https://wiki.teltonika-energy.com/api.php?action=feedcontributions&feedformat=atom&user=KarolisS
Teltonika Energy Wiki - User contributions [en]
2026-06-04T06:41:27Z
User contributions
MediaWiki 1.43.5
https://wiki.teltonika-energy.com/index.php?title=EMS_configuration_EVC2&diff=5497
EMS configuration EVC2
2026-06-03T08:51:49Z
<p>KarolisS: Created page with "== EMS CONFIGURATION == This section provides an overview of the Modbus RTU and TCP interface supported by EVC2. The document provides description of the available Modbus registers for the external control and communication with the charge. This functionality is only available when the charger is configured as a secondary (server) device and waits for acceptable commands from the primary (client) device. Interface allows EVC2 to be controlled via another device over th..."</p>
<hr />
<div>== EMS CONFIGURATION ==<br />
This section provides an overview of the Modbus RTU and TCP interface supported by EVC2.<br />
<br />
The document provides description of the available Modbus registers for the external control and communication with the charge. This functionality is only available when the charger is configured as a secondary (server) device and waits for acceptable commands from the primary (client) device.<br />
<br />
Interface allows EVC2 to be controlled via another device over the registers. For example a server might be calculating current electricity price and in so can be limiting or increasing the charging rate of the EVC2 dynamically by modifying its settings on the fly via the provided commands.<br />
<br />
=== Device preparation for Modbus RTU ===<br />
EVC2 must be configured as a secondary device via our mobile application and device must have RS485 wired connection with the primary device..<br />
<br />
# Open "User menu"<br />
# Open "Installer menu"<br />
# Open "Load Management"<br />
# Select "Modbus RTU"<br />
# Select "Secondary"<br />
# Enable secondary device<br />
<br />
Check if the address is expected in your system<br />
<br />
[[File:EMS Modbus RTU secondary device.png|frameless|985x985px]]<br />
<br />
<br />
Connection terminals are marked as '''LM''' <br />
<br />
[[File:EVC2_external_controller.png|frameless|460x460px]]<br />
<br />
=== Device preparation for Modbus TCP ===<br />
EVC2 must be configured as a secondary device via our mobile application and device must have a connection to the same network as its management system<br />
<br />
# Open "User menu"<br />
# Open "Installer menu"<br />
# Open "Load Management"<br />
# Select "Modbus TCP"<br />
# Select "Secondary"<br />
# Enable secondary device<br />
<br />
[[File:EMS Modbus TCP secondary device.png|frameless|1074x1074px]]<br />
<br />
=== Modbus register map ===<br />
{| class="wikitable"<br />
!Address<br />
!Type<br />
!Name<br />
!Format<br />
!Values<br />
!Default value<br />
!Unit<br />
!Comment<br />
|-<br />
|0<br />
|R<br />
|'''Voltage L1'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|V<br />
|Input voltage on L1<br />
|-<br />
|1<br />
|R<br />
|'''Voltage L2'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|V<br />
|Input voltage on L2<br />
|-<br />
|2<br />
|R<br />
|'''Voltage L3'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|V<br />
|Input voltage on L2<br />
|-<br />
|3<br />
|R<br />
|'''Current L1'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|*10 A<br />
|Current on L1<br />
|-<br />
|4<br />
|R<br />
|'''Current L2'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|*10 A<br />
|Current on L2<br />
|-<br />
|5<br />
|R<br />
|'''Current L3'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|*10 A<br />
|Current on L3<br />
|-<br />
|6<br />
|R<br />
|'''EVSE status'''<br />
|uint16<br />
|0-9<br />
| -<br />
| -<br />
|Evse state in DLM (see "a" below)<br />
|-<br />
|7<br />
|R<br />
|'''EVSE status time 1st word'''<br />
|uint16<br />
| -32768 - 32767<br />
| -<br />
|s<br />
|Evse status time, first word (uint16_t)<br />
|-<br />
|8<br />
|R<br />
|'''EVSE status time 2nd word'''<br />
|uint16<br />
| -32768 - 32767<br />
| -<br />
|s<br />
|Evse status time, second word (uint16_t) >> 16<br />
|-<br />
|9<br />
|R<br />
|'''EVSE ID'''<br />
|uint16<br />
|21571<br />
|21571("TC")<br />
| -<br />
|Teltocharge ID<br />
|-<br />
|10<br />
|R<br />
|'''EVSE 3ph config'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - not possible, 1 - possible<br />
|-<br />
|11<br />
|R<br />
|'''Phase change'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - not possible, 1 - possible<br />
|-<br />
|12<br />
|R<br />
|'''Amp limit'''<br />
|uint16<br />
|0,6-32<br />
| -<br />
|A<br />
|Max amps the EVSE can supply<br />
|-<br />
|13<br />
|R<br />
|'''Phase connected'''<br />
|uint16<br />
|0-6<br />
| -<br />
| -<br />
|0 - L1,<br />
1 - L2, 2 - L3, 3 - L1/L2, 4 - L1/L3, 5 - L2/L3, 6 - 3ph 7 - none<br />
|-<br />
|14<br />
|R/W<br />
|'''Phase to use'''<br />
|uint16<br />
|0-7<br />
| -<br />
| -<br />
|Sets which phase to use for slave,<br />
0 - L1, 1 - L2, 2 - L3, 3 - L1/L2, 4 - L1/L3, 5 - L2/L3, 6 - 3ph, 7 - none<br />
|-<br />
|15<br />
|R/W<br />
|'''Amps to use'''<br />
|uint16<br />
|0, 6-32<br />
| -<br />
|A<br />
|Sets max allowed from primary to secondary<br />
|-<br />
|16<br />
|R/W<br />
|'''Request stop charging'''<br />
|uint16<br />
|0-2<br />
| -<br />
| -<br />
|Do not intervene with current session (0), stop session (1) or start session if stopped (2).<br />
|-<br />
|17<br />
|R/W<br />
|'''Request authorize'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|Request authorization<br />
|-<br />
|18<br />
|R/W<br />
|'''Lock/unlock socket'''<br />
|uint16<br />
|0-2<br />
|0<br />
| -<br />
|0 - auto lock,<br />
1 - always lock, 2 - force unlock in auto mode (resets on state A)<br />
|-<br />
|19<br />
|R/W<br />
|'''Communication timeout'''<br />
|uint16<br />
|0-600<br />
|30<br />
|s<br />
|Defines communication watchdog (0 - no req for periodic comm)<br />
|-<br />
|20<br />
|R/W<br />
|'''Failsafe current'''<br />
|uint16<br />
|0, 6-32<br />
|6<br />
|A<br />
|Defines max allowed current on comm timeout<br />
|-<br />
|21<br />
|R/W<br />
|'''Request reboot'''<br />
|uint16<br />
|0-1<br />
|0<br />
| -<br />
|Request reboot<br />
|-<br />
|22<br />
|R<br />
|'''Require authorization'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|Defines requirement for authorization<br />
|-<br />
|23<br />
|R<br />
|'''Product code'''<br />
|uint16<br />
|0-9999<br />
|1234<br />
| -<br />
|Product code EVCxxxx<br />
|-<br />
|24<br />
|R<br />
|'''Serial number 1st word'''<br />
|<br />
|0-65535<br />
|123456789<br />
|s<br />
|Serial number, first word (uint16_t)<br />
|-<br />
|25<br />
|R<br />
|'''Serial number 2nd word'''<br />
|<br />
|0-65535<br />
|<br />
|s<br />
|Serial number, second word (uint16_t) >> 16<br />
|-<br />
|26<br />
|R<br />
|'''FW version'''<br />
|uint16<br />
|11200-29999<br />
| -<br />
| -<br />
|FW version<br />
|-<br />
|27<br />
|R<br />
|'''Charge point state'''<br />
|uint16<br />
|0-9<br />
| -<br />
| -<br />
|Defines charge point state (see "b" below)<br />
|-<br />
|28<br />
|R<br />
|'''Max power from grid'''<br />
|uint16<br />
|6-1000<br />
|30<br />
| -<br />
|Defines max power from grid<br />
|-<br />
|29<br />
|R<br />
|'''User settable max current'''<br />
|uint16<br />
|6-32<br />
|10<br />
| -<br />
|Defines max settable current by user<br />
|-<br />
|30<br />
|R<br />
|'''Lock status'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - unlocked,<br />
1 - locked<br />
|-<br />
|31<br />
|R<br />
|'''Internal temperature'''<br />
|int16<br />
| -400 - +1250<br />
| -<br />
|*10°C<br />
|Device's temperature<br />
|-<br />
|32<br />
|R<br />
|'''OCPP connected'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - off,<br />
1 - on<br />
|-<br />
|33<br />
|R<br />
|'''IEC state'''<br />
|uint16<br />
|0-8<br />
| -<br />
| -<br />
|IEC state (see "c" below)<br />
|-<br />
|34<br />
|R<br />
|'''Warning code'''<br />
|uint16<br />
|0-65535<br />
| -<br />
| -<br />
|Warning code with bit positions (see "d" below)<br />
|-<br />
|35<br />
|R<br />
|'''Error code'''<br />
|uint16<br />
|0-65535<br />
| -<br />
| -<br />
|Error code with bit positions (see "e" below)<br />
|-<br />
|36<br />
|R<br />
|'''Current limit cause'''<br />
|uint16<br />
|0-8<br />
| -<br />
| -<br />
|Cause of current limit (see "f" below)<br />
|-<br />
|37<br />
|R<br />
|'''Max supported power'''<br />
|uint16<br />
|0-2<br />
| -<br />
| -<br />
|0 - 7.4 kW (1ph 32 A),<br />
1 - 11 kW (3ph 16 A), 2 - 22 kW (3ph 32 A)<br />
|-<br />
|38<br />
|R<br />
|'''Instant active power'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|W<br />
|Instant power<br />
|-<br />
|39<br />
|R<br />
|'''Energy delivered'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power per session<br />
|-<br />
|40<br />
|R<br />
|'''Session duration'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|s<br />
|Session duration<br />
|-<br />
|41<br />
|R<br />
|'''Total kWh supplied 1st word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t)<br />
|-<br />
|42<br />
|R<br />
|'''Total kWh supplied 2nd word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t) >> 16<br />
|-<br />
|43<br />
|R<br />
|'''Total kWh supplied 3rd word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t) >> 32<br />
|-<br />
|44<br />
|R<br />
|'''Total kWh supplied 4th word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t) >> 48<br />
|}<br />
{| class="wikitable"<br />
|+Explanation<br />
|'''a'''<br />
|0 - C: charging;<br />
1 - B1: EV connected, authorization granted, waiting for EV to start charging;<br />
<br />
2 - B2: EV connected, authorization granted, was charging, not enough power;<br />
<br />
3 - B3: EV connected, authorization granted, wasn't charging, not enough power;<br />
<br />
4 - D1: EV connected, charging stopped by EV;<br />
<br />
5 - D2: EV connected, no authorization;<br />
<br />
6 - D3: EV connected, simplified CP or D state charging not allowed;<br />
<br />
7 - A: EV not connected; 8 - F: Error state; 9 - E: Unknown state.<br />
|-<br />
|'''b'''<br />
|0 – no EV connected;<br />
1 – vehicle connected, awaiting permission to charge;<br />
<br />
2 – charging authorized;<br />
<br />
3 – charging in progress;<br />
<br />
4 – charging paused;<br />
<br />
5 – charge successful (EV connected);<br />
<br />
6 – charge stopped by the user;<br />
<br />
7 – charging error;<br />
<br />
8 – charging station reserved, no EV connected;<br />
<br />
9 – other.<br />
|-<br />
|'''c'''<br />
|0 – A: no vehicle connected;<br />
1 – B1: EV connected, pending authorization, no PWM;<br />
<br />
2 – B2: EV connected, EVSE ready for charging, PWM active (state B2);<br />
<br />
3 – C1: ready to charge or stop charge request by EVSE, S2 closed, no PWM;<br />
<br />
4 – C2: charging EV;<br />
<br />
5 – D1: ready to charge or stop charge request by EVSE, S2 closed, ventilation required, no PWM;<br />
<br />
6 – D2: charging EV, ventilation required;<br />
<br />
7 – E: control pilot (CP) fault;<br />
<br />
8 – F: EVSE fault.<br />
|-<br />
|'''d'''<br />
|0 – midplate is open (HW-dependent);<br />
1 – temperature warning;<br />
<br />
2 – current draw is higher than allowed;<br />
<br />
3 – charging requires ventilation;<br />
<br />
4 – real time clock lost;<br />
<br />
5 – simplified cp sequence denied;<br />
<br />
6 – simplified cp sequence detected;<br />
<br />
7 – charging without ventilation denied;<br />
<br />
8 – PEN CT clamp not calibrated (HW-dependent);<br />
<br />
9 – NFC module fault;<br />
<br />
10 – PEN fault was detected (HW-dependent).<br />
|-<br />
|'''e'''<br />
|0 – input voltage not in range;<br />
1 – output voltage not in range;<br />
<br />
2 – current leakage sensor test failed;<br />
<br />
3 – EV diode is failed, or fault in CP line;<br />
<br />
4 – overcurrent error;<br />
<br />
5 – temperature error;<br />
<br />
6 – PEN fault active (UK HW only);<br />
<br />
7 – proximity pilot (cable, socket) error;<br />
<br />
8 – current leakage detected;<br />
<br />
9 – socket lock error;<br />
<br />
10 – internal error.<br />
|-<br />
|'''f'''<br />
