charger initiates a 2-minute timer during which it verifies the sustained presence of enough solar energy. After the 2-minute interval elapses, the charger proceeds to the charging process. <br>
<br>

This mechanism ensures that the charging process is flexible and responsive to variations in solar energy availability. By incorporating timers and checks, the charger optimizes the utilization of solar power while maintaining a reliable and efficient charging experience for electric vehicle owners.

<ul style="list-style-type: none; margin: 0; padding: 0;">

[[Category: Advanced Topics]]

Solar integration

2025-05-20T10:23:56Z

Vaidotas Seliukas:

__TOC__
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> Physical installation </h2>
<ol style="list-style-type: none; margin: 0; padding: 0;">
*To ensure proper solar integration functionality, it is essential to begin with the correct physical installation. This involves having a smart energy meter installed in the electric circuit that possesses the necessary communication functionality and is included in our [[Smart energy meters|energy meter list]]. The meter plays a crucial role in detecting negative current flow, indicating when energy consumption is lower than solar generation, and feeding it back into the electrical grid. For effective communication, the charger must be interconnected with the meter.

*When the meter detects surplus energy, it relays this information to the charger. Based on the charger's internal configurations, it will determine whether to initiate the charging process or not. It is important to note that this process depends on the specific configurations set within the charger.<br>
<br>
'''Note:''' Solar functionality is not available for EVC131 family products yet.

[[File:Solar integration overview.png|frameless|1200x900px]]
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> SOLAR SETTINGS </h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">

Once the charger is properly connected to the electrical grid and interconnected with the energy meter, the next step is to configure the settings using the Teltonika Energy app.
<br>Below, you will find a comprehensive list of the settings that should be adjusted to achieve solar functionality.

<ol>
<li>Open '''''"User Menu"'''''</li>
<li>Open "'''''Installer Menu'''''"</li>
<li>Open "'''''Dynamic Load Balancing'''''" menu</li>
<li>Enable "'''''Load Balancing'''''"</li>
<li>Enable "'''''Solar Charging'''''"</li>
<li>If smart meter is connected with RS485 wires, press "'''''Search For Device'''''"</li>
<li>*'''ONLY If TeltoCharge is unable''' to identify energy meter - use "'''''Manual Setup'''''" </li>
[[File:Solar Settings.png|frameless|900x900px|none]]

=== Solar Settings Adjustment ===
[[File:Solar adjustment.png|Frameless|600x600px|none]]
#'''ECO+ surplus minimum''' - This setting requires the minimum value of surplus solar energy to be reached in order to initiate a charging session. If the minimum value of surplus energy is not achieved, the charger will remain in "On hold" mode, awaiting additional surplus energy. <br>
#'''ECO charging minimum''' - This setting specifies the minimum value required to commence the charging process.
<br>
<br>

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> Charging modes </h2>
<ol style="list-style-type: none; margin: 0; padding: 0;">

With TeltoCharger chargers, you can achieve three different solar charging modes, each offering unique benefits for various situations:<br>

*'''Solar only charging profile''' - In this profile, the charging process is initiated solely using green energy. The minimum required value is 6 Amps. If there is less surplus energy available than 6 A, the charger will remain in "On hold" mode.
*'''ECO+ charging profile''' - In this profile, the charging process is initiated using a combination of solar energy and grid energy. The user sets the ECO+ surplus minimum value, which determines the minimum surplus energy required to start the charging process. If the set value is less than 6A, the difference in current will be supplemented with grid power.

Example:<br>
''ECO+ surplus minimum value set to 1 A<br>
0 A (from solar) = charging process is not initiated<br>
1 A (from solar) + 5 A (from grid) = 6 A charging current<br>
5 A (from solar) + 1 A (from grid) = 6 A charging current<br>
10 A (from solar) + 0 A (from grid) = 10 A charging current
*'''ECO charging profile''' - In this profile, the charging process is initiated using maximum available solar energy in combination with grid energy. The user sets the ECO charging minimum value, which determines the minimum charging current. This charging current is first covered by the maximum solar energy available and then supplemented with grid energy.

Example:<br>
''ECO charging minimum value set to 10 A<br>
If 5 A (from solar) + 5 A (from grid) = 10 A charging current<br>
If 9 A (from solar) + 1 A (from grid) = 10 A charging current<br>
If 16 A (from solar) + 0 A (from grid) = 16 A charging current<br>
If 0 A (from solar) + 10 A (from grid) = 10 A charging current

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> Additional information </h2>
<ol style="list-style-type: none; margin: 0; padding: 0;">

There is additional information that is important to know when using solar integration, specifically regarding timers that dictate the start and stop of the charging process. <br>
<br>

If the Solar or ECO+ mode is being utilized and there is a sudden shortage of solar power to charge the electric vehicle, the charger will compensate by drawing charging power from the grid for the following 30 seconds and limiting the maximum current to 6 A until enough solar power is available. If no sufficient solar power is available after 30 seconds, the charger will transition to the "On hold" state and await the availability of additional surplus energy. Once there is sufficient surplus energy, the charger initiates a 2-minute timer during which it verifies the sustained presence of enough solar energy. After the 2-minute interval elapses, the charger proceeds to the charging process. <br>
<br>

This mechanism ensures that the charging process is flexible and responsive to variations in solar energy availability. By incorporating timers and checks, the charger optimizes the utilization of solar power while maintaining a reliable and efficient charging experience for electric vehicle owners.

<ul style="list-style-type: none; margin: 0; padding: 0;">

[[Category: Advanced Topics]]

Solar integration

2025-05-20T10:19:12Z

Vaidotas Seliukas: Wrap no

__TOC__
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> Physical installation </h2>
<ol style="list-style-type: none; margin: 0; padding: 0;">
*To ensure proper solar integration functionality, it is essential to begin with the correct physical installation. This involves having a smart energy meter installed in the electric circuit that possesses the necessary communication functionality and is included in our [[Smart energy meters|energy meter list]]. The meter plays a crucial role in detecting negative current flow, indicating when energy consumption is lower than solar generation, and feeding it back into the electrical grid. For effective communication, the charger must be interconnected with the meter.

*When the meter detects surplus energy, it relays this information to the charger. Based on the charger's internal configurations, it will determine whether to initiate the charging process or not. It is important to note that this process depends on the specific configurations set within the charger.<br>
<br>
'''Note:''' Solar functionality is not available for EVC131 family products yet.

[[File:Solar integration overview.png|frameless|1200x900px]]
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> SOLAR SETTINGS </h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">

Once the charger is properly connected to the electrical grid and interconnected with the energy meter, the next step is to configure the settings using the Teltonika Energy app.
<br>Below, you will find a comprehensive list of the settings that should be adjusted to achieve solar functionality.