|0 – Hardware limits;<br />
1 – Max power from grid;<br />
<br />
2 – User setting (static load balance);<br />
<br />
3 – Charging cable;<br />
<br />
4 – Simple CP sequence;<br />
<br />
5 – EVSE default settings;<br />
<br />
6 – Load balance;<br />
<br />
7 – Temperature.<br />
|}<br />
Systems that support us<br />
{| class="wikitable"<br />
|+<br />
!Product<br />
!Link<br />
|-<br />
|Eniris<br />
|https://docs.eniris.io/en/Controller/Devices/EV-charging-station/Teltonika#teltonika-ev-charging-stations<br />
|}</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=File:EMS_Modbus_TCP_secondary_device.png&diff=5496
File:EMS Modbus TCP secondary device.png
2026-06-03T08:38:01Z
<p>KarolisS: </p>
<hr />
<div>EMS Modbus TCP secondary device</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=File:EMS_Modbus_RTU_secondary_device.png&diff=5495
File:EMS Modbus RTU secondary device.png
2026-06-03T08:23:13Z
<p>KarolisS: </p>
<hr />
<div>EMS Modbus RTU secondary device</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=Main_Page_EVC2&diff=5485
Main Page EVC2
2026-05-13T11:50:00Z
<p>KarolisS: /* General information */</p>
<hr />
<div>=General information=<br />
<br><br />
<div style="background-color: #f2f2f2; padding: 20px;"> <br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[General information]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<ul><br />
<li>[[General Specifications EVC2|General Specifications]]</li><br />
<li>[[EVC_2_Datasheets|Datasheet]]</li><br />
<li>[[Electrical Specifications EVC2|Electrical Specifications]]</li><br />
<li>[[Warranty/EVC2|Warranty]]</li><br />
<li>[[Compliance documentation EVC2|Compliance documentation]]<br />
</ul><br />
<br />
<br />
<div style="background-color: #f2f2f2; padding: 0px;"> <br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[Getting Started]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<br />
<ul style="list-style-type: disc; margin-left: 20px; padding: 0;"><br />
<li>[[First Start Guide EVC2|First Start Guide]]</li><br />
<li>[[Media:EVC200 installation manual shortened.pdf|Physical installation process]]</li><br />
<li>[[Media:EVC200 Installation manual V.10.200.pdf|Installation Manual]]</li><br />
<li>[[Quick user guide of mobile application EVC2|Quick user guide of mobile application]]</li><br />
</ul><br />
<br />
<br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 0px; text-align: center;">[[Product guides]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<ul><br />
<li>[[Functionalities EVC2|Functionalities]]</li><br />
<li>[[Troubleshooting Guide EVC2|Troubleshooting Guide]]</li><br />
<li>[[TeltoCharge product codes EVC2|Product numbers - what to order?]]</li><br />
</ul><br />
<br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 0px; text-align: center;">[[Accessories]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<ul><br />
<li>[[EVC2 P1 dongle|P1 dongle]]</li><br />
<li>[[EVC2 Modbus TCP meters|Modbus TCP meters]]</li><br />
<li>[[EVC2 Modbus RTU meters|Modbus RTU meters]]</li><br />
<li>[[EVC2 CT clamps|CT clamps]]</li><br />
<li>[[EVC2 single/double poles|Single and double mounting poles]]</li><br />
<li>[[EVC2 quadruple mounting poles|Quadruple mounting pole]]</li><br />
<li>[[EVC2 cable holder|Cable holder]]</li><br />
<li>[[EVC2 nfc card pack|NFC card pack]]</li><br />
<li>[[EVC2 RCBO|RCBO device]]</li><br />
<li>[[EVC2 frontplates|Frontplates]]</li><br />
</ul><br />
<br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[Advanced Topics]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<ul><br />
<li>[[Potential free contact|'''NEW:''' Potential free contact]]</li><br />
<li>[[Power Selector Switch|'''NEW:''' Power Selector Switch]]</li><br />
<li>[[Restart button|'''NEW:''' Button functionality]]</li><br />
<li>[[2x RS458 support|'''NEW:'''2x:RS485 ports for DLM & MID]]</li><br />
<li>[[Dynamic Load Balancing EVC2|Dynamic Load Balancing]]</li><br />
&rarr;[[Dynamic Load Balancing EVC2#SMART METER AND TELTOCHARGE COMMUNICATION|DLB with Smart meters]]<br><br />
&rarr; &rarr;[[Dynamic Load Balancing EVC2#MODBUS RTU METERS|Modbus RTU meters]]<br><br />
&rarr; &rarr;[[Dynamic Load Balancing EVC2#Supported_Modbus_RTU_models|Supported Smart Energy meters]]<br><br />
&rarr; &rarr;[[Dynamic Load Balancing EVC2#MODBUS TCP/IP METERS|Modbus TCP/IP meters]]<br><br />
&rarr; &rarr;[[Dynamic Load Balancing EVC2#Supported_Modbus_TCP/IP_models|Supported TCP/IP smart energy meters]]<br><br />
&rarr;[[Dynamic Load Balancing EVC2#CT CLAMPS|DLB with CT clamps]]<br><br />
&rarr;[[Dynamic Load Balancing EVC2#EXTERNAL CONTROL|DLB with External control]]<br><br />
&rarr;[[Dynamic Load Balancing EVC2#SMARTSTUFF P1 CONVERTER|DLB with P1 Smartstuff converter]]<br><br />
&rarr;[[Dynamic Load Balancing EVC2#TELTONIKA ENERGY APP SETTINGS|DLB configuration]]<br><br />
<li>[[Solar integration EVC2|Solar integration]]</li><br />
<li>[[Dynamic Load Management EVC2|Dynamic Load Management]]</li><br />
&rarr;[[Dynamic Load Management EVC2#DLM VIA MODBUS RTU|DLM via modbus RTU]]<br><br />
&rarr;[[Dynamic Load Management EVC2#DLM VIA MODBUS TCP/IP|DLM via modbus TCP/IP]]<br><br />
&rarr;[[Dynamic Load Management EVC2#TELTONIKA ENERGY APP SETTINGS|DLM configuration]]<br><br />
<li>[[OCPP 1.6 JSON guide EVC2|Connecting Teltonika EVC stations via OCPP 1.6 JSON Guide]]</li><br />
&rarr; [[OCPP 1.6 JSON guide EVC2#COMPATIBLE SOFTWARE PROVIDERS FOR OCPP INTEGRATION|Compatible Software Providers for OCPP Integration]]<br><br />
<li>[[In app diagnostics|In app diagnostics]]</li><br />
<br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[Resources]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<li>[[EVC2 firmware|Firmware]]</li><br />
<li>[[FAQEVC2|FAQ]]</li><br />
<li>[[UseCases2|Use cases]]</li><br />
<li>[[SupportEVC2|Support forum]]</li><br />
<li>[[Preventive Maintenance|Preventive Maintenance]]</li><br />
<br />
</ul><br />
</ul><br />
</big><br />
<br />
[[Category: Main Page]]</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=SDM_models&diff=5484
SDM models
2026-05-12T07:02:04Z
<p>KarolisS: /* Eastron smart energy meters technical information */</p>
<hr />
<div>← [[Smart energy meters]]<br />
==== Eastron smart energy meters technical information ==== <br />
{| class="wikitable" style="text-align: center; border: 1px solid #dddddd; font-family: arial, sans-serif; width: 70%;"<br />
|-<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" | Energy meter manufacturer<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" | Type<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" | Power supply (V)<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" | Supported model for DLB*<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" | Supported model for Solar*<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" | MID certified<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" | 1/3 phase<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" | Connection<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" | Direct Connection Rating Value<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" | Datasheet<br />
|-<br />
| style="padding: 2px;" rowspan="2" | Eastron SDM<br />
| style="padding: 2px;" rowspan="1" | SDM54-M <br><br />
| style="padding: 1px;" | 400 V<br />
| style="padding: 2px;" | Yes<br />
| style="padding: 1px;" | Yes<br />
| style="padding: 2px;" | Yes<br />
| style="padding: 2px;" | 3 phases<br />
| style="padding: 2px;" | Direct<br />
| style="padding: 2px;" | 100 Amps<br />
| style="padding: 2px;" | [https://www.eastroneurope.com/products/view/sdm54-m SDM54-M]<br />
|-<br />
| style="padding: 2px;" rowspan="1" | SDM72D-M V2 <br><br />
| style="padding: 2px;" | 400 V<br />
| style="padding: 1px;" | Yes<br />
| style="padding: 1px;" | Yes<br />
| style="padding: 2px;" | Yes<br />
| style="padding: 2px;" | 3 phases<br />
| style="padding: 2px;" | Direct<br />
| style="padding: 2px;" | 100 Amps<br />
| style="padding: 1px;" | [https://www.eastroneurope.com/products/view/sdm72modbus SDM72-M V2]<br />
|-<br />
|Eastron SDM<br />
|SDM72CTM<br />
|230V/400V<br />
|Yes<br />
|Yes<br />
|No<br />
|3<br />
phase<br />
|CT<br />
|100Amps<br />
|[https://www.eastroneurope.com/images/uploads/products/manuals/SDM72CT-M_user_manual_V1.2.pdf SDM72CT-M]<br />
|-<br />
|Eastron SDM<br />
|SDM630Modbus V2<br />
|230V/400V<br />
|Yes<br />
|Yes<br />
|Yes<br />
|1 / 3 phase<br />
|Direct<br />
|100 Amps<br />
|[https://asset.conrad.com/media10/ad/160267/19d4690e133380f076daee5ebc9306f73/c3/-/af9a5da5c27f043d5953fc3d64b5e64b6?clpi=0 Link]<br />
|-<br />
|Eastron SDM<br />
|SDM630Modbus V3 <br />
|230V/400V<br />
|Yes<br />
|Yes<br />
|Yes<br />
|1 / 3 phase<br />
|Direct<br />
|100 Amps<br />
|[https://tienda.distribucionessolares.es/attachment/download?attachment_id=6124 Link]<br />
|-<br />
|Eastron SDM<br />
|SDM630-M<br />
|230V/400V<br />
|Yes<br />
|Yes<br />
|Yes<br />
|1 / 3 phase<br />
|Direct<br />
|100 Amps<br />
|[https://www.eastrongroup.com/product/ev-charging-metering/mid-etl-din-rail-three-phase-multifunction-ev-charger-meter.html Link]<br />
|-<br />
|Eastron SDM<br />
|SDM630-MB<br />
|230V/400V<br />
|Yes<br />
|Yes<br />
|Yes<br />
|1 / 3 phase<br />
|Direct<br />
|100 Amps<br />
|[https://www.eastrongroup.com/product/three-phase-mid-energy-meter/dual-tariffs-mbus-din-rail-three-phase-mid-energy-meter.html Link]<br />
|-<br />
|Eastron SDM<br />
|SDM630-EV V2<br />
|230V/400V<br />
|Yes<br />
|Yes<br />
|Yes<br />
|1 / 3 phase<br />
|Direct<br />
|100 Amps<br />
|[https://www.eastroneurope.com/products/view/sdm630-ev Link]<br />
|-<br />
|Eastron SDM<br />
|SDM630-MT<br />
|230V/400V<br />
|Yes<br />
|Yes<br />
|Yes<br />
|1 / 3 phase<br />
|Direct<br />
|100 Amps<br />
|[https://www.mg-solar-shop.com/media/pdf/57/7a/de/datasheet_kaco_smart_meter_eastron_sdm630.pdf Link]<br />
|-<br />
|Eastron SDM<br />
|SDM630-2T<br />
|230V/400V<br />
|Yes<br />
|Yes<br />
|Yes<br />
|1 / 3 phase<br />
|Direct<br />
|100 Amps<br />
|[https://www.evexpert.eu/p/587/eastron-sdm630-2t-modbus-rtu-mid-professional-three-phase-energy-meter Link]<br />
|-<br />
|Eastron SDM<br />
|SDM630MCT V2<br />
|230V/400V<br />
|Yes<br />
|Yes<br />
|Yes<br />
|1 / 3 phase<br />
|CT<br />
| -<br />
|[https://www.eastrongroup.com/product/ev-charging-metering/mid-etl-ct-type-din-rail-three-phase-multifunction-energy-meter-for-ev-charging-metering.html Link]<br />
|-<br />
|Eastron SDM<br />
|SDM630MCT<br />
|230V/400V<br />
|Yes<br />
|Yes<br />
|Yes<br />
|1 / 3 phase<br />
|CT<br />
| -<br />
|[https://yuubbb.com/images/pdfs/186/datasheet-eastron-sdm-630-mct-4b6a12296d-1_66e17842223a8.pdf Link]<br />
|-<br />
|Eastron SDM<br />
|SDM630MCT-LR<br />
|230V/400V<br />
|Yes<br />
|Yes<br />
|No<br />
|1 / 3 phase<br />
|CT<br />
| -<br />
|[https://www.eastrongroup.com/product/three-phase-ul-energy-meter/ct-operated-lorawan-din-rail-three-phase-ul-energy-meter.html Link]<br />
|-<br />
|Eastron SDM<br />
|SDM630MCT-2T<br />
|230V/400V<br />
|Yes<br />
|Yes<br />
|Yes<br />
|1 / 3 phase<br />
|CT<br />
| -<br />
|[https://www.eastrongroup.com/product/ev-charging-metering/mid-etl-ct-type-din-rail-three-phase-multifunction-energy-meter-for-ev-charging-metering.html Link]<br />
|-<br />
|Eastron SDM<br />
|SDM230-M<br />
|230V<br />
|Yes<br />
|Yes<br />
|Yes<br />
|1 phase<br />
|Direct<br />
|100 Amps<br />
|[https://wiki.teltonika-energy.com/images/4/40/SDM230-M_MID_datasheet.pdf Link]<br />
|}<br />
<br />
==== Eastron meters wiring: ====<br />
[[File:Eastron sdm72.png|thumb|alt=|none|600x600px]]<br />
<br />
<br />
====Powering the energy meter ====<br />
To correctly connect the smart energy meter to a power source, it is recommended to use the manufacturer's installation manuals</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=Main_Page_EVC2&diff=5481
Main Page EVC2
2026-05-05T12:46:53Z
<p>KarolisS: </p>
<hr />
<div>=General information=<br />
<br><br />
<div style="background-color: #f2f2f2; padding: 20px;"> <br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[General information]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<ul><br />
<li>[[General Specifications EVC2|General Specifications]]</li><br />
<li>[[EVC_2_Datasheets|Datasheet]]</li><br />
<li>[[Electrical Specifications EVC2|Electrical Specifications]]</li><br />
<li>[[Warranty/EVC2|Warranty]]</li><br />
<li>[[Compliance documentation EVC2|Compliance documentation]]<br />
</ul><br />
<br />
<br />
<div style="background-color: #f2f2f2; padding: 0px;"> <br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[Getting Started]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<br />
<ul style="list-style-type: disc; margin-left: 20px; padding: 0;"><br />
<li>[[First Start Guide EVC2|First Start Guide]]</li><br />
<li>[[Media:EVC200_installation_manual_shortened.pdf|Physical installation process]]</li><br />
<li>[[Media:EVC200 Installation manual V.10.200.pdf|Installation Manual]]</li><br />
<li>[[Quick user guide of mobile application EVC2|Quick user guide of mobile application]]</li><br />
</ul><br />
<br />
<br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 0px; text-align: center;">[[Product guides]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<ul><br />
<li>[[Functionalities EVC2|Functionalities]]</li><br />
<li>[[Troubleshooting Guide EVC2|Troubleshooting Guide]]</li><br />
<li>[[TeltoCharge product codes EVC2|Product numbers - what to order?]]</li><br />
</ul><br />
<br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 0px; text-align: center;">[[Accessories]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<ul><br />
<li>[[EVC2 P1 dongle|P1 dongle]]</li><br />
<li>[[EVC2 Modbus TCP meters|Modbus TCP meters]]</li><br />
<li>[[EVC2 Modbus RTU meters|Modbus RTU meters]]</li><br />
<li>[[EVC2 CT clamps|CT clamps]]</li><br />
<li>[[EVC2 single/double poles|Single and double mounting poles]]</li><br />
<li>[[EVC2 quadruple mounting poles|Quadruple mounting pole]]</li><br />
<li>[[EVC2 cable holder|Cable holder]]</li><br />
<li>[[EVC2 nfc card pack|NFC card pack]]</li><br />
<li>[[EVC2 RCBO|RCBO device]]</li><br />
<li>[[EVC2 frontplates|Frontplates]]</li><br />
</ul><br />
<br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[Advanced Topics]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<ul><br />
<li>[[Potential free contact|'''NEW:''' Potential free contact]]</li><br />
<li>[[Power Selector Switch|'''NEW:''' Power Selector Switch]]</li><br />
<li>[[Restart button|'''NEW:''' Button functionality]]</li><br />
<li>[[2x RS458 support|'''NEW:'''2x:RS485 ports for DLM & MID]]</li><br />
<li>[[Dynamic Load Balancing EVC2|Dynamic Load Balancing]]</li><br />
&rarr;[[Dynamic Load Balancing EVC2#SMART METER AND TELTOCHARGE COMMUNICATION|DLB with Smart meters]]<br><br />
&rarr; &rarr;[[Dynamic Load Balancing EVC2#MODBUS RTU METERS|Modbus RTU meters]]<br><br />
&rarr; &rarr;[[Dynamic Load Balancing EVC2#Supported_Modbus_RTU_models|Supported Smart Energy meters]]<br><br />
&rarr; &rarr;[[Dynamic Load Balancing EVC2#MODBUS TCP/IP METERS|Modbus TCP/IP meters]]<br><br />
&rarr; &rarr;[[Dynamic Load Balancing EVC2#Supported_Modbus_TCP/IP_models|Supported TCP/IP smart energy meters]]<br><br />
&rarr;[[Dynamic Load Balancing EVC2#CT CLAMPS|DLB with CT clamps]]<br><br />
&rarr;[[Dynamic Load Balancing EVC2#EXTERNAL CONTROL|DLB with External control]]<br><br />
&rarr;[[Dynamic Load Balancing EVC2#SMARTSTUFF P1 CONVERTER|DLB with P1 Smartstuff converter]]<br><br />
&rarr;[[Dynamic Load Balancing EVC2#TELTONIKA ENERGY APP SETTINGS|DLB configuration]]<br><br />
<li>[[EMS configuration EVC2|EMS configuration]]</li><br />
<li>[[Solar integration EVC2|Solar integration]]</li><br />
<li>[[Dynamic Load Management EVC2|Dynamic Load Management]]</li><br />
&rarr;[[Dynamic Load Management EVC2#DLM VIA MODBUS RTU|DLM via modbus RTU]]<br><br />
&rarr;[[Dynamic Load Management EVC2#DLM VIA MODBUS TCP/IP|DLM via modbus TCP/IP]]<br><br />
&rarr;[[Dynamic Load Management EVC2#TELTONIKA ENERGY APP SETTINGS|DLM configuration]]<br><br />
<li>[[OCPP 1.6 JSON guide EVC2|Connecting Teltonika EVC stations via OCPP 1.6 JSON Guide]]</li><br />
&rarr; [[OCPP 1.6 JSON guide EVC2#COMPATIBLE SOFTWARE PROVIDERS FOR OCPP INTEGRATION|Compatible Software Providers for OCPP Integration]]<br><br />
<li>[[In app diagnostics|In app diagnostics]]</li><br />
<br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[Resources]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<li>[[EVC2 firmware|Firmware]]</li><br />
<li>[[FAQEVC2|FAQ]]</li><br />
<li>[[UseCases2|Use cases]]</li><br />
<li>[[SupportEVC2|Support forum]]</li><br />
<li>[[Preventive Maintenance|Preventive Maintenance]]</li><br />
<br />
</ul><br />
</ul><br />
</big><br />
<br />
[[Category: Main Page]]</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=Dynamic_Load_Balancing_EVC2&diff=5480
Dynamic Load Balancing EVC2
2026-05-05T11:34:08Z
<p>KarolisS: /* DLB support */</p>
<hr />
<div><br />
= DYNAMIC LOAD BALANCING =<br />
EVC2 can communicate with a dedicated smart energy meter and adjust its power consumption based on the meter's readings. This functionality helps protect the home's electrical grid from overload during peak hours and optimizes energy usage to match the user's habits. The smart energy meter should always be installed in the main electrical cabinet, as shown below.<br />
[[File:Dynamic_Load_Balancing_Conection_Schematic.png|alt=|center|frameless|395x395px]]<br />
<br />
=== DLB support ===<br />
We can achieve DLB support by pairing the charger with one of the following:<br />
<br />
* [[Dynamic Load Balancing EVC2#MODBUS RTU METERS|Modbus RTU meters]]<br />
* [[Dynamic Load Balancing EVC2#MODBUS TCP/IP METERS|Modbus TCP/IP meters]]<br />
* [[Dynamic Load Balancing EVC2#CT CLAMPS|CT clamps]]<br />
* [[Dynamic Load Balancing EVC2#EXTERNAL CONTROL|External control (EMS)]]<br />
* [[Dynamic Load Balancing EVC2#SMARTSTUFF P1 CONVERTER|Smartstuff P1 converter]]<br />
<br />
DLB can then be configured using the app following [[Dynamic Load Balancing EVC2#TELTONIKA ENERGY APP SETTINGS|these instructions]].<br />
<br />
== PHASE BALANCE EXPLANATION ==<br />
TeltoCharge has advanced functionality to detect a car's charging type and, if required, switch phases during mid-charge.<br />
<br />
The same phase switch process will happen if the smart meter detects, that less than 6A is available for one of the phases.<br />
<br />
=== Adaptation to the car's charging capability ===<br />
If the charger is set for 3phase charging, but the plugged car can only draw current from one phase, TeltoCharge will switch to one-phase mode after a short period of time<br />
<br />
[[File:CarExample.png|frameless|493x493px]]<br />
<br />
=== Phase balance during lack of power ===<br />
When the smart meter detects that there is less than 6A for each phase, the charging station will switch from 3phase mode to 1phase mode until 6ampers are available for all phases<br />
<br />
[[File:PhaseSwitch.png|frameless|600x600px]]<br />
<br />
== MODBUS RTU METERS ==<br />
To access energy measurement through Modbus RTU, connect both charger and the meter together using RS485 terminal for meter.<br />
<br />
[[File:DLB meter.png|frameless|808x808px]]<br />
<br />
=== RS485 communication ===<br />
For RS485 communication it is recommended to use a twister pair communication cable. Check example below.<br />
<br />
[[File:TeltoCharge_DLB_CableExample.png|frameless]]<br />
<br />
'''Note:''' ''Communication cable should be integrated with power cable.''<br />
<br />
In order to strive for wider applicability and compatibility, we constantly test and add new supported devices into list. All of the supported energy meters and schematics how to connect them are provided below. <br />
<br />
In order to make '''Dynamic load balancing''' and '''Solar''' functionality work, please always check:<br />
<br />
* if the '''wiring''' your Smart energy meter to EVC2 is right.<br />
* if the '''installer menu configuration''' in mobile application according to your smart energy meter is right.<br />
<br />
=== Supported Modbus RTU models ===<br />
{| class="wikitable" style="text-align: center; border: 1px solid #dddddd; font-family: arial, sans-serif; width: 60%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Energy meter manufacturer<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Technical information<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Configuration in mobile application<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Wiring scheme<br />
|-<br />
| style="padding: 2px;" |Carlo Gavazzi series 1-3 <br />
| style="padding: 2px;" |[[EM and ET models]] <br />
| style="padding: 2px;" |[[Carlo Gavazzi settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/view/EM_and_ET_models#Carlo_Gavazzi_meters_wiring: METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |Siemens PACxxxx <br />
| style="padding: 2px;" |[[PAC models]] <br />
| style="padding: 2px;" |[[Siemens settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/0/0e/Siemens_PAC_Sentron.png METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |ABB A4x ; B2x <br />
| style="padding: 2px;" |[[A and B models]] <br />
| style="padding: 2px;" |[[ABB settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/e/e8/ABB_serie_A%26B_part_1.png METER -> TELTOCHARGE]<br />
|-<br />
| style="padding: 2px;" |Eastron SDMxx <br />
| style="padding: 2px;" |[[SDM models]] <br />
| style="padding: 2px;" |[[Eastron settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/5/53/Eastron_sdm72.png METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |Inepro PRO380 <br />
| style="padding: 2px;" |[[PRO model]]<br />
| style="padding: 2px;" |[[Inepro settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/3/3b/Inepro_pro380.png METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |Chint <br />
| style="padding: 2px;" |[[Chint models]]<br />
| style="padding: 2px;" |[[Chint settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/3/3b/Inepro_pro380.png METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |Entes <br />
| style="padding: 2px;" |[[ES models]]<br />
| style="padding: 2px;" |[[Entes settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/2/21/Entes.png METER -> TELTOCHARGE]<br />
|-<br />
| style="padding: 2px;" |Acrel <br />
| style="padding: 2px;" |[[Acrel models]]<br />
| style="padding: 2px;" |[[Acrel settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/d/d1/Acrel_meter.png METER -> TELTOCHARGE] <br />
|-<br />
| colspan="4" style="padding: 8px;" |''More coming soon...''<br />
|}<br />
<br />
== LOAD BALANCING CONFIGURATION ==<br />
To ensure everything works correctly, please apply the following setup :<br />
<br />
# Open user menu<br />
# Open "'''''Installer Menu'''''"<br />
# Open "'''''Dynamic Load Balancing'''''" menu<br />
# Enable "'''''Load Balancing'''''"<br />
# If smart meter is connected with RS485 wires, press "'''''Search For Device'''''"<br />
# *'''ONLY If TeltoCharge is unable''' to identify energy meter - use "'''''Manual Setup'''''"<br />
<br />
[[File:DLB_settings.png|frameless|989x989px]]<br />
<br />
== MODBUS TCP/IP METERS ==<br />
To access energy measurement through Modbus TCP/IP, connect both the meter and your charger to your network. Charger has two options: either WiFi or ethernet cable. <br />
<br />
=== Connecting Shelly 3PRO ===<br />
Download the '''Shelly smart control''' app and setup the device to connect to your network. After its configured, find the IP address given to the meter.<br />
<br />
[[File:Shelly wiki.png|frameless|935x935px]]<br />
<br />
'''''Note:''' Copy the IP as it will be used in EV charging app to connect the meter to the station''<br />
<br />
=== Connecting HomeWizard P1 ===<br />
Follow this full guide for easy installation: [[Media:HomeWizard P1 guide.pdf|HomeWizard P1.pdf]]<br />
<br />
Or in short - install the HomeWizard meter to the P1 port of your utility meter.<br />
<br />
[[File:Wizard p1 utility meter.png|frameless|284x284px]]<br />
<br />
Download the '''HomeWizard''' app and follow the setup for the meter to connect to your network. After its configured, find the IP address given to the meter.<br />
[[File:Homewizard wiki 1.png|frameless]] [[File:Homewizard wiki 3.png|frameless|592x592px]]<br />
<br />
'''''Note:''' Copy the IP as it will be used in EV charging app to connect the meter to the station''<br />