<ol>
<li>Open '''''"User Menu"'''''</li>
<li>Open "'''''Installer Menu'''''"</li>
<li>Open "'''''Dynamic Load Balancing'''''" menu</li>
<li>Enable "'''''Load Balancing'''''"</li>
<li>Enable "'''''Solar Charging'''''"</li>
<li>If smart meter is connected with RS485 wires, press "'''''Search For Device'''''"</li>
<li>*'''ONLY If TeltoCharge is unable''' to identify energy meter - use "'''''Manual Setup'''''" </li>
[[File:Solar Settings.png|thumb|900x900px|none]]

=== Solar Settings Adjustment ===
[[File:Solar adjustment.png|thumb|600x600px|none]]
#'''ECO+ surplus minimum''' - This setting requires the minimum value of surplus solar energy to be reached in order to initiate a charging session. If the minimum value of surplus energy is not achieved, the charger will remain in "On hold" mode, awaiting additional surplus energy. <br>
#'''ECO charging minimum''' - This setting specifies the minimum value required to commence the charging process.
<br>
<br>

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> Charging modes </h2>
<ol style="list-style-type: none; margin: 0; padding: 0;">

With TeltoCharger chargers, you can achieve three different solar charging modes, each offering unique benefits for various situations:<br>

*'''Solar only charging profile''' - In this profile, the charging process is initiated solely using green energy. The minimum required value is 6 Amps. If there is less surplus energy available than 6 A, the charger will remain in "On hold" mode.
*'''ECO+ charging profile''' - In this profile, the charging process is initiated using a combination of solar energy and grid energy. The user sets the ECO+ surplus minimum value, which determines the minimum surplus energy required to start the charging process. If the set value is less than 6A, the difference in current will be supplemented with grid power.

Example:<br>
''ECO+ surplus minimum value set to 1 A<br>
0 A (from solar) = charging process is not initiated<br>
1 A (from solar) + 5 A (from grid) = 6 A charging current<br>
5 A (from solar) + 1 A (from grid) = 6 A charging current<br>
10 A (from solar) + 0 A (from grid) = 10 A charging current
*'''ECO charging profile''' - In this profile, the charging process is initiated using maximum available solar energy in combination with grid energy. The user sets the ECO charging minimum value, which determines the minimum charging current. This charging current is first covered by the maximum solar energy available and then supplemented with grid energy.

Example:<br>
''ECO charging minimum value set to 10 A<br>
If 5 A (from solar) + 5 A (from grid) = 10 A charging current<br>
If 9 A (from solar) + 1 A (from grid) = 10 A charging current<br>
If 16 A (from solar) + 0 A (from grid) = 16 A charging current<br>
If 0 A (from solar) + 10 A (from grid) = 10 A charging current

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> Additional information </h2>
<ol style="list-style-type: none; margin: 0; padding: 0;">

There is additional information that is important to know when using solar integration, specifically regarding timers that dictate the start and stop of the charging process. <br>
<br>

If the Solar or ECO+ mode is being utilized and there is a sudden shortage of solar power to charge the electric vehicle, the charger will compensate by drawing charging power from the grid for the following 30 seconds and limiting the maximum current to 6 A until enough solar power is available. If no sufficient solar power is available after 30 seconds, the charger will transition to the "On hold" state and await the availability of additional surplus energy. Once there is sufficient surplus energy, the charger initiates a 2-minute timer during which it verifies the sustained presence of enough solar energy. After the 2-minute interval elapses, the charger proceeds to the charging process. <br>
<br>

This mechanism ensures that the charging process is flexible and responsive to variations in solar energy availability. By incorporating timers and checks, the charger optimizes the utilization of solar power while maintaining a reliable and efficient charging experience for electric vehicle owners.

<ul style="list-style-type: none; margin: 0; padding: 0;">

[[Category: Advanced Topics]]

Solar integration

2025-05-20T10:00:05Z

Vaidotas Seliukas: Nuimta varnelė nuo Wrap text

__TOC__
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> Physical installation </h2>
<ol style="list-style-type: none; margin: 0; padding: 0;">
*To ensure proper solar integration functionality, it is essential to begin with the correct physical installation. This involves having a smart energy meter installed in the electric circuit that possesses the necessary communication functionality and is included in our [[Smart energy meters|energy meter list]]. The meter plays a crucial role in detecting negative current flow, indicating when energy consumption is lower than solar generation, and feeding it back into the electrical grid. For effective communication, the charger must be interconnected with the meter.

*When the meter detects surplus energy, it relays this information to the charger. Based on the charger's internal configurations, it will determine whether to initiate the charging process or not. It is important to note that this process depends on the specific configurations set within the charger.<br>
<br>
'''Note:''' Solar functionality is not available for EVC131 family products yet.

[[File:Solar integration overview.png|frameless|1200x900px]]
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> SOLAR SETTINGS </h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">

Once the charger is properly connected to the electrical grid and interconnected with the energy meter, the next step is to configure the settings using the Teltonika Energy app.
<br>Below, you will find a comprehensive list of the settings that should be adjusted to achieve solar functionality.

<ol>
<li>Open '''''"User Menu"'''''</li>
<li>Open "'''''Installer Menu'''''"</li>
<li>Open "'''''Dynamic Load Balancing'''''" menu</li>
<li>Enable "'''''Load Balancing'''''"</li>
<li>Enable "'''''Solar Charging'''''"</li>
<li>If smart meter is connected with RS485 wires, press "'''''Search For Device'''''"</li>
<li>*'''ONLY If TeltoCharge is unable''' to identify energy meter - use "'''''Manual Setup'''''" </li>
[[File:Solar Settings.png|thumb|900x900px|none]]

=== Solar EV charging ===
[[File:Solar_settings.png|right|frameless|271x271px]]
#'''ECO+ surplus minimum''' - This setting requires the minimum value of surplus solar energy to be reached in order to initiate a charging session. If the minimum value of surplus energy is not achieved, the charger will remain in "On hold" mode, awaiting additional surplus energy. <br>
#'''ECO charging minimum''' - This setting specifies the minimum value required to commence the charging process.
<br>
<br>

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> Charging modes </h2>
<ol style="list-style-type: none; margin: 0; padding: 0;">

With TeltoCharger chargers, you can achieve three different solar charging modes, each offering unique benefits for various situations:<br>

*'''Solar only charging profile''' - In this profile, the charging process is initiated solely using green energy. The minimum required value is 6 Amps. If there is less surplus energy available than 6 A, the charger will remain in "On hold" mode.
*'''ECO+ charging profile''' - In this profile, the charging process is initiated using a combination of solar energy and grid energy. The user sets the ECO+ surplus minimum value, which determines the minimum surplus energy required to start the charging process. If the set value is less than 6A, the difference in current will be supplemented with grid power.

Example:<br>
''ECO+ surplus minimum value set to 1 A<br>
0 A (from solar) = charging process is not initiated<br>
1 A (from solar) + 5 A (from grid) = 6 A charging current<br>
5 A (from solar) + 1 A (from grid) = 6 A charging current<br>
10 A (from solar) + 0 A (from grid) = 10 A charging current
*'''ECO charging profile''' - In this profile, the charging process is initiated using maximum available solar energy in combination with grid energy. The user sets the ECO charging minimum value, which determines the minimum charging current. This charging current is first covered by the maximum solar energy available and then supplemented with grid energy.