<br />
=== Load balancing using Network meter ===<br />
A given example below is for Shelly 3Pro smart meter integration, but is identical when using HomeWizard P1.<br />
<br />
To connect the meter to the station, go to '''load balancing''' section in the app, choose '''network meter''' and the model you're using. <br />
<br />
[[File:Shelly DLB 1.png|frameless|938x938px]]<br />
<br />
After that select '''IP address''' as was shown in the Shelly app. Set '''max grid load''' to match the value allowed by the grid. If everything is done right - the status should indicate that the network meter has successfully connected.<br />
<br />
[[File:Shelly DLB 2.png|937x937px]]<br />
<br />
=== Supported Modbus TCP/IP models ===<br />
{| class="wikitable" style="text-align: center; border: 1px solid #dddddd; font-family: arial, sans-serif; width: 60%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Energy meter manufacturer<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Technical information<br />
|-<br />
| style="padding: 2px;" |Shelly <br />
| style="padding: 2px;" |3em models <br />
|-<br />
| style="padding: 2px;" |Homewizard <br />
| style="padding: 2px;" |P1 models <br />
|-<br />
|Eastron<br />
|SEM<br />
|}<br />
<br />
== CT CLAMPS ==<br />
It is possible to measure power readings by connecting CT clamps to each phase. Insert each CT clamp to its dedicated terminal (blue wire to B, red wire to R slot of the terminal).<br />
<br />
<u>Make sure that clamp direction is pointing towards source (away from the charger).</u><br />
<br />
[[File:CT clamps EVC2.png|frameless|529x529px]]<br />
<br />
Recommended CT clamp specifications:<br />
<br />
* Rated input/current - depends on your total power input, but we would recommend not to exceed 150A.<br />
* Turn ratio - 3000:1.<br />
* Burden resistor - CT-Clamp '''must not have integrated burden resistor'''.<br />
<br />
<br />
Choosing to use CT clamp is done via the app in the '''Load balancing''' section. Set '''Max grid load''' to max available amps in your grid (for example: value of your breaker).<br />
<br />
Press calibrate to set the starting point.<br />
<br />
Note: Before calibration, CT clamp has to be connected to the port, but not clamped around the cable.<br />
<br />
[[File:Load balancing ct clamps.png|frameless|804x804px]]<br />
<br />
== EXTERNAL CONTROL ==<br />
This section provides an overview of the Modbus RTU interface supported by TeltoCharge electric vehicle supply equipment (EVSE). The document provides description of the available Modbus registers for the external control and communication with the charger based on a wired RS485 connection. This functionality is only available when the charger is configured as a secondary (server) device and waits for acceptable commands from the primary (client) device. The secondary device can operate on two modes:<br />
<br />
# It can be configured to use a watchdog for communication and if no valid communication is present after a configurable time interval, the charging (if ongoing) will stop and EVSE will not perform any charging until valid communication is reestablished;<br />
# the EVSE does not use a watchdog and continuous communication is not needed. As it is possible to change the EVSE settings by using the TeltoCharge mobile application, it is recommended for the primary device to read, compare, and change settings as needed based on user preferences and real-time requirements, ensuring a seamless and secure charging experience for electric vehicle owners. Continuous monitoring and adjustment of EVSE settings enable the primary device to stay synchronized with user inputs, maintain optimal charging conditions, and promptly respond to any changes initiated through the TeltoCharge mobile application, thereby enhancing overall efficiency and user satisfaction.<br />
<br />
=== Device preparation ===<br />
TeltoCharge must be configured as a secondary device via a TeltoCharge mobile application and device must have RS485 wired connection with the primary device..<br />
<br />
# Open "User menu"<br />
# Open "Installer menu"<br />
# Open "Load Management"<br />
# Select "Secondary"<br />
# Enable secondary device<br />
# Check if the address is expected in your system<br />
<br />
[[File:External.png|frameless|900x900px]] [[File:EVC2_external_controller.png|frameless|460x460px]]<br />
<br />
=== Modbus register map ===<br />
{| class="wikitable"<br />
!Address<br />
!Type<br />
!Name<br />
!Format<br />
!Values<br />
!Default value<br />
!Unit<br />
!Comment<br />
|-<br />
|0<br />
|R<br />
|'''Voltage L1'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|V<br />
|Input voltage on L1<br />
|-<br />
|1<br />
|R<br />
|'''Voltage L2'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|V<br />
|Input voltage on L2<br />
|-<br />
|2<br />
|R<br />
|'''Voltage L3'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|V<br />
|Input voltage on L2<br />
|-<br />
|3<br />
|R<br />
|'''Current L1'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|*10 A<br />
|Current on L1<br />
|-<br />
|4<br />
|R<br />
|'''Current L2'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|*10 A<br />
|Current on L2<br />
|-<br />
|5<br />
|R<br />
|'''Current L3'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|*10 A<br />
|Current on L3<br />
|-<br />
|6<br />
|R<br />
|'''EVSE status'''<br />
|uint16<br />
|0-9<br />
| -<br />
| -<br />
|Evse state in DLM (see "a" below)<br />
|-<br />
|7<br />
|R<br />
|'''EVSE status time 1st word'''<br />
|uint16<br />
| -32768 - 32767<br />
| -<br />
|s<br />
|Evse status time, first word (uint16_t)<br />
|-<br />
|8<br />
|R<br />
|'''EVSE status time 2nd word'''<br />
|uint16<br />
| -32768 - 32767<br />
| -<br />
|s<br />
|Evse status time, second word (uint16_t) >> 16<br />
|-<br />
|9<br />
|R<br />
|'''EVSE ID'''<br />
|uint16<br />
|21571<br />
|21571("TC")<br />
| -<br />
|Teltocharge ID<br />
|-<br />
|10<br />
|R<br />
|'''EVSE 3ph config'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - not possible, 1 - possible<br />
|-<br />
|11<br />
|R<br />
|'''Phase change'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - not possible, 1 - possible<br />
|-<br />
|12<br />
|R<br />
|'''Amp limit'''<br />
|uint16<br />
|0,6-32<br />
| -<br />
|A<br />
|Max amps the EVSE can supply<br />
|-<br />
|13<br />
|R<br />
|'''Phase connected'''<br />
|uint16<br />
|0-6<br />
| -<br />
| -<br />
|0 - L1,<br />
1 - L2, 2 - L3, 3 - L1/L2, 4 - L1/L3, 5 - L2/L3, 6 - 3ph 7 - none<br />
|-<br />
|14<br />
|R/W<br />
|'''Phase to use'''<br />
|uint16<br />
|0-7<br />
| -<br />
| -<br />
|Sets which phase to use for slave,<br />
0 - L1, 1 - L2, 2 - L3, 3 - L1/L2, 4 - L1/L3, 5 - L2/L3, 6 - 3ph, 7 - none<br />
|-<br />
|15<br />
|R/W<br />
|'''Amps to use'''<br />
|uint16<br />
|0, 6-32<br />
| -<br />
|A<br />
|Sets max allowed from primary to secondary<br />
|-<br />
|16<br />
|R/W<br />
|'''Request stop charging'''<br />
|uint16<br />
|0-2<br />
| -<br />
| -<br />
|Do not intervene with current session (0), stop session (1) or start session if stopped (2).<br />
|-<br />
|17<br />
|R/W<br />
|'''Request authorize'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|Request authorization<br />
|-<br />
|18<br />
|R/W<br />
|'''Lock/unlock socket'''<br />
|uint16<br />
|0-2<br />
|0<br />
| -<br />
|0 - auto lock,<br />
1 - always lock, 2 - force unlock in auto mode (resets on state A)<br />
|-<br />
|19<br />
|R/W<br />
|'''Communication timeout'''<br />
|uint16<br />
|0-600<br />
|30<br />
|s<br />
|Defines communication watchdog (0 - no req for periodic comm)<br />
|-<br />
|20<br />
|R/W<br />
|'''Failsafe current'''<br />
|uint16<br />
|0, 6-32<br />
|6<br />
|A<br />
|Defines max allowed current on comm timeout<br />
|-<br />
|21<br />
|R/W<br />
|'''Request reboot'''<br />
|uint16<br />
|0-1<br />
|0<br />
| -<br />
|Request reboot<br />
|-<br />
|22<br />
|R<br />
|'''Require authorization'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|Defines requirement for authorization<br />
|-<br />
|23<br />
|R<br />
|'''Product code'''<br />
|uint16<br />
|0-9999<br />
|1234<br />
| -<br />
|Product code EVCxxxx<br />
|-<br />
|24<br />
|R<br />
|'''Serial number 1st word'''<br />
|<br />
|0-65535<br />
|123456789<br />
|s<br />
|Serial number, first word (uint16_t)<br />
|-<br />
|25<br />
|R<br />
|'''Serial number 2nd word'''<br />
|<br />
|0-65535<br />
|<br />
|s<br />
|Serial number, second word (uint16_t) >> 16<br />
|-<br />
|26<br />
|R<br />
|'''FW version'''<br />
|uint16<br />
|11200-29999<br />
| -<br />
| -<br />
|FW version<br />
|-<br />
|27<br />
|R<br />
|'''Charge point state'''<br />
|uint16<br />
|0-9<br />
| -<br />
| -<br />
|Defines charge point state (see "b" below)<br />
|-<br />
|28<br />
|R<br />
|'''Max power from grid'''<br />
|uint16<br />
|6-1000<br />
|30<br />
| -<br />
|Defines max power from grid<br />
|-<br />
|29<br />
|R<br />
|'''User settable max current'''<br />
|uint16<br />
|6-32<br />
|10<br />
| -<br />
|Defines max settable current by user<br />
|-<br />
|30<br />
|R<br />
|'''Lock status'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - unlocked,<br />
1 - locked<br />
|-<br />
|31<br />
|R<br />
|'''Internal temperature'''<br />
|int16<br />
| -400 - +1250<br />
| -<br />
|*10°C<br />
|Device's temperature<br />
|-<br />
|32<br />
|R<br />
|'''OCPP connected'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - off,<br />
1 - on<br />
|-<br />
|33<br />
|R<br />
|'''IEC state'''<br />
|uint16<br />
|0-8<br />
| -<br />
| -<br />
|IEC state (see "c" below)<br />
|-<br />
|34<br />
|R<br />
|'''Warning code'''<br />
|uint16<br />
|0-65535<br />
| -<br />
| -<br />
|Warning code with bit positions (see "d" below)<br />
|-<br />
|35<br />
|R<br />
|'''Error code'''<br />
|uint16<br />
|0-65535<br />
| -<br />
| -<br />
|Error code with bit positions (see "e" below)<br />
|-<br />
|36<br />
|R<br />
|'''Current limit cause'''<br />
|uint16<br />
|0-8<br />
| -<br />
| -<br />
|Cause of current limit (see "f" below)<br />
|-<br />
|37<br />
|R<br />
|'''Max supported power'''<br />
|uint16<br />
|0-2<br />
| -<br />
| -<br />
|0 - 7.4 kW (1ph 32 A),<br />
1 - 11 kW (3ph 16 A), 2 - 22 kW (3ph 32 A)<br />
|-<br />
|38<br />
|R<br />
|'''Instant active power'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|W<br />
|Instant power<br />
|-<br />
|39<br />
|R<br />
|'''Energy delivered'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power per session<br />
|-<br />
|40<br />
|R<br />
|'''Session duration'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|s<br />
|Session duration<br />
|-<br />
|41<br />
|R<br />
|'''Total kWh supplied 1st word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t)<br />
|-<br />
|42<br />
|R<br />
|'''Total kWh supplied 2nd word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t) >> 16<br />
|-<br />
|43<br />
|R<br />
|'''Total kWh supplied 3rd word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t) >> 32<br />
|-<br />
|44<br />
|R<br />
|'''Total kWh supplied 4th word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t) >> 48<br />
|}<br />
{| class="wikitable"<br />
|+Explanation<br />
|'''a'''<br />
|0 - C: charging;<br />
1 - B1: EV connected, authorization granted, waiting for EV to start charging;<br />
<br />
2 - B2: EV connected, authorization granted, was charging, not enough power;<br />
<br />
3 - B3: EV connected, authorization granted, wasn't charging, not enough power;<br />
<br />
4 - D1: EV connected, charging stopped by EV;<br />
<br />
5 - D2: EV connected, no authorization;<br />
<br />
6 - D3: EV connected, simplified CP or D state charging not allowed;<br />
<br />
7 - A: EV not connected; 8 - F: Error state; 9 - E: Unknown state.<br />
|-<br />
|'''b'''<br />
|0 – no EV connected;<br />
1 – vehicle connected, awaiting permission to charge;<br />
<br />
2 – charging authorized;<br />
<br />
3 – charging in progress;<br />
<br />
4 – charging paused;<br />
<br />
5 – charge successful (EV connected);<br />
<br />
6 – charge stopped by the user;<br />
<br />
7 – charging error;<br />
<br />
8 – charging station reserved, no EV connected;<br />
<br />
9 – other.<br />
|-<br />
|'''c'''<br />
|0 – A: no vehicle connected;<br />
1 – B1: EV connected, pending authorization, no PWM;<br />
<br />
2 – B2: EV connected, EVSE ready for charging, PWM active (state B2);<br />
<br />
3 – C1: ready to charge or stop charge request by EVSE, S2 closed, no PWM;<br />
<br />
4 – C2: charging EV;<br />
<br />
5 – D1: ready to charge or stop charge request by EVSE, S2 closed, ventilation required, no PWM;<br />
<br />
6 – D2: charging EV, ventilation required;<br />
<br />
7 – E: control pilot (CP) fault;<br />
<br />
8 – F: EVSE fault.<br />
|-<br />
|'''d'''<br />
|0 – midplate is open (HW-dependent);<br />
1 – temperature warning;<br />
<br />
2 – current draw is higher than allowed;<br />
<br />
3 – charging requires ventilation;<br />
<br />
4 – real time clock lost;<br />
<br />
5 – simplified cp sequence denied;<br />
<br />
6 – simplified cp sequence detected;<br />
<br />
7 – charging without ventilation denied;<br />
<br />
8 – PEN CT clamp not calibrated (HW-dependent);<br />
<br />
9 – NFC module fault;<br />
<br />
10 – PEN fault was detected (HW-dependent).<br />
|-<br />
|'''e'''<br />
|0 – input voltage not in range;<br />
1 – output voltage not in range;<br />
<br />
2 – current leakage sensor test failed;<br />
<br />
3 – EV diode is failed, or fault in CP line;<br />
<br />
4 – overcurrent error;<br />
<br />
5 – temperature error;<br />
<br />
6 – PEN fault active (UK HW only);<br />
<br />
7 – proximity pilot (cable, socket) error;<br />
<br />
8 – current leakage detected;<br />
<br />
9 – socket lock error;<br />
<br />
10 – internal error.<br />
|-<br />
|'''f'''<br />
|0 – Hardware limits;<br />
1 – Max power from grid;<br />
<br />
2 – User setting (static load balance);<br />
<br />
3 – Charging cable;<br />
<br />
4 – Simple CP sequence;<br />
<br />
5 – EVSE default settings;<br />
<br />
6 – Load balance;<br />
<br />
7 – Temperature.<br />
|}<br />
<br />
== SMARTSTUFF P1 CONVERTER ==<br />
The Modbus P1 Dongle is a device that enables communication between your EVC charging station and a smart meter using the Modbus RS-485 protocol. This setup is essential for accurately monitoring and controlling the energy usage during EV charging sessions.<br />
<br />
* Accurate energy monitoring: Ensures that energy usage data is correctly captured and transmitted.<br />
* Optimized charging: By leveraging the data from the smart meter, the charging station can optimize the charging process, potentially reducing costs and improving efficiency.<br />
<br />
''Note:'' Before proceeding with the installation, please ensure that your smart meter is compatible with the Modbus P1 Dongle.<br />
<br />
=== Smart Meter Connection ===<br />
The dongle is connected to the P1 port of the smart meter via a provided P1 cable. This connection allows the dongle to read energy consumption data directly from the smart meter.<br />
<br />
=== RS-485 Connection ===<br />
The dongle features RS-485 terminals which are critical for establishing communication with the EVC2 system. These terminals are usually labeled as Ground (GND), A+ (positive differential signal), and B- (negative differential signal).<br />
<br />
* To connect the dongle to the EVC2, you'll need to use an appropriate RS-485 cable.<br />
* Connect the 'A+' terminal of your cable to the 'A+' port on the EVC2 device.<br />
* Connect the 'B-' terminal of your cable to the 'B-' port on the EVC2 device.<br />
<br />
''Note :'' In case of communication errors, swapping the 'A+' and 'B-' connections might resolve the issue<br />
<br />
. [[File:EVC2 p1 LB.png|frameless|801x801px]]<blockquote>https://docs.smart-stuff.nl/p1-modbus-dongle/quick-start/installation</blockquote><br />
<br />
=== General meter settings ===<br />
According to your smart meter documentation, please enter all the settings into the Energy app as shown.<br />
<br />
# '''Energy meter type''': You need to select the type of smart meter (1-phase/3-phase). Please note that you can use a 1-phase charger even if the meter is 3-phase.<br />
# '''RS-485 baud rate''': To ensure optimal performance and compatibility with the P1 smart dongle, the RS-485 baud rate must be configured to 38400.<br />
# '''RS-485 parity/stop bit''': Similarly, this information can also be found in the meter settings. If the client is unable to find it, it is advisable to check the smart meter manual.<br />
<br />
{|<br />
|[[File:Smart_stuff.png|left|frameless]]<br />
|[[File:Live_data.png|left|frameless|457x457px]]<br />
|}<br />
{|<br />
|'''''Note:''''' ''Set up the energy meter address'' <br />
<br />
''according to the smart stuff address.''<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|'''''Note:''''' ''After successfully completing these steps,''<br />
<br />
please check the diagnostic live data from the energy meter.<br />
|}<br />
<br />
== TELTONIKA ENERGY APP SETTINGS ==<br />
To ensure everything works correctly, please apply the following setup :<br />
<br />
# Open user menu<br />
# Open "'''''Installer Menu'''''"<br />
# Open "'''''Dynamic Load Balancing'''''" menu<br />
# Enable "'''''Load Balancing'''''"<br />
# If smart meter is connected with RS485 wires, press "'''''Search For Device'''''"<br />
# *'''ONLY If TeltoCharge is unable''' to identify energy meter - use "'''''Manual Setup'''''"<br />
<br />
[[File:DLB_settings.png|frameless|1062x1062px]] <br />
__FORCETOC__</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=Dynamic_Load_Balancing_EVC2&diff=5479
Dynamic Load Balancing EVC2
2026-05-05T11:31:55Z
<p>KarolisS: /* Supported Modbus TCP/IP models */</p>
<hr />
<div><br />
= DYNAMIC LOAD BALANCING =<br />
EVC2 can communicate with a dedicated smart energy meter and adjust its power consumption based on the meter's readings. This functionality helps protect the home's electrical grid from overload during peak hours and optimizes energy usage to match the user's habits. The smart energy meter should always be installed in the main electrical cabinet, as shown below.<br />
[[File:Dynamic_Load_Balancing_Conection_Schematic.png|alt=|center|frameless|395x395px]]<br />
<br />
=== DLB support ===<br />
We can achieve DLB support by pairing the charger with one of the following:<br />
<br />
* [[Dynamic Load Balancing EVC2#MODBUS RTU METERS|Modbus RTU meters]]<br />
* [[Dynamic Load Balancing EVC2#MODBUS TCP/IP METERS|Modbus TCP/IP meters]]<br />
* [[Dynamic Load Balancing EVC2#CT CLAMPS|CT clamps]]<br />
* [[Dynamic Load Balancing EVC2#EXTERNAL CONTROL|External control]]<br />
* [[Dynamic Load Balancing EVC2#SMARTSTUFF P1 CONVERTER|Smartstuff P1 converter]]<br />
<br />
DLB can then be configured using the app following [[Dynamic Load Balancing EVC2#TELTONIKA ENERGY APP SETTINGS|these instructions]].<br />
<br />
== PHASE BALANCE EXPLANATION ==<br />
TeltoCharge has advanced functionality to detect a car's charging type and, if required, switch phases during mid-charge.<br />
<br />
The same phase switch process will happen if the smart meter detects, that less than 6A is available for one of the phases.<br />
<br />
=== Adaptation to the car's charging capability ===<br />
If the charger is set for 3phase charging, but the plugged car can only draw current from one phase, TeltoCharge will switch to one-phase mode after a short period of time<br />
<br />
[[File:CarExample.png|frameless|493x493px]]<br />
<br />
=== Phase balance during lack of power ===<br />
When the smart meter detects that there is less than 6A for each phase, the charging station will switch from 3phase mode to 1phase mode until 6ampers are available for all phases<br />
<br />
[[File:PhaseSwitch.png|frameless|600x600px]]<br />
<br />
== MODBUS RTU METERS ==<br />
To access energy measurement through Modbus RTU, connect both charger and the meter together using RS485 terminal for meter.<br />
<br />
[[File:DLB meter.png|frameless|808x808px]]<br />
<br />
=== RS485 communication ===<br />
For RS485 communication it is recommended to use a twister pair communication cable. Check example below.<br />
<br />
[[File:TeltoCharge_DLB_CableExample.png|frameless]]<br />
<br />
'''Note:''' ''Communication cable should be integrated with power cable.''<br />
<br />
In order to strive for wider applicability and compatibility, we constantly test and add new supported devices into list. All of the supported energy meters and schematics how to connect them are provided below. <br />
<br />
In order to make '''Dynamic load balancing''' and '''Solar''' functionality work, please always check:<br />
<br />
* if the '''wiring''' your Smart energy meter to EVC2 is right.<br />
* if the '''installer menu configuration''' in mobile application according to your smart energy meter is right.<br />
<br />
=== Supported Modbus RTU models ===<br />
{| class="wikitable" style="text-align: center; border: 1px solid #dddddd; font-family: arial, sans-serif; width: 60%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Energy meter manufacturer<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Technical information<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Configuration in mobile application<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Wiring scheme<br />
|-<br />
| style="padding: 2px;" |Carlo Gavazzi series 1-3 <br />
| style="padding: 2px;" |[[EM and ET models]] <br />
| style="padding: 2px;" |[[Carlo Gavazzi settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/view/EM_and_ET_models#Carlo_Gavazzi_meters_wiring: METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |Siemens PACxxxx <br />
| style="padding: 2px;" |[[PAC models]] <br />
| style="padding: 2px;" |[[Siemens settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/0/0e/Siemens_PAC_Sentron.png METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |ABB A4x ; B2x <br />
| style="padding: 2px;" |[[A and B models]] <br />
| style="padding: 2px;" |[[ABB settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/e/e8/ABB_serie_A%26B_part_1.png METER -> TELTOCHARGE]<br />
|-<br />
| style="padding: 2px;" |Eastron SDMxx <br />
| style="padding: 2px;" |[[SDM models]] <br />
| style="padding: 2px;" |[[Eastron settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/5/53/Eastron_sdm72.png METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |Inepro PRO380 <br />
| style="padding: 2px;" |[[PRO model]]<br />
| style="padding: 2px;" |[[Inepro settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/3/3b/Inepro_pro380.png METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |Chint <br />
| style="padding: 2px;" |[[Chint models]]<br />
| style="padding: 2px;" |[[Chint settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/3/3b/Inepro_pro380.png METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |Entes <br />
| style="padding: 2px;" |[[ES models]]<br />
| style="padding: 2px;" |[[Entes settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/2/21/Entes.png METER -> TELTOCHARGE]<br />
|-<br />
| style="padding: 2px;" |Acrel <br />
| style="padding: 2px;" |[[Acrel models]]<br />
| style="padding: 2px;" |[[Acrel settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/d/d1/Acrel_meter.png METER -> TELTOCHARGE] <br />
|-<br />
| colspan="4" style="padding: 8px;" |''More coming soon...''<br />
|}<br />
<br />
== LOAD BALANCING CONFIGURATION ==<br />
To ensure everything works correctly, please apply the following setup :<br />
<br />
# Open user menu<br />
# Open "'''''Installer Menu'''''"<br />
# Open "'''''Dynamic Load Balancing'''''" menu<br />
# Enable "'''''Load Balancing'''''"<br />
# If smart meter is connected with RS485 wires, press "'''''Search For Device'''''"<br />
# *'''ONLY If TeltoCharge is unable''' to identify energy meter - use "'''''Manual Setup'''''"<br />
<br />
[[File:DLB_settings.png|frameless|989x989px]]<br />
<br />
== MODBUS TCP/IP METERS ==<br />
To access energy measurement through Modbus TCP/IP, connect both the meter and your charger to your network. Charger has two options: either WiFi or ethernet cable. <br />
<br />
=== Connecting Shelly 3PRO ===<br />