Example:<br>
''ECO charging minimum value set to 10 A<br>
If 5 A (from solar) + 5 A (from grid) = 10 A charging current<br>
If 9 A (from solar) + 1 A (from grid) = 10 A charging current<br>
If 16 A (from solar) + 0 A (from grid) = 16 A charging current<br>
If 0 A (from solar) + 10 A (from grid) = 10 A charging current

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> Additional information </h2>
<ol style="list-style-type: none; margin: 0; padding: 0;">

There is additional information that is important to know when using solar integration, specifically regarding timers that dictate the start and stop of the charging process. <br>
<br>

If the Solar or ECO+ mode is being utilized and there is a sudden shortage of solar power to charge the electric vehicle, the charger will compensate by drawing charging power from the grid for the following 30 seconds and limiting the maximum current to 6 A until enough solar power is available. If no sufficient solar power is available after 30 seconds, the charger will transition to the "On hold" state and await the availability of additional surplus energy. Once there is sufficient surplus energy, the charger initiates a 2-minute timer during which it verifies the sustained presence of enough solar energy. After the 2-minute interval elapses, the charger proceeds to the charging process. <br>
<br>

This mechanism ensures that the charging process is flexible and responsive to variations in solar energy availability. By incorporating timers and checks, the charger optimizes the utilization of solar power while maintaining a reliable and efficient charging experience for electric vehicle owners.

<ul style="list-style-type: none; margin: 0; padding: 0;">

[[Category: Advanced Topics]]

Firmware

2025-05-19T11:37:46Z

Vaidotas Seliukas:

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;">Latest firmware version download</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
Here you can find all information about '''firmware''' of TeltoCharge.
<br>
*1.6 version let you update your charger FW with only one file. You don't need to bother if it's legacy or secure FW installed in your charger:

{| class="wikitable" style="text-align: center; border: 1px solid #dddddd; font-family: arial, sans-serif; width: 60%;"
|+
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Latest FW version
| colspan="2" | '''[https://wiki.teltonika-energy.com/images/9/99/TeltoCharge-v1.14.7-bundle.zip TeltoCharge-v1.14.7]'''

|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Release date:
|'''May 19, 2025'''

|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Whats new?
|'''[https://wiki.teltonika-energy.com/images/4/40/Release_note_FW_1.14.pdf Release note]'''
|-
|}
*Here you can see all the previous firmware versions:
{| class="wikitable" style="text-align: center; border: 1px solid #dddddd; font-family: arial, sans-serif; width: 60%;"
|+
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Previous FW versions
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Legacy firmware version*
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Firmware version
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Release date
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Whats new?
|-
|1.13.9
| colspan="2" | '''[https://wiki.teltonika-energy.com/images/a/ae/TeltoCharge-v1.13.9-bundle.zip TeltoCharge-v1.13.9]'''
|September 10, 2024
|[https://wiki.teltonika-energy.com/images/5/50/Release_note_FW_1.13.pdf Release note]
|-
|1.12.8
| colspan="2" | '''[https://wiki.teltonika-energy.com/images/7/77/TeltoCharge-v1.12.8-bundle.zip TeltoCharge-v1.12.8]'''
|August 05, 2024
|[https://wiki.teltonika-energy.com/images/9/91/Release_note_FW_1.12.pdf Release note]
|-
|1.11.6
| colspan="2" | '''[https://wiki.teltonika-energy.com/images/f/f1/TeltoCharge-v1.11.6-bundle.zip TeltoCharge-v1.11.6]'''
|February 01, 2024
|[https://wiki.teltonika-energy.com/images/1/13/Release_note_FW_1.11.6.pdf Release note]
|-
|1.10.9
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/2/2a/TeltoCharge-v1.10.9-bundle.zip TeltoCharge-v1.10.9]'''
|October 23, 2023
|'''Android 14 optimization'''
|-
|1.10.7
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/2/29/TeltoCharge-v1.10.7-bundle.zip TeltoCharge-v1.10.7]'''
|October 23, 2023
|[https://wiki.teltonika-energy.com/images/e/ed/Release_note_FW_1.10.7.pdf Release note]
|-
|1.9.6
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/7/7b/TeltoCharge-v1.9.6-bundle.zip TeltoCharge-v1.9.6]'''
|September 18, 2023
|[https://wiki.teltonika-energy.com/images/9/90/Release_note_FW_1.9.5.pdf Release note]
|-
|1.9.5
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/9/91/TeltoCharge-v1.9.5-bundle.zip TeltoCharge-v1.9.5]'''
|August 31, 2023
|[https://wiki.teltonika-energy.com/images/9/90/Release_note_FW_1.9.5.pdf Release note]
|-
|1.8
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/4/43/TeltoCharge-v1.8.11-bundle.zip TeltoCharge-v1.8.11]'''
|July 3, 2023
|[https://wiki.teltonika-energy.com/images/e/ea/Release_note_FW_1.8.10.pdf Release note]
|-
|1.7
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/a/ad/TeltoCharge-v1.7.9-bundle.zip TeltoCharge-v1.7]'''
|May 22, 2023
|[https://wiki.teltonika-energy.com/images/1/1f/Release_note_FW_1.7.9.pdf Release note]
|-
|1.6.0
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/b/ba/TeltoCharge-v1.6.7-bundle.zip TeltoCharge-v1.6]'''
|Mar 1, 2023
|[https://wiki.teltonika-energy.com/images/4/4d/FW_1.6.pdf Release note]
|-

|1.5
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/d/dd/TeltoCharge-v1.5.8-bundle.zip TeltoCharge-v1.5]'''
|Dec 22, 2022
|[https://wiki.teltonika-energy.com/images/3/3d/Release_note_v1.5.pdf Release note]
|-
|1.4
|'''TeltoCharge-v1.4.3L'''
|'''TeltoCharge-v1.4.2'''

|Oct 7, 2022
|[https://wiki.teltonika-energy.com/images/b/b6/Release_note_v1.4.3L.pdf Release note]
|-
|1.3
|'''TeltoCharge-v1.3.12L'''
|'''TeltoCharge-v1.3.12'''
|Sep 28, 2022
|[https://wiki.teltonika-energy.com/images/a/a9/Release_note_v1.3.11L.pdf Release note]
|-
|1.2
|colspan="2" |'''TeltoCharge-v1.2.10'''
|Aug 8, 2022
|[https://wiki.teltonika-energy.com/images/0/02/Release_note_v1.2.10.pdf Release note]
|-
|1.1
|colspan="2" |'''TeltoCharge-v1.1.12'''
|Jun 6, 2022
|[https://wiki.teltonika-energy.com/images/2/24/Release_note_v1.1.12.pdf Release note]
|-
|1.0
|colspan="2" |'''TeltoCharge-v1.0.7'''
|Apr 25, 2022
|
|-
|Other
|colspan="2" |'''TeltoCharge-v1.0.4'''
|Apr 22, 2022
|
|}
'''Legacy firmware version* -''' TeltoCharge fw version which was used for chargers before mass production (these chargers are using same hardware, it's only related to separation). These type of chargers can only be updated to legacy FW version. '''From 1.5 version it is fixed and you won't need to keep this in mind.

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;">How to check your firmware version?</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
<br>
1. Go to Teltonika Energy app settings, scroll down and press '''Device info'''; <br>

2. Press '''Check for updates'''; <br>

3. At the top, current firmware version can be found. <br>
<br>
[[File:TeltoCharge FirmwareVersionCheck1.png|frameless|588x588px]] [[File:TeltoCharge FirmwareVersionCheck.png|frameless|588x588px]]

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;">How to update firmware automatically?</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
1. To update firmware, click on the main window bar '''Click to update''' option; <br>

2. You will be automatically transfered to '''Updates''' window . <br>

3. Choose to '''Update Firmware''' from firmware available on server. <br>

4. Do not close Teltonika Energy app and stay in bluetooth range while update ends. <br>
<br>

[[File:Fota 1.png|frameless|588x588px]] [[File:Fota 2.png|frameless|588x588px]]

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;">How to update firmware manually?</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
1. To update firmware manually, first of all, download firmware file from this page to your mobile phone which is paired with your TeltoCharge; <br>

2. Go to Teltonika Energy app settings, scroll down and press device info, then press Check for updates; <br>

3. Browse file and select latest firmware version which was downloaded; <br>

4. Press Upload firmware; <br>

5. Do not close Teltonika Energy app and stay in bluetooth range while update ends; <br>
<br>

[[File:Updates2.png|frameless|588x588px]] [[File:Updates3.png|frameless|588x588px]] [[File:Updates4.png|frameless|588x588px]]

[[Category: Resources]]

File:TeltoCharge-v1.14.7-bundle.zip

2025-05-19T11:34:26Z

Vaidotas Seliukas: EVC1 FW v1.14 hot-fix v1.14.7

== Summary ==
EVC1 FW v1.14 hot-fix v1.14.7

Basic FAQ

2025-05-14T07:49:43Z

Vaidotas Seliukas:

{| class="wikitable"
|No.
|'''Questions'''
|'''Answers'''
|-
|1.
|Where can I find installer code?
|Installer code can be found on the sticker on the Teltocharge mid plate.
|-
|2.
|The charging speed is not as expected
|Charging speed depends on input voltage and current. The higher input voltage/current the higher charging power will be. Different elctric vehicles have different charging power acceptance. If charger is capable to charge at maximum 11 kW power and for example user have Nissan Leaf 2018 which has 6.6 kW maximum power acceptance. The maximum charging power can be only 6.6 kW.
|-
|3.
|Can the charger measure the energy consumption of the charging?
|Yes, charger has got built-in energy metering circuit which measures energy consumption and delivers DATA to TeltoCharge application.
|-
|4.
|I have two different EV models, can I charge both cars with the TeltoCharge charger?
|TeltoCharge can be used to charge different EV models. Different EV models can have different type of charging sockets. User have to have suitable cable, or suitable plug to charge EV with different than Type 2 connector.
|-
|5.
|Can I use my own charging cable?
|User have possibility to use his own charging cable. Untethered TeltoCharge charger have type 2 socket, which is used to connect charging cable.
|-
|6.
|Can I install TeltoCharge by myself?
|Installation of the charger must be done only by the personnel with relevant qualifications under the applicable local regulations.
|-
|7.
|Can I install charger on the pole?
|It is possible to install product on the pole given that it provides correct mounting bracket. We do not provide special mounting bracket for the pole, however we have mounting pole as a possible accessory in our portfolio. Please refer to your sales manager.
|-
|8.
|Is built-in energy meter MID certified?
|Built-in energy meter is not mid certified.
|-
|9.
|What is the purpose of the Interface board battery?
|Integrated CR1220 battery is responsible for keeping the clock memory.
|}

General Specifications

2025-04-24T09:53:16Z

Vaidotas Seliukas:

=General specifications=
A specification often refers to a set of documented requirements to be satisfied by a material, design, product, or service. A specification is often a type of technical standard.
<br>
{| class="wikitable" style="text-align: center; border: 1px solid #414042; font-family: arial, sans-serif; width: 100%;"
! style="background-color: #0054A6; color:#F1F2F4; padding: 8px; font-size: 25px;" | Parameter
! style="background-color: #0054A6; color:#F1F2F4; padding: 8px; font-size: 25px;" | Definition
|-
| Dimensions without cable || 170x341x97 mm
|-
| Weight without cable || 2,8 kg
|-
| Operating temperature || -30°C - +50°C
|-
| Storage temperature || -30°C - +60°C
|-
| IP rating || IP56
|-
| IK rating || IK10
|-
| Certification || CE
|-
| Standards || 2014/35/EU, 2014/30/EU
IEC 61851-1, IEC 61851-21
|}
[[Category: General information]]

Firmware

2025-04-22T07:13:10Z

Vaidotas Seliukas:

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;">Latest firmware version download</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
Here you can find all information about '''firmware''' of TeltoCharge.
<br>
*1.6 version let you update your charger FW with only one file. You don't need to bother if it's legacy or secure FW installed in your charger:

{| class="wikitable" style="text-align: center; border: 1px solid #dddddd; font-family: arial, sans-serif; width: 60%;"
|+
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Latest FW version
| colspan="2" | '''[https://wiki.teltonika-energy.com/images/6/6b/TeltoCharge-v1.14.5-bundle.zip TeltoCharge-v1.14.5]'''

|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Release date:
|'''April 22, 2025'''

|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Whats new?
|'''[https://wiki.teltonika-energy.com/images/4/40/Release_note_FW_1.14.pdf Release note]'''
|-
|}
*Here you can see all the previous firmware versions:
{| class="wikitable" style="text-align: center; border: 1px solid #dddddd; font-family: arial, sans-serif; width: 60%;"
|+
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Previous FW versions
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Legacy firmware version*
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Firmware version
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Release date
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Whats new?
|-
|1.13.9
| colspan="2" | '''[https://wiki.teltonika-energy.com/images/a/ae/TeltoCharge-v1.13.9-bundle.zip TeltoCharge-v1.13.9]'''
|September 10, 2024
|[https://wiki.teltonika-energy.com/images/5/50/Release_note_FW_1.13.pdf Release note]
|-
|1.12.8
| colspan="2" | '''[https://wiki.teltonika-energy.com/images/7/77/TeltoCharge-v1.12.8-bundle.zip TeltoCharge-v1.12.8]'''
|August 05, 2024
|[https://wiki.teltonika-energy.com/images/9/91/Release_note_FW_1.12.pdf Release note]
|-
|1.11.6
| colspan="2" | '''[https://wiki.teltonika-energy.com/images/f/f1/TeltoCharge-v1.11.6-bundle.zip TeltoCharge-v1.11.6]'''
|February 01, 2024
|[https://wiki.teltonika-energy.com/images/1/13/Release_note_FW_1.11.6.pdf Release note]
|-
|1.10.9
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/2/2a/TeltoCharge-v1.10.9-bundle.zip TeltoCharge-v1.10.9]'''
|October 23, 2023
|'''Android 14 optimization'''
|-
|1.10.7
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/2/29/TeltoCharge-v1.10.7-bundle.zip TeltoCharge-v1.10.7]'''
|October 23, 2023
|[https://wiki.teltonika-energy.com/images/e/ed/Release_note_FW_1.10.7.pdf Release note]
|-
|1.9.6
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/7/7b/TeltoCharge-v1.9.6-bundle.zip TeltoCharge-v1.9.6]'''
|September 18, 2023
|[https://wiki.teltonika-energy.com/images/9/90/Release_note_FW_1.9.5.pdf Release note]
|-
|1.9.5
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/9/91/TeltoCharge-v1.9.5-bundle.zip TeltoCharge-v1.9.5]'''
|August 31, 2023
|[https://wiki.teltonika-energy.com/images/9/90/Release_note_FW_1.9.5.pdf Release note]
|-
|1.8
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/4/43/TeltoCharge-v1.8.11-bundle.zip TeltoCharge-v1.8.11]'''
|July 3, 2023
|[https://wiki.teltonika-energy.com/images/e/ea/Release_note_FW_1.8.10.pdf Release note]
|-
|1.7
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/a/ad/TeltoCharge-v1.7.9-bundle.zip TeltoCharge-v1.7]'''
|May 22, 2023
|[https://wiki.teltonika-energy.com/images/1/1f/Release_note_FW_1.7.9.pdf Release note]
|-
|1.6.0
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/b/ba/TeltoCharge-v1.6.7-bundle.zip TeltoCharge-v1.6]'''
|Mar 1, 2023
|[https://wiki.teltonika-energy.com/images/4/4d/FW_1.6.pdf Release note]
|-