Download the '''Shelly smart control''' app and setup the device to connect to your network. After its configured, find the IP address given to the meter.<br />
<br />
[[File:Shelly wiki.png|frameless|935x935px]]<br />
<br />
'''''Note:''' Copy the IP as it will be used in EV charging app to connect the meter to the station''<br />
<br />
=== Connecting HomeWizard P1 ===<br />
Follow this full guide for easy installation: [[Media:HomeWizard P1 guide.pdf|HomeWizard P1.pdf]]<br />
<br />
Or in short - install the HomeWizard meter to the P1 port of your utility meter.<br />
<br />
[[File:Wizard p1 utility meter.png|frameless|284x284px]]<br />
<br />
Download the '''HomeWizard''' app and follow the setup for the meter to connect to your network. After its configured, find the IP address given to the meter.<br />
[[File:Homewizard wiki 1.png|frameless]] [[File:Homewizard wiki 3.png|frameless|592x592px]]<br />
<br />
'''''Note:''' Copy the IP as it will be used in EV charging app to connect the meter to the station''<br />
<br />
=== Load balancing using Network meter ===<br />
A given example below is for Shelly 3Pro smart meter integration, but is identical when using HomeWizard P1.<br />
<br />
To connect the meter to the station, go to '''load balancing''' section in the app, choose '''network meter''' and the model you're using. <br />
<br />
[[File:Shelly DLB 1.png|frameless|938x938px]]<br />
<br />
After that select '''IP address''' as was shown in the Shelly app. Set '''max grid load''' to match the value allowed by the grid. If everything is done right - the status should indicate that the network meter has successfully connected.<br />
<br />
[[File:Shelly DLB 2.png|937x937px]]<br />
<br />
=== Supported Modbus TCP/IP models ===<br />
{| class="wikitable" style="text-align: center; border: 1px solid #dddddd; font-family: arial, sans-serif; width: 60%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Energy meter manufacturer<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Technical information<br />
|-<br />
| style="padding: 2px;" |Shelly <br />
| style="padding: 2px;" |3em models <br />
|-<br />
| style="padding: 2px;" |Homewizard <br />
| style="padding: 2px;" |P1 models <br />
|-<br />
|Eastron<br />
|SEM<br />
|}<br />
<br />
== CT CLAMPS ==<br />
It is possible to measure power readings by connecting CT clamps to each phase. Insert each CT clamp to its dedicated terminal (blue wire to B, red wire to R slot of the terminal).<br />
<br />
<u>Make sure that clamp direction is pointing towards source (away from the charger).</u><br />
<br />
[[File:CT clamps EVC2.png|frameless|529x529px]]<br />
<br />
Recommended CT clamp specifications:<br />
<br />
* Rated input/current - depends on your total power input, but we would recommend not to exceed 150A.<br />
* Turn ratio - 3000:1.<br />
* Burden resistor - CT-Clamp '''must not have integrated burden resistor'''.<br />
<br />
<br />
Choosing to use CT clamp is done via the app in the '''Load balancing''' section. Set '''Max grid load''' to max available amps in your grid (for example: value of your breaker).<br />
<br />
Press calibrate to set the starting point.<br />
<br />
Note: Before calibration, CT clamp has to be connected to the port, but not clamped around the cable.<br />
<br />
[[File:Load balancing ct clamps.png|frameless|804x804px]]<br />
<br />
== EXTERNAL CONTROL ==<br />
This section provides an overview of the Modbus RTU interface supported by TeltoCharge electric vehicle supply equipment (EVSE). The document provides description of the available Modbus registers for the external control and communication with the charger based on a wired RS485 connection. This functionality is only available when the charger is configured as a secondary (server) device and waits for acceptable commands from the primary (client) device. The secondary device can operate on two modes:<br />
<br />
# It can be configured to use a watchdog for communication and if no valid communication is present after a configurable time interval, the charging (if ongoing) will stop and EVSE will not perform any charging until valid communication is reestablished;<br />
# the EVSE does not use a watchdog and continuous communication is not needed. As it is possible to change the EVSE settings by using the TeltoCharge mobile application, it is recommended for the primary device to read, compare, and change settings as needed based on user preferences and real-time requirements, ensuring a seamless and secure charging experience for electric vehicle owners. Continuous monitoring and adjustment of EVSE settings enable the primary device to stay synchronized with user inputs, maintain optimal charging conditions, and promptly respond to any changes initiated through the TeltoCharge mobile application, thereby enhancing overall efficiency and user satisfaction.<br />
<br />
=== Device preparation ===<br />
TeltoCharge must be configured as a secondary device via a TeltoCharge mobile application and device must have RS485 wired connection with the primary device..<br />
<br />
# Open "User menu"<br />
# Open "Installer menu"<br />
# Open "Load Management"<br />
# Select "Secondary"<br />
# Enable secondary device<br />
# Check if the address is expected in your system<br />
<br />
[[File:External.png|frameless|900x900px]] [[File:EVC2_external_controller.png|frameless|460x460px]]<br />
<br />
=== Modbus register map ===<br />
{| class="wikitable"<br />
!Address<br />
!Type<br />
!Name<br />
!Format<br />
!Values<br />
!Default value<br />
!Unit<br />
!Comment<br />
|-<br />
|0<br />
|R<br />
|'''Voltage L1'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|V<br />
|Input voltage on L1<br />
|-<br />
|1<br />
|R<br />
|'''Voltage L2'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|V<br />
|Input voltage on L2<br />
|-<br />
|2<br />
|R<br />
|'''Voltage L3'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|V<br />
|Input voltage on L2<br />
|-<br />
|3<br />
|R<br />
|'''Current L1'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|*10 A<br />
|Current on L1<br />
|-<br />
|4<br />
|R<br />
|'''Current L2'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|*10 A<br />
|Current on L2<br />
|-<br />
|5<br />
|R<br />
|'''Current L3'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|*10 A<br />
|Current on L3<br />
|-<br />
|6<br />
|R<br />
|'''EVSE status'''<br />
|uint16<br />
|0-9<br />
| -<br />
| -<br />
|Evse state in DLM (see "a" below)<br />
|-<br />
|7<br />
|R<br />
|'''EVSE status time 1st word'''<br />
|uint16<br />
| -32768 - 32767<br />
| -<br />
|s<br />
|Evse status time, first word (uint16_t)<br />
|-<br />
|8<br />
|R<br />
|'''EVSE status time 2nd word'''<br />
|uint16<br />
| -32768 - 32767<br />
| -<br />
|s<br />
|Evse status time, second word (uint16_t) >> 16<br />
|-<br />
|9<br />
|R<br />
|'''EVSE ID'''<br />
|uint16<br />
|21571<br />
|21571("TC")<br />
| -<br />
|Teltocharge ID<br />
|-<br />
|10<br />
|R<br />
|'''EVSE 3ph config'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - not possible, 1 - possible<br />
|-<br />
|11<br />
|R<br />
|'''Phase change'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - not possible, 1 - possible<br />
|-<br />
|12<br />
|R<br />
|'''Amp limit'''<br />
|uint16<br />
|0,6-32<br />
| -<br />
|A<br />
|Max amps the EVSE can supply<br />
|-<br />
|13<br />
|R<br />
|'''Phase connected'''<br />
|uint16<br />
|0-6<br />
| -<br />
| -<br />
|0 - L1,<br />
1 - L2, 2 - L3, 3 - L1/L2, 4 - L1/L3, 5 - L2/L3, 6 - 3ph 7 - none<br />
|-<br />
|14<br />
|R/W<br />
|'''Phase to use'''<br />
|uint16<br />
|0-7<br />
| -<br />
| -<br />
|Sets which phase to use for slave,<br />
0 - L1, 1 - L2, 2 - L3, 3 - L1/L2, 4 - L1/L3, 5 - L2/L3, 6 - 3ph, 7 - none<br />
|-<br />
|15<br />
|R/W<br />
|'''Amps to use'''<br />
|uint16<br />
|0, 6-32<br />
| -<br />
|A<br />
|Sets max allowed from primary to secondary<br />
|-<br />
|16<br />
|R/W<br />
|'''Request stop charging'''<br />
|uint16<br />
|0-2<br />
| -<br />
| -<br />
|Do not intervene with current session (0), stop session (1) or start session if stopped (2).<br />
|-<br />
|17<br />
|R/W<br />
|'''Request authorize'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|Request authorization<br />
|-<br />
|18<br />
|R/W<br />
|'''Lock/unlock socket'''<br />
|uint16<br />
|0-2<br />
|0<br />
| -<br />
|0 - auto lock,<br />
1 - always lock, 2 - force unlock in auto mode (resets on state A)<br />
|-<br />
|19<br />
|R/W<br />
|'''Communication timeout'''<br />
|uint16<br />
|0-600<br />
|30<br />
|s<br />
|Defines communication watchdog (0 - no req for periodic comm)<br />
|-<br />
|20<br />
|R/W<br />
|'''Failsafe current'''<br />
|uint16<br />
|0, 6-32<br />
|6<br />
|A<br />
|Defines max allowed current on comm timeout<br />
|-<br />
|21<br />
|R/W<br />
|'''Request reboot'''<br />
|uint16<br />
|0-1<br />
|0<br />
| -<br />
|Request reboot<br />
|-<br />
|22<br />
|R<br />
|'''Require authorization'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|Defines requirement for authorization<br />
|-<br />
|23<br />
|R<br />
|'''Product code'''<br />
|uint16<br />
|0-9999<br />
|1234<br />
| -<br />
|Product code EVCxxxx<br />
|-<br />
|24<br />
|R<br />
|'''Serial number 1st word'''<br />
|<br />
|0-65535<br />
|123456789<br />
|s<br />
|Serial number, first word (uint16_t)<br />
|-<br />
|25<br />
|R<br />
|'''Serial number 2nd word'''<br />
|<br />
|0-65535<br />
|<br />
|s<br />
|Serial number, second word (uint16_t) >> 16<br />
|-<br />
|26<br />
|R<br />
|'''FW version'''<br />
|uint16<br />
|11200-29999<br />
| -<br />
| -<br />
|FW version<br />
|-<br />
|27<br />
|R<br />
|'''Charge point state'''<br />
|uint16<br />
|0-9<br />
| -<br />
| -<br />
|Defines charge point state (see "b" below)<br />
|-<br />
|28<br />
|R<br />
|'''Max power from grid'''<br />
|uint16<br />
|6-1000<br />
|30<br />
| -<br />
|Defines max power from grid<br />
|-<br />
|29<br />
|R<br />
|'''User settable max current'''<br />
|uint16<br />
|6-32<br />
|10<br />
| -<br />
|Defines max settable current by user<br />
|-<br />
|30<br />
|R<br />
|'''Lock status'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - unlocked,<br />
1 - locked<br />
|-<br />
|31<br />
|R<br />
|'''Internal temperature'''<br />
|int16<br />
| -400 - +1250<br />
| -<br />
|*10°C<br />
|Device's temperature<br />
|-<br />
|32<br />
|R<br />
|'''OCPP connected'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - off,<br />
1 - on<br />
|-<br />
|33<br />
|R<br />
|'''IEC state'''<br />
|uint16<br />
|0-8<br />
| -<br />
| -<br />
|IEC state (see "c" below)<br />
|-<br />
|34<br />
|R<br />
|'''Warning code'''<br />
|uint16<br />
|0-65535<br />
| -<br />
| -<br />
|Warning code with bit positions (see "d" below)<br />
|-<br />
|35<br />
|R<br />
|'''Error code'''<br />
|uint16<br />
|0-65535<br />
| -<br />
| -<br />
|Error code with bit positions (see "e" below)<br />
|-<br />
|36<br />
|R<br />
|'''Current limit cause'''<br />
|uint16<br />
|0-8<br />
| -<br />
| -<br />
|Cause of current limit (see "f" below)<br />
|-<br />
|37<br />
|R<br />
|'''Max supported power'''<br />
|uint16<br />
|0-2<br />
| -<br />
| -<br />
|0 - 7.4 kW (1ph 32 A),<br />
1 - 11 kW (3ph 16 A), 2 - 22 kW (3ph 32 A)<br />
|-<br />
|38<br />
|R<br />
|'''Instant active power'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|W<br />
|Instant power<br />
|-<br />
|39<br />
|R<br />
|'''Energy delivered'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power per session<br />
|-<br />
|40<br />
|R<br />
|'''Session duration'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|s<br />
|Session duration<br />
|-<br />
|41<br />
|R<br />
|'''Total kWh supplied 1st word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t)<br />
|-<br />
|42<br />
|R<br />
|'''Total kWh supplied 2nd word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t) >> 16<br />
|-<br />
|43<br />
|R<br />
|'''Total kWh supplied 3rd word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t) >> 32<br />
|-<br />
|44<br />
|R<br />
|'''Total kWh supplied 4th word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t) >> 48<br />
|}<br />
{| class="wikitable"<br />
|+Explanation<br />
|'''a'''<br />
|0 - C: charging;<br />