|1.5
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/d/dd/TeltoCharge-v1.5.8-bundle.zip TeltoCharge-v1.5]'''
|Dec 22, 2022
|[https://wiki.teltonika-energy.com/images/3/3d/Release_note_v1.5.pdf Release note]
|-
|1.4
|'''TeltoCharge-v1.4.3L'''
|'''TeltoCharge-v1.4.2'''

|Oct 7, 2022
|[https://wiki.teltonika-energy.com/images/b/b6/Release_note_v1.4.3L.pdf Release note]
|-
|1.3
|'''TeltoCharge-v1.3.12L'''
|'''TeltoCharge-v1.3.12'''
|Sep 28, 2022
|[https://wiki.teltonika-energy.com/images/a/a9/Release_note_v1.3.11L.pdf Release note]
|-
|1.2
|colspan="2" |'''TeltoCharge-v1.2.10'''
|Aug 8, 2022
|[https://wiki.teltonika-energy.com/images/0/02/Release_note_v1.2.10.pdf Release note]
|-
|1.1
|colspan="2" |'''TeltoCharge-v1.1.12'''
|Jun 6, 2022
|[https://wiki.teltonika-energy.com/images/2/24/Release_note_v1.1.12.pdf Release note]
|-
|1.0
|colspan="2" |'''TeltoCharge-v1.0.7'''
|Apr 25, 2022
|
|-
|Other
|colspan="2" |'''TeltoCharge-v1.0.4'''
|Apr 22, 2022
|
|}
'''Legacy firmware version* -''' TeltoCharge fw version which was used for chargers before mass production (these chargers are using same hardware, it's only related to separation). These type of chargers can only be updated to legacy FW version. '''From 1.5 version it is fixed and you won't need to keep this in mind.

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;">How to check your firmware version?</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
<br>
1. Go to Teltonika Energy app settings, scroll down and press '''Device info'''; <br>

2. Press '''Check for updates'''; <br>

3. At the top, current firmware version can be found. <br>
<br>
[[File:TeltoCharge FirmwareVersionCheck1.png|frameless|588x588px]] [[File:TeltoCharge FirmwareVersionCheck.png|frameless|588x588px]]

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;">How to update firmware automatically?</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
1. To update firmware, click on the main window bar '''Click to update''' option; <br>

2. You will be automatically transfered to '''Updates''' window . <br>

3. Choose to '''Update Firmware''' from firmware available on server. <br>

4. Do not close Teltonika Energy app and stay in bluetooth range while update ends. <br>
<br>

[[File:Fota 1.png|frameless|588x588px]] [[File:Fota 2.png|frameless|588x588px]]

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;">How to update firmware manually?</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
1. To update firmware manually, first of all, download firmware file from this page to your mobile phone which is paired with your TeltoCharge; <br>

2. Go to Teltonika Energy app settings, scroll down and press device info, then press Check for updates; <br>

3. Browse file and select latest firmware version which was downloaded; <br>

4. Press Upload firmware; <br>

5. Do not close Teltonika Energy app and stay in bluetooth range while update ends; <br>
<br>

[[File:Updates2.png|frameless|588x588px]] [[File:Updates3.png|frameless|588x588px]] [[File:Updates4.png|frameless|588x588px]]

[[Category: Resources]]

Firmware

2025-04-22T06:56:50Z

Vaidotas Seliukas:

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;">Latest firmware version download</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
Here you can find all information about '''firmware''' of TeltoCharge.
<br>
*1.6 version let you update your charger FW with only one file. You don't need to bother if it's legacy or secure FW installed in your charger:

{| class="wikitable" style="text-align: center; border: 1px solid #dddddd; font-family: arial, sans-serif; width: 60%;"
|+
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Latest FW version
| colspan="2" | '''[https://wiki.teltonika-energy.com/images/6/6b/TeltoCharge-v1.14.5-bundle.zip TeltoCharge-v1.14.5]'''

|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Release date:
|'''September 10, 2024'''

|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Whats new?
|'''[https://wiki.teltonika-energy.com/images/4/40/Release_note_FW_1.14.pdf Release note]'''
|-
|}
*Here you can see all the previous firmware versions:
{| class="wikitable" style="text-align: center; border: 1px solid #dddddd; font-family: arial, sans-serif; width: 60%;"
|+
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Previous FW versions
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Legacy firmware version*
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Firmware version
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Release date
|style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Whats new?
|-
|1.13.9
| colspan="2" | '''[https://wiki.teltonika-energy.com/images/a/ae/TeltoCharge-v1.13.9-bundle.zip TeltoCharge-v1.13.9]'''
|September 10, 2024
|[https://wiki.teltonika-energy.com/images/5/50/Release_note_FW_1.13.pdf Release note]
|-
|1.12.8
| colspan="2" | '''[https://wiki.teltonika-energy.com/images/7/77/TeltoCharge-v1.12.8-bundle.zip TeltoCharge-v1.12.8]'''
|August 05, 2024
|[https://wiki.teltonika-energy.com/images/9/91/Release_note_FW_1.12.pdf Release note]
|-
|1.11.6
| colspan="2" | '''[https://wiki.teltonika-energy.com/images/f/f1/TeltoCharge-v1.11.6-bundle.zip TeltoCharge-v1.11.6]'''
|February 01, 2024
|[https://wiki.teltonika-energy.com/images/1/13/Release_note_FW_1.11.6.pdf Release note]
|-
|1.10.9
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/2/2a/TeltoCharge-v1.10.9-bundle.zip TeltoCharge-v1.10.9]'''
|October 23, 2023
|'''Android 14 optimization'''
|-
|1.10.7
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/2/29/TeltoCharge-v1.10.7-bundle.zip TeltoCharge-v1.10.7]'''
|October 23, 2023
|[https://wiki.teltonika-energy.com/images/e/ed/Release_note_FW_1.10.7.pdf Release note]
|-
|1.9.6
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/7/7b/TeltoCharge-v1.9.6-bundle.zip TeltoCharge-v1.9.6]'''
|September 18, 2023
|[https://wiki.teltonika-energy.com/images/9/90/Release_note_FW_1.9.5.pdf Release note]
|-
|1.9.5
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/9/91/TeltoCharge-v1.9.5-bundle.zip TeltoCharge-v1.9.5]'''
|August 31, 2023
|[https://wiki.teltonika-energy.com/images/9/90/Release_note_FW_1.9.5.pdf Release note]
|-
|1.8
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/4/43/TeltoCharge-v1.8.11-bundle.zip TeltoCharge-v1.8.11]'''
|July 3, 2023
|[https://wiki.teltonika-energy.com/images/e/ea/Release_note_FW_1.8.10.pdf Release note]
|-
|1.7
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/a/ad/TeltoCharge-v1.7.9-bundle.zip TeltoCharge-v1.7]'''
|May 22, 2023
|[https://wiki.teltonika-energy.com/images/1/1f/Release_note_FW_1.7.9.pdf Release note]
|-
|1.6.0
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/b/ba/TeltoCharge-v1.6.7-bundle.zip TeltoCharge-v1.6]'''
|Mar 1, 2023
|[https://wiki.teltonika-energy.com/images/4/4d/FW_1.6.pdf Release note]
|-

|1.5
|div style="text-align: center;" colspan="2" | '''[https://wiki.teltonika-energy.com/images/d/dd/TeltoCharge-v1.5.8-bundle.zip TeltoCharge-v1.5]'''
|Dec 22, 2022
|[https://wiki.teltonika-energy.com/images/3/3d/Release_note_v1.5.pdf Release note]
|-
|1.4
|'''TeltoCharge-v1.4.3L'''
|'''TeltoCharge-v1.4.2'''

|Oct 7, 2022
|[https://wiki.teltonika-energy.com/images/b/b6/Release_note_v1.4.3L.pdf Release note]
|-
|1.3
|'''TeltoCharge-v1.3.12L'''
|'''TeltoCharge-v1.3.12'''
|Sep 28, 2022
|[https://wiki.teltonika-energy.com/images/a/a9/Release_note_v1.3.11L.pdf Release note]
|-
|1.2
|colspan="2" |'''TeltoCharge-v1.2.10'''
|Aug 8, 2022
|[https://wiki.teltonika-energy.com/images/0/02/Release_note_v1.2.10.pdf Release note]
|-
|1.1
|colspan="2" |'''TeltoCharge-v1.1.12'''
|Jun 6, 2022
|[https://wiki.teltonika-energy.com/images/2/24/Release_note_v1.1.12.pdf Release note]
|-
|1.0
|colspan="2" |'''TeltoCharge-v1.0.7'''
|Apr 25, 2022
|
|-
|Other
|colspan="2" |'''TeltoCharge-v1.0.4'''
|Apr 22, 2022
|
|}
'''Legacy firmware version* -''' TeltoCharge fw version which was used for chargers before mass production (these chargers are using same hardware, it's only related to separation). These type of chargers can only be updated to legacy FW version. '''From 1.5 version it is fixed and you won't need to keep this in mind.

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;">How to check your firmware version?</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
<br>
1. Go to Teltonika Energy app settings, scroll down and press '''Device info'''; <br>

2. Press '''Check for updates'''; <br>

3. At the top, current firmware version can be found. <br>
<br>
[[File:TeltoCharge FirmwareVersionCheck1.png|frameless|588x588px]] [[File:TeltoCharge FirmwareVersionCheck.png|frameless|588x588px]]

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;">How to update firmware automatically?</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
1. To update firmware, click on the main window bar '''Click to update''' option; <br>

2. You will be automatically transfered to '''Updates''' window . <br>

3. Choose to '''Update Firmware''' from firmware available on server. <br>

4. Do not close Teltonika Energy app and stay in bluetooth range while update ends. <br>
<br>

[[File:Fota 1.png|frameless|588x588px]] [[File:Fota 2.png|frameless|588x588px]]

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;">How to update firmware manually?</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
1. To update firmware manually, first of all, download firmware file from this page to your mobile phone which is paired with your TeltoCharge; <br>

2. Go to Teltonika Energy app settings, scroll down and press device info, then press Check for updates; <br>

3. Browse file and select latest firmware version which was downloaded; <br>

4. Press Upload firmware; <br>

5. Do not close Teltonika Energy app and stay in bluetooth range while update ends; <br>
<br>

[[File:Updates2.png|frameless|588x588px]] [[File:Updates3.png|frameless|588x588px]] [[File:Updates4.png|frameless|588x588px]]

[[Category: Resources]]

File:Release note FW 1.14.pdf

2025-04-22T06:56:15Z

Vaidotas Seliukas: EVC1 FW 1.14.5 Release note

== Summary ==
EVC1 FW 1.14.5 Release note

File:TeltoCharge-v1.14.5-bundle.zip

2025-04-22T06:49:39Z

Vaidotas Seliukas: EVC1 serijos FW v.1.14.5

== Summary ==
EVC1 serijos FW v.1.14.5

Electrical Specifications EVC2

2025-02-21T12:52:47Z

Vaidotas Seliukas:

=EVC2 Eletrical Speficications=

EVC2 have different product configurations, which can be customizable to suit user needs.

{| class="wikitable" style="text-align: center; border: 1px solid #dddddd; font-family: arial, sans-serif; width: 60%;"
! colspan="4"; style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |AC INPUT SPECIFICATIONS
|-
|
|'''EVC20X0 7,4 kW'''
|'''EVC20X1 11 kW'''
|'''EVC20X2 22 kW'''
|-
|Input AC power connection
|1 phase
|1 or 3 phases
|1 or 3 phases
|-
|Maximum current per phase
|32 A
|16 A
|32 A
|-
|Max power on single phase
|7.4 kW
|'''3.7 kW'''
|7.4 kW
|-
|Max power on three phase
|N/A
|11 kW
|22 kW
|-
| rowspan="2" |Input voltage
| rowspan="2" |(L-N) 230 ± 10% VAC
| colspan="2" |3 phase: (L-L) 400 ± 10% VAC
(L-N) 230 ± 10% VAC
|-
| colspan="2" |1 phase: (L-N) 230 ± 10% VAC
|-
|Rated frequency
| colspan="3" |50 / 60 HZ
|-
|Standby power consumption
| colspan="3" |3 W
|-
|RCD-DD
| colspan="3" |6 mA DC
|-
|Overvoltage category
| colspan="3" |CAT III
|-
|Protection against electric shock
| colspan="3" |Class I
|-
! colspan="4" style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |AC Output specifications
|-
| rowspan="2" |AC output voltage range
| rowspan="2" |(L-N) 230 ± 10% VAC
| colspan="2" |3 phase: (L-L) 400 ± 10% VAC
(L-N) 230 ± 10% VAC
|-
| colspan="2" |1 phase: (L-N) 230 ± 10% VAC
|-
|Connection Standart
| colspan="3" |Type 2 cable
Type 2 socket

T2S socket
|-
! colspan="4" style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |'''Power Cable'''
|-
|Maximum cable diameter
| colspan="3" |25 mm
|-
|Maximum wire cross section
| colspan="3" |10 mm<sup>2</sup>
|}

[[Category: General information]]

Quick user guide of mobile application

2025-02-21T05:09:38Z

Vaidotas Seliukas: Protected "Quick user guide of mobile application" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))

<li>[[Media:Teltonika QUG Updated.V.13.9.pdf|Quick user guide of mobile application]]</li>
<li>[[User guide for mobile application - Translated|User guide for mobile application - Translated]]</li>

EVC1 preventive maintenance

2025-02-03T08:56:53Z

Vaidotas Seliukas: Added abstract maintenance text

Preventive maintenance for outdoor EV chargers includes regular cleaning, inspections, and software updates. The goal is to keep the charger in good working order and protect users and equipment.