1 - B1: EV connected, authorization granted, waiting for EV to start charging;<br />
<br />
2 - B2: EV connected, authorization granted, was charging, not enough power;<br />
<br />
3 - B3: EV connected, authorization granted, wasn't charging, not enough power;<br />
<br />
4 - D1: EV connected, charging stopped by EV;<br />
<br />
5 - D2: EV connected, no authorization;<br />
<br />
6 - D3: EV connected, simplified CP or D state charging not allowed;<br />
<br />
7 - A: EV not connected; 8 - F: Error state; 9 - E: Unknown state.<br />
|-<br />
|'''b'''<br />
|0 – no EV connected;<br />
1 – vehicle connected, awaiting permission to charge;<br />
<br />
2 – charging authorized;<br />
<br />
3 – charging in progress;<br />
<br />
4 – charging paused;<br />
<br />
5 – charge successful (EV connected);<br />
<br />
6 – charge stopped by the user;<br />
<br />
7 – charging error;<br />
<br />
8 – charging station reserved, no EV connected;<br />
<br />
9 – other.<br />
|-<br />
|'''c'''<br />
|0 – A: no vehicle connected;<br />
1 – B1: EV connected, pending authorization, no PWM;<br />
<br />
2 – B2: EV connected, EVSE ready for charging, PWM active (state B2);<br />
<br />
3 – C1: ready to charge or stop charge request by EVSE, S2 closed, no PWM;<br />
<br />
4 – C2: charging EV;<br />
<br />
5 – D1: ready to charge or stop charge request by EVSE, S2 closed, ventilation required, no PWM;<br />
<br />
6 – D2: charging EV, ventilation required;<br />
<br />
7 – E: control pilot (CP) fault;<br />
<br />
8 – F: EVSE fault.<br />
|-<br />
|'''d'''<br />
|0 – midplate is open (HW-dependent);<br />
1 – temperature warning;<br />
<br />
2 – current draw is higher than allowed;<br />
<br />
3 – charging requires ventilation;<br />
<br />
4 – real time clock lost;<br />
<br />
5 – simplified cp sequence denied;<br />
<br />
6 – simplified cp sequence detected;<br />
<br />
7 – charging without ventilation denied;<br />
<br />
8 – PEN CT clamp not calibrated (HW-dependent);<br />
<br />
9 – NFC module fault;<br />
<br />
10 – PEN fault was detected (HW-dependent).<br />
|-<br />
|'''e'''<br />
|0 – input voltage not in range;<br />
1 – output voltage not in range;<br />
<br />
2 – current leakage sensor test failed;<br />
<br />
3 – EV diode is failed, or fault in CP line;<br />
<br />
4 – overcurrent error;<br />
<br />
5 – temperature error;<br />
<br />
6 – PEN fault active (UK HW only);<br />
<br />
7 – proximity pilot (cable, socket) error;<br />
<br />
8 – current leakage detected;<br />
<br />
9 – socket lock error;<br />
<br />
10 – internal error.<br />
|-<br />
|'''f'''<br />
|0 – Hardware limits;<br />
1 – Max power from grid;<br />
<br />
2 – User setting (static load balance);<br />
<br />
3 – Charging cable;<br />
<br />
4 – Simple CP sequence;<br />
<br />
5 – EVSE default settings;<br />
<br />
6 – Load balance;<br />
<br />
7 – Temperature.<br />
|}<br />
<br />
== SMARTSTUFF P1 CONVERTER ==<br />
The Modbus P1 Dongle is a device that enables communication between your EVC charging station and a smart meter using the Modbus RS-485 protocol. This setup is essential for accurately monitoring and controlling the energy usage during EV charging sessions.<br />
<br />
* Accurate energy monitoring: Ensures that energy usage data is correctly captured and transmitted.<br />
* Optimized charging: By leveraging the data from the smart meter, the charging station can optimize the charging process, potentially reducing costs and improving efficiency.<br />
<br />
''Note:'' Before proceeding with the installation, please ensure that your smart meter is compatible with the Modbus P1 Dongle.<br />
<br />
=== Smart Meter Connection ===<br />
The dongle is connected to the P1 port of the smart meter via a provided P1 cable. This connection allows the dongle to read energy consumption data directly from the smart meter.<br />
<br />
=== RS-485 Connection ===<br />
The dongle features RS-485 terminals which are critical for establishing communication with the EVC2 system. These terminals are usually labeled as Ground (GND), A+ (positive differential signal), and B- (negative differential signal).<br />
<br />
* To connect the dongle to the EVC2, you'll need to use an appropriate RS-485 cable.<br />
* Connect the 'A+' terminal of your cable to the 'A+' port on the EVC2 device.<br />
* Connect the 'B-' terminal of your cable to the 'B-' port on the EVC2 device.<br />
<br />
''Note :'' In case of communication errors, swapping the 'A+' and 'B-' connections might resolve the issue<br />
<br />
. [[File:EVC2 p1 LB.png|frameless|801x801px]]<blockquote>https://docs.smart-stuff.nl/p1-modbus-dongle/quick-start/installation</blockquote><br />
<br />
=== General meter settings ===<br />
According to your smart meter documentation, please enter all the settings into the Energy app as shown.<br />
<br />
# '''Energy meter type''': You need to select the type of smart meter (1-phase/3-phase). Please note that you can use a 1-phase charger even if the meter is 3-phase.<br />
# '''RS-485 baud rate''': To ensure optimal performance and compatibility with the P1 smart dongle, the RS-485 baud rate must be configured to 38400.<br />
# '''RS-485 parity/stop bit''': Similarly, this information can also be found in the meter settings. If the client is unable to find it, it is advisable to check the smart meter manual.<br />
<br />
{|<br />
|[[File:Smart_stuff.png|left|frameless]]<br />
|[[File:Live_data.png|left|frameless|457x457px]]<br />
|}<br />
{|<br />
|'''''Note:''''' ''Set up the energy meter address'' <br />
<br />
''according to the smart stuff address.''<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|'''''Note:''''' ''After successfully completing these steps,''<br />
<br />
please check the diagnostic live data from the energy meter.<br />
|}<br />
<br />
== TELTONIKA ENERGY APP SETTINGS ==<br />
To ensure everything works correctly, please apply the following setup :<br />
<br />
# Open user menu<br />
# Open "'''''Installer Menu'''''"<br />
# Open "'''''Dynamic Load Balancing'''''" menu<br />
# Enable "'''''Load Balancing'''''"<br />
# If smart meter is connected with RS485 wires, press "'''''Search For Device'''''"<br />
# *'''ONLY If TeltoCharge is unable''' to identify energy meter - use "'''''Manual Setup'''''"<br />
<br />
[[File:DLB_settings.png|frameless|1062x1062px]] <br />
__FORCETOC__</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=Dynamic_Load_Balancing_EVC2&diff=5478
Dynamic Load Balancing EVC2
2026-05-05T11:31:03Z
<p>KarolisS: /* Supported Modbus TCP/IP models */</p>
<hr />
<div><br />
= DYNAMIC LOAD BALANCING =<br />
EVC2 can communicate with a dedicated smart energy meter and adjust its power consumption based on the meter's readings. This functionality helps protect the home's electrical grid from overload during peak hours and optimizes energy usage to match the user's habits. The smart energy meter should always be installed in the main electrical cabinet, as shown below.<br />
[[File:Dynamic_Load_Balancing_Conection_Schematic.png|alt=|center|frameless|395x395px]]<br />
<br />
=== DLB support ===<br />
We can achieve DLB support by pairing the charger with one of the following:<br />
<br />
* [[Dynamic Load Balancing EVC2#MODBUS RTU METERS|Modbus RTU meters]]<br />
* [[Dynamic Load Balancing EVC2#MODBUS TCP/IP METERS|Modbus TCP/IP meters]]<br />
* [[Dynamic Load Balancing EVC2#CT CLAMPS|CT clamps]]<br />
* [[Dynamic Load Balancing EVC2#EXTERNAL CONTROL|External control]]<br />
* [[Dynamic Load Balancing EVC2#SMARTSTUFF P1 CONVERTER|Smartstuff P1 converter]]<br />
<br />
DLB can then be configured using the app following [[Dynamic Load Balancing EVC2#TELTONIKA ENERGY APP SETTINGS|these instructions]].<br />
<br />
== PHASE BALANCE EXPLANATION ==<br />
TeltoCharge has advanced functionality to detect a car's charging type and, if required, switch phases during mid-charge.<br />
<br />
The same phase switch process will happen if the smart meter detects, that less than 6A is available for one of the phases.<br />
<br />
=== Adaptation to the car's charging capability ===<br />
If the charger is set for 3phase charging, but the plugged car can only draw current from one phase, TeltoCharge will switch to one-phase mode after a short period of time<br />
<br />
[[File:CarExample.png|frameless|493x493px]]<br />
<br />
=== Phase balance during lack of power ===<br />
When the smart meter detects that there is less than 6A for each phase, the charging station will switch from 3phase mode to 1phase mode until 6ampers are available for all phases<br />
<br />
[[File:PhaseSwitch.png|frameless|600x600px]]<br />
<br />
== MODBUS RTU METERS ==<br />
To access energy measurement through Modbus RTU, connect both charger and the meter together using RS485 terminal for meter.<br />
<br />
[[File:DLB meter.png|frameless|808x808px]]<br />
<br />
=== RS485 communication ===<br />
For RS485 communication it is recommended to use a twister pair communication cable. Check example below.<br />
<br />
[[File:TeltoCharge_DLB_CableExample.png|frameless]]<br />
<br />
'''Note:''' ''Communication cable should be integrated with power cable.''<br />
<br />
In order to strive for wider applicability and compatibility, we constantly test and add new supported devices into list. All of the supported energy meters and schematics how to connect them are provided below. <br />
<br />
In order to make '''Dynamic load balancing''' and '''Solar''' functionality work, please always check:<br />
<br />
* if the '''wiring''' your Smart energy meter to EVC2 is right.<br />
* if the '''installer menu configuration''' in mobile application according to your smart energy meter is right.<br />
<br />
=== Supported Modbus RTU models ===<br />
{| class="wikitable" style="text-align: center; border: 1px solid #dddddd; font-family: arial, sans-serif; width: 60%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Energy meter manufacturer<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Technical information<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Configuration in mobile application<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Wiring scheme<br />
|-<br />
| style="padding: 2px;" |Carlo Gavazzi series 1-3 <br />
| style="padding: 2px;" |[[EM and ET models]] <br />
| style="padding: 2px;" |[[Carlo Gavazzi settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/view/EM_and_ET_models#Carlo_Gavazzi_meters_wiring: METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |Siemens PACxxxx <br />
| style="padding: 2px;" |[[PAC models]] <br />
| style="padding: 2px;" |[[Siemens settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/0/0e/Siemens_PAC_Sentron.png METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |ABB A4x ; B2x <br />
| style="padding: 2px;" |[[A and B models]] <br />
| style="padding: 2px;" |[[ABB settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/e/e8/ABB_serie_A%26B_part_1.png METER -> TELTOCHARGE]<br />
|-<br />
| style="padding: 2px;" |Eastron SDMxx <br />
| style="padding: 2px;" |[[SDM models]] <br />
| style="padding: 2px;" |[[Eastron settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/5/53/Eastron_sdm72.png METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |Inepro PRO380 <br />
| style="padding: 2px;" |[[PRO model]]<br />
| style="padding: 2px;" |[[Inepro settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/3/3b/Inepro_pro380.png METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |Chint <br />
| style="padding: 2px;" |[[Chint models]]<br />
| style="padding: 2px;" |[[Chint settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/3/3b/Inepro_pro380.png METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |Entes <br />
| style="padding: 2px;" |[[ES models]]<br />
| style="padding: 2px;" |[[Entes settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/2/21/Entes.png METER -> TELTOCHARGE]<br />
|-<br />
| style="padding: 2px;" |Acrel <br />
| style="padding: 2px;" |[[Acrel models]]<br />
| style="padding: 2px;" |[[Acrel settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/d/d1/Acrel_meter.png METER -> TELTOCHARGE] <br />
|-<br />
| colspan="4" style="padding: 8px;" |''More coming soon...''<br />