_____________________________________________________________________________________________________________________________________

=== Cleaning ===

* '''Remove dust''': Dust can reduce the charger's efficiency and performance.
* '''Clean the charging port''': A clean charging port prevents damage and ensures safe and efficient charging.

=== Inspections ===

* '''Check for damage''': Look for frayed wires, corrosion, or debris buildup.

* '''Check for overheating''': Hot temperatures can cause exposed wiring and overheating, which can be dangerous.

* '''Check for loose connections''': Loose connections can impact performance.

* '''Check the charging port''': Ensure it's clean and free of obstructions.

=== Software updates ===

* '''Check for updates''': Regularly check for firmware or software updates from the manufacturer.
* '''Install updates''': Install updates promptly to optimize performance and introduce new features.
* '''Test after updates''': Test the system after updates to ensure there are no disruptions.

TeltoCharge

2025-02-03T08:54:39Z

Vaidotas Seliukas:

<big><ul>
<div style="font-family: Arial, sans-serif; margin: 20px auto; max-width: 1000px;">
<h1 style="color: #4a4a4a; font-size: 36px; font-weight: bold; text-align: center;"> [[file:Product TC2.png||alt=|frameless|300x200px|thumb|left|upright=0.5]] [[file:Product TC3.png||alt=|frameless|350x200px|thumb|right|upright=1]]
<br> Teltonika TeltoCharge Wiki <br> </h1> <h1 style="color: #4a4a4a; font-size: 30px; font-weight: bold; text-align: center;"> Global product line </h1>

__NOTOC__
<div style="background-color: #f2f2f2; padding: 20px;">
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[General information]]</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
<ul>
<li>[[General Specifications|General Specifications]]</li>
<li>[[Electrical Specifications|Electrical Specifications]]</li>
<li>[[Datasheet|Datasheet]]</li>
<li>[[Warranty|Warranty]]</li>
<li>[[Compliance documentation|Compliance documentation]]
</ul>

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[Getting Started]]</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
<ul>
<li>[[First start|First start Guide]]</li>
<li>[[Installation process|Physical installation process]]</li>
→ [[RCD - residual current device| RCD installation]] <br>
→ [[SPD - surge protection device| SPD installation]] <br>
<li>[[Media:TeltoCharge_Installation_Manual.pdf|Installation manual]]</li>
<li>[[Quick user guide of mobile application|Quick user guide of mobile application]]</li>
<li>[[Media:TeltoCharge_Test_Plan_Global_V6.0.pdf|Test plan]]</li>
</ul>

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[Product guides]]</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
<ul>
<li>[[7.4 kW charger|Product Guide of 7.4 kW TeltoCharge]]</li>
<li>[[11 kW charger|Product Guide of 11 kW TeltoCharge]]</li>
<li>[[22 kW charger|Product Guide of 22 kW TeltoCharge]]</li>
<li>[[Functionalities|Functionalities]]</li>
<li>[[Troubleshooting Guide|Troubleshooting Guide]]</li>
<li>[[TeltoCharge product codes|Product numbers - what to order?]]</li>
</ul>

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[Advanced Topics]]</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
<ul style="list-style-type: none; margin: 0; padding: 0;">
<ul>
<li>[[OCPP 1.6 JSON guide|Connecting TeltoCharge via OCPP 1.6 JSON Guide]]</li>
→ [[Compatible Software Providers for OCPP Integration|Compatible Software Providers for OCPP Integration]]<br>
<li>[[Dynamic Load Balancing|Dynamic load balancing]]</li>
<li>[[Dynamic Load Management|Dynamic load management]]</li>
→[[Smart energy meters|Supported Smart Energy meters]]<br>
→[[P1 Modbus Dongle]]<br>
→[[Integration of TeltoCharge with GoodWe Inverters ]]<br>
<li>[[Solar integration|Solar integration]]</li>
<li>[[Installation manual of Mounting Pole|Accessories]]</li>
</ul>

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[Resources]]</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
<ul>
<li>[[Firmware|Firmware]]</li>
<li>[[FAQ|FAQ]]</li>
<li>[[Partner content|Partner content]]</li>
<li>[[Support|Support forum]]</li>
<li>[[Sample products information|Sample products information]]</li>
<li>[[EVC1 preventive maintenance|Preventive maintenance]]</li>
</ul>
</ul>
</big>

[[Category: Main Page]]

TeltoCharge

2025-02-03T08:53:41Z

Vaidotas Seliukas:

File:SDoC v1.2.png

2025-01-17T09:14:55Z

Vaidotas Seliukas: Vaidotas Seliukas uploaded a new version of File:SDoC v1.2.png

== Summary ==
Thumbnail for SDoC EVC1 with naked version codes

Declarations of conformity

2025-01-17T09:11:54Z

Vaidotas Seliukas: /* ACMA SDoC v1.2 */

= Declarations for EVC100-EVC121 products group =
<center> Here are uploaded newest Declaration of conformity versions for available products. <br> <center>
'''Note:''' Thumbnails might differ from main document contents.

== EVC10X series declarations ==
[[File: DoC EVC10X Teltocharge Signed.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/9/9e/Teltocharge_DoC_EVC10X_Signed.pdf|thumb]]

== EVC11X series declarations ==
[[File: DoC EVC11X Teltocharge Signed.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/4/4b/Teltocharge_DoC_EVC11X_Signed.pdf|thumb]]

== EVC12X series declarations ==
[[File: DoC EVC12X Teltocharge Signed.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/d/d8/Teltocharge_DoC_EVC12X_Signed.pdf|thumb]]

== Common AS/NZS declaration ==
[[File:DoC AS NZS Teltocharge Signed.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/a/af/Teltocharge_DoC_AS-NZS_Signed.pdf|thumb]]

== ACMA SDoC ==
[[File:SDoC ACMA Teltocharge Signed.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/5/5d/Suppliers_Declaration_of_Conformity_EVC1-C-D-E-F-G-000.pdf|thumb]]

== ACMA SDoC v1.2 ==
[[File:SDoC v1.2.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/f/f9/Suppliers_Declaration_of_Conformity_EVC1-C-D-E-F-G-000_V1.2_.pdf|thumb]]

= Declarations for EVC16 products group =
Here are uploaded newest Declaration of conformity versions for available products. <br>
'''Note:''' Thumbnails might differ from main document contents.
<center>
== EVC162X-163X series declarations ==
[[File: EVC16 DOC Thumbnail.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/6/65/EVC16X_UKCA_DECLARATION_OF_CONFORMITY_7kW_Teltonika_Energy.pdf|thumb]]

== EVC164X-165X series declarations ==
[[File: EVC16 DOC Thumbnail.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/0/0d/EVC16X_CE_DECLARATION_OF_CONFORMITY_7kW_Teltonika_Energy.pdf|thumb]]

= Disclaimer =
''Test reports and certificates of our product can be provided upon request. The recipients will be asked to sign a non-disclosure agreement (NDA).''

[[Category: Compliance documentation]]

Declarations of conformity

2025-01-17T09:11:14Z

Vaidotas Seliukas: /* ACMA SDoC v1.2 */

= Declarations for EVC100-EVC121 products group =
<center> Here are uploaded newest Declaration of conformity versions for available products. <br> <center>
'''Note:''' Thumbnails might differ from main document contents.

== EVC10X series declarations ==
[[File: DoC EVC10X Teltocharge Signed.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/9/9e/Teltocharge_DoC_EVC10X_Signed.pdf|thumb]]

== EVC11X series declarations ==
[[File: DoC EVC11X Teltocharge Signed.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/4/4b/Teltocharge_DoC_EVC11X_Signed.pdf|thumb]]

== EVC12X series declarations ==
[[File: DoC EVC12X Teltocharge Signed.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/d/d8/Teltocharge_DoC_EVC12X_Signed.pdf|thumb]]

== Common AS/NZS declaration ==
[[File:DoC AS NZS Teltocharge Signed.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/a/af/Teltocharge_DoC_AS-NZS_Signed.pdf|thumb]]

== ACMA SDoC ==
[[File:SDoC ACMA Teltocharge Signed.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/5/5d/Suppliers_Declaration_of_Conformity_EVC1-C-D-E-F-G-000.pdf|thumb]]

== ACMA SDoC v1.2 ==
[[File:SDoC v1.2.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/1/11/Suppliers_Declaration_of_Conformity_EVC1-C-D-E-F-G-000_V1.2_.pdf|thumb]]

= Declarations for EVC16 products group =
Here are uploaded newest Declaration of conformity versions for available products. <br>
'''Note:''' Thumbnails might differ from main document contents.
<center>
== EVC162X-163X series declarations ==
[[File: EVC16 DOC Thumbnail.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/6/65/EVC16X_UKCA_DECLARATION_OF_CONFORMITY_7kW_Teltonika_Energy.pdf|thumb]]

== EVC164X-165X series declarations ==
[[File: EVC16 DOC Thumbnail.png|alt=|center|407x407px|link=https://wiki.teltonika-energy.com/images/0/0d/EVC16X_CE_DECLARATION_OF_CONFORMITY_7kW_Teltonika_Energy.pdf|thumb]]

= Disclaimer =
''Test reports and certificates of our product can be provided upon request. The recipients will be asked to sign a non-disclosure agreement (NDA).''

[[Category: Compliance documentation]]

File:Suppliers Declaration of Conformity EVC1-C-D-E-F-G-000 V1.2 .pdf

2025-01-17T09:10:27Z

Vaidotas Seliukas: EVC1 naked versions RCM SDoC

== Summary ==
EVC1 naked versions RCM SDoC

Installation FAQ

2024-12-19T08:48:15Z

Vaidotas Seliukas:

{| class="wikitable"
|No.
|'''Question'''
|'''Answer'''
|-
|1.
|What is the maximum input power cable diameter?
|Maximum input cable diameter is 17,5 mm. It is limited by the gland which compress cable.[[File:TeltoCharge Maximum Cable Diameter.png|center|frameless|221x221px]]
|-
|2.
|What is the maximum input power wire area?
|Maximum input power wire area is 7.5 mm<sup>2</sup>. It is limited by the terminal.[[File:TeltoCharge maximum Wire Area.png|center|frameless]]
|-
|3.
|Is Earth wire mandatory?
|Earth wire is mandatory and device will not power on without it.
Product does not support IT electrical network and grids that uses floating earth.
|}

Installation FAQ

2024-12-19T08:46:44Z

Vaidotas Seliukas:

TeltoCharge2

2024-10-28T07:18:49Z

Vaidotas Seliukas: Created page with "<big><ul> <div style="font-family: Arial, sans-serif; margin: 20px auto; max-width: 1000px;"> <h1 style="color: #4a4a4a; font-size: 36px; font-weight: bold; text-align: center..."

<big><ul>
<div style="font-family: Arial, sans-serif; margin: 20px auto; max-width: 1000px;">
<h1 style="color: #4a4a4a; font-size: 36px; font-weight: bold; text-align: center;"> [[file:Product TC2.png||alt=|frameless|300x200px|thumb|left|upright=0.5]] [[file:Product TC3.png||alt=|frameless|350x200px|thumb|right|upright=1]]
<br> Teltonika TeltoCharge Wiki <br> </h1> <h1 style="color: #4a4a4a; font-size: 30px; font-weight: bold; text-align: center;"> Global product line </h1>

__NOTOC__
<div style="background-color: #f2f2f2; padding: 20px;">
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[General information]]</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
<ul>
<li>[[General Specifications|General Specifications]]</li>
<li>[[Electrical Specifications|Electrical Specifications]]</li>
<li>[[Datasheet|Datasheet]]</li>
<li>[[Warranty|Warranty]]</li>
<li>[[Compliance documentation|Compliance documentation]]
</ul>

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[Getting Started]]</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
<ul>
<li>[[First start|First start Guide]]</li>
<li>[[Installation process|Physical installation process]]</li>
→ [[RCD - residual current device| RCD installation]] <br>
→ [[SPD - surge protection device| SPD installation]] <br>
<li>[[Media:TeltoCharge_Installation_Manual.pdf|Installation manual]]</li>
<li>[[Quick user guide of mobile application|Quick user guide of mobile application]]</li>
<li>[[Media:TeltoCharge_Test_Plan_Global_V6.0.pdf|Test plan]]</li>
</ul>

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[Product guides]]</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
<ul>
<li>[[7.4 kW charger|Product Guide of 7.4 kW TeltoCharge]]</li>
<li>[[11 kW charger|Product Guide of 11 kW TeltoCharge]]</li>
<li>[[22 kW charger|Product Guide of 22 kW TeltoCharge]]</li>
<li>[[Functionalities|Functionalities]]</li>
<li>[[Troubleshooting Guide|Troubleshooting Guide]]</li>
<li>[[TeltoCharge product codes|Product numbers - what to order?]]</li>
</ul>

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[Advanced Topics]]</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
<ul style="list-style-type: none; margin: 0; padding: 0;">
<ul>
<li>[[OCPP 1.6 JSON guide|Connecting TeltoCharge via OCPP 1.6 JSON Guide]]</li>
→ [[Compatible Software Providers for OCPP Integration|Compatible Software Providers for OCPP Integration]]<br>
<li>[[Dynamic Load Balancing|Dynamic load balancing]]</li>
<li>[[Dynamic Load Management|Dynamic load management]]</li>
→[[Smart energy meters|Supported Smart Energy meters]]<br>
→[[Smart Stuff]]<br>
→[[Integration of TeltoCharge with GoodWe Inverters ]]<br>
<li>[[Solar integration|Solar integration]]</li>
<li>[[Installation manual of Mounting Pole|Accessories]]</li>
</ul>

<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[Resources]]</h2>
<ul style="list-style-type: none; margin: 0; padding: 0;">
<ul>
<li>[[Firmware|Firmware]]</li>
<li>[[FAQ|FAQ]]</li>
<li>[[Partner content|Partner content]]</li>
<li>[[Support|Support forum]]</li>
<li>[[Sample products information|Sample products information]]</li>

</ul>
</ul>
</big>

[[Category: Main Page]]

File:TeltoCharge Datasheet EVC16 Global 24.09.16.pdf

2024-09-26T04:40:36Z

Vaidotas Seliukas: Vaidotas Seliukas uploaded a new version of File:TeltoCharge Datasheet EVC16 Global 24.09.16.pdf

== Summary ==
Datasheet for EVC16 4/5 series product