|}<br />
<br />
== LOAD BALANCING CONFIGURATION ==<br />
To ensure everything works correctly, please apply the following setup :<br />
<br />
# Open user menu<br />
# Open "'''''Installer Menu'''''"<br />
# Open "'''''Dynamic Load Balancing'''''" menu<br />
# Enable "'''''Load Balancing'''''"<br />
# If smart meter is connected with RS485 wires, press "'''''Search For Device'''''"<br />
# *'''ONLY If TeltoCharge is unable''' to identify energy meter - use "'''''Manual Setup'''''"<br />
<br />
[[File:DLB_settings.png|frameless|989x989px]]<br />
<br />
== MODBUS TCP/IP METERS ==<br />
To access energy measurement through Modbus TCP/IP, connect both the meter and your charger to your network. Charger has two options: either WiFi or ethernet cable. <br />
<br />
=== Connecting Shelly 3PRO ===<br />
Download the '''Shelly smart control''' app and setup the device to connect to your network. After its configured, find the IP address given to the meter.<br />
<br />
[[File:Shelly wiki.png|frameless|935x935px]]<br />
<br />
'''''Note:''' Copy the IP as it will be used in EV charging app to connect the meter to the station''<br />
<br />
=== Connecting HomeWizard P1 ===<br />
Follow this full guide for easy installation: [[Media:HomeWizard P1 guide.pdf|HomeWizard P1.pdf]]<br />
<br />
Or in short - install the HomeWizard meter to the P1 port of your utility meter.<br />
<br />
[[File:Wizard p1 utility meter.png|frameless|284x284px]]<br />
<br />
Download the '''HomeWizard''' app and follow the setup for the meter to connect to your network. After its configured, find the IP address given to the meter.<br />
[[File:Homewizard wiki 1.png|frameless]] [[File:Homewizard wiki 3.png|frameless|592x592px]]<br />
<br />
'''''Note:''' Copy the IP as it will be used in EV charging app to connect the meter to the station''<br />
<br />
=== Load balancing using Network meter ===<br />
A given example below is for Shelly 3Pro smart meter integration, but is identical when using HomeWizard P1.<br />
<br />
To connect the meter to the station, go to '''load balancing''' section in the app, choose '''network meter''' and the model you're using. <br />
<br />
[[File:Shelly DLB 1.png|frameless|938x938px]]<br />
<br />
After that select '''IP address''' as was shown in the Shelly app. Set '''max grid load''' to match the value allowed by the grid. If everything is done right - the status should indicate that the network meter has successfully connected.<br />
<br />
[[File:Shelly DLB 2.png|937x937px]]<br />
<br />
=== Supported Modbus TCP/IP models ===<br />
{| class="wikitable" style="text-align: center; border: 1px solid #dddddd; font-family: arial, sans-serif; width: 60%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Energy meter manufacturer<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Technical information<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Configuration in mobile application<br />
|-<br />
| style="padding: 2px;" |Shelly <br />
| style="padding: 2px;" |3em models <br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/view/Dynamic_Load_Balancing_EVC2#Connecting_Shelly_3PRO configuration page]<br />
|-<br />
| style="padding: 2px;" |Homewizard <br />
| style="padding: 2px;" |P1 models <br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/view/Dynamic_Load_Balancing_EVC2#Connecting_HomeWizard_P1 configuration page]<br />
|}<br />
<br />
== CT CLAMPS ==<br />
It is possible to measure power readings by connecting CT clamps to each phase. Insert each CT clamp to its dedicated terminal (blue wire to B, red wire to R slot of the terminal).<br />
<br />
<u>Make sure that clamp direction is pointing towards source (away from the charger).</u><br />
<br />
[[File:CT clamps EVC2.png|frameless|529x529px]]<br />
<br />
Recommended CT clamp specifications:<br />
<br />
* Rated input/current - depends on your total power input, but we would recommend not to exceed 150A.<br />
* Turn ratio - 3000:1.<br />
* Burden resistor - CT-Clamp '''must not have integrated burden resistor'''.<br />
<br />
<br />
Choosing to use CT clamp is done via the app in the '''Load balancing''' section. Set '''Max grid load''' to max available amps in your grid (for example: value of your breaker).<br />
<br />
Press calibrate to set the starting point.<br />
<br />
Note: Before calibration, CT clamp has to be connected to the port, but not clamped around the cable.<br />
<br />
[[File:Load balancing ct clamps.png|frameless|804x804px]]<br />
<br />
== EXTERNAL CONTROL ==<br />
This section provides an overview of the Modbus RTU interface supported by TeltoCharge electric vehicle supply equipment (EVSE). The document provides description of the available Modbus registers for the external control and communication with the charger based on a wired RS485 connection. This functionality is only available when the charger is configured as a secondary (server) device and waits for acceptable commands from the primary (client) device. The secondary device can operate on two modes:<br />
<br />
# It can be configured to use a watchdog for communication and if no valid communication is present after a configurable time interval, the charging (if ongoing) will stop and EVSE will not perform any charging until valid communication is reestablished;<br />
# the EVSE does not use a watchdog and continuous communication is not needed. As it is possible to change the EVSE settings by using the TeltoCharge mobile application, it is recommended for the primary device to read, compare, and change settings as needed based on user preferences and real-time requirements, ensuring a seamless and secure charging experience for electric vehicle owners. Continuous monitoring and adjustment of EVSE settings enable the primary device to stay synchronized with user inputs, maintain optimal charging conditions, and promptly respond to any changes initiated through the TeltoCharge mobile application, thereby enhancing overall efficiency and user satisfaction.<br />
<br />
=== Device preparation ===<br />
TeltoCharge must be configured as a secondary device via a TeltoCharge mobile application and device must have RS485 wired connection with the primary device..<br />
<br />
# Open "User menu"<br />
# Open "Installer menu"<br />
# Open "Load Management"<br />
# Select "Secondary"<br />
# Enable secondary device<br />
# Check if the address is expected in your system<br />
<br />
[[File:External.png|frameless|900x900px]] [[File:EVC2_external_controller.png|frameless|460x460px]]<br />
<br />
=== Modbus register map ===<br />
{| class="wikitable"<br />
!Address<br />
!Type<br />
!Name<br />
!Format<br />
!Values<br />
!Default value<br />
!Unit<br />
!Comment<br />
|-<br />
|0<br />
|R<br />
|'''Voltage L1'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|V<br />
|Input voltage on L1<br />
|-<br />
|1<br />
|R<br />
|'''Voltage L2'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|V<br />
|Input voltage on L2<br />
|-<br />
|2<br />
|R<br />
|'''Voltage L3'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|V<br />
|Input voltage on L2<br />
|-<br />
|3<br />
|R<br />
|'''Current L1'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|*10 A<br />
|Current on L1<br />
|-<br />
|4<br />
|R<br />
|'''Current L2'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|*10 A<br />
|Current on L2<br />
|-<br />
|5<br />
|R<br />
|'''Current L3'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|*10 A<br />
|Current on L3<br />
|-<br />
|6<br />
|R<br />
|'''EVSE status'''<br />
|uint16<br />
|0-9<br />
| -<br />
| -<br />
|Evse state in DLM (see "a" below)<br />
|-<br />
|7<br />
|R<br />
|'''EVSE status time 1st word'''<br />
|uint16<br />
| -32768 - 32767<br />
| -<br />
|s<br />
|Evse status time, first word (uint16_t)<br />
|-<br />
|8<br />
|R<br />
|'''EVSE status time 2nd word'''<br />
|uint16<br />
| -32768 - 32767<br />
| -<br />
|s<br />
|Evse status time, second word (uint16_t) >> 16<br />
|-<br />
|9<br />
|R<br />
|'''EVSE ID'''<br />
|uint16<br />
|21571<br />
|21571("TC")<br />
| -<br />
|Teltocharge ID<br />
|-<br />
|10<br />
|R<br />
|'''EVSE 3ph config'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - not possible, 1 - possible<br />
|-<br />
|11<br />
|R<br />
|'''Phase change'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - not possible, 1 - possible<br />
|-<br />
|12<br />
|R<br />
|'''Amp limit'''<br />
|uint16<br />
|0,6-32<br />
| -<br />
|A<br />
|Max amps the EVSE can supply<br />
|-<br />
|13<br />
|R<br />
|'''Phase connected'''<br />
|uint16<br />
|0-6<br />
| -<br />
| -<br />
|0 - L1,<br />
1 - L2, 2 - L3, 3 - L1/L2, 4 - L1/L3, 5 - L2/L3, 6 - 3ph 7 - none<br />
|-<br />
|14<br />
|R/W<br />
|'''Phase to use'''<br />
|uint16<br />
|0-7<br />
| -<br />
| -<br />
|Sets which phase to use for slave,<br />
0 - L1, 1 - L2, 2 - L3, 3 - L1/L2, 4 - L1/L3, 5 - L2/L3, 6 - 3ph, 7 - none<br />
|-<br />
|15<br />
|R/W<br />
|'''Amps to use'''<br />
|uint16<br />
|0, 6-32<br />
| -<br />
|A<br />
|Sets max allowed from primary to secondary<br />
|-<br />
|16<br />
|R/W<br />
|'''Request stop charging'''<br />
|uint16<br />
|0-2<br />
| -<br />
| -<br />
|Do not intervene with current session (0), stop session (1) or start session if stopped (2).<br />
|-<br />
|17<br />
|R/W<br />
|'''Request authorize'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|Request authorization<br />
|-<br />
|18<br />
|R/W<br />
|'''Lock/unlock socket'''<br />
|uint16<br />
|0-2<br />
|0<br />
| -<br />
|0 - auto lock,<br />
1 - always lock, 2 - force unlock in auto mode (resets on state A)<br />
|-<br />
|19<br />
|R/W<br />
|'''Communication timeout'''<br />
|uint16<br />
|0-600<br />
|30<br />
|s<br />
|Defines communication watchdog (0 - no req for periodic comm)<br />
|-<br />
|20<br />
|R/W<br />
|'''Failsafe current'''<br />
|uint16<br />
|0, 6-32<br />
|6<br />
|A<br />
|Defines max allowed current on comm timeout<br />
|-<br />
|21<br />
|R/W<br />
|'''Request reboot'''<br />
|uint16<br />
|0-1<br />
|0<br />
| -<br />
|Request reboot<br />
|-<br />
|22<br />
|R<br />
|'''Require authorization'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|Defines requirement for authorization<br />
|-<br />
|23<br />
|R<br />
|'''Product code'''<br />
|uint16<br />
|0-9999<br />
|1234<br />
| -<br />
|Product code EVCxxxx<br />
|-<br />
|24<br />
|R<br />
|'''Serial number 1st word'''<br />
|<br />
|0-65535<br />
|123456789<br />
|s<br />
|Serial number, first word (uint16_t)<br />
|-<br />
|25<br />
|R<br />
|'''Serial number 2nd word'''<br />
|<br />
|0-65535<br />
|<br />
|s<br />
|Serial number, second word (uint16_t) >> 16<br />
|-<br />
|26<br />
|R<br />
|'''FW version'''<br />
|uint16<br />
|11200-29999<br />
| -<br />
| -<br />
|FW version<br />
|-<br />
|27<br />
|R<br />
|'''Charge point state'''<br />
|uint16<br />
|0-9<br />
| -<br />
| -<br />
|Defines charge point state (see "b" below)<br />
|-<br />
|28<br />
|R<br />
|'''Max power from grid'''<br />
|uint16<br />
|6-1000<br />
|30<br />
| -<br />
|Defines max power from grid<br />
|-<br />
|29<br />
|R<br />
|'''User settable max current'''<br />
|uint16<br />
|6-32<br />
|10<br />
| -<br />
|Defines max settable current by user<br />
|-<br />
|30<br />
|R<br />
|'''Lock status'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - unlocked,<br />
1 - locked<br />
|-<br />
|31<br />
|R<br />
|'''Internal temperature'''<br />
|int16<br />
| -400 - +1250<br />
| -<br />
|*10°C<br />
|Device's temperature<br />
|-<br />
|32<br />
|R<br />
|'''OCPP connected'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - off,<br />
1 - on<br />
|-<br />
|33<br />
|R<br />
|'''IEC state'''<br />
|uint16<br />
|0-8<br />
| -<br />
| -<br />
|IEC state (see "c" below)<br />
|-<br />
|34<br />
|R<br />
|'''Warning code'''<br />
|uint16<br />
|0-65535<br />
| -<br />
| -<br />
|Warning code with bit positions (see "d" below)<br />
|-<br />
|35<br />
|R<br />
|'''Error code'''<br />
|uint16<br />
|0-65535<br />
| -<br />
| -<br />
|Error code with bit positions (see "e" below)<br />
|-<br />
|36<br />
|R<br />
|'''Current limit cause'''<br />
|uint16<br />
|0-8<br />
| -<br />
| -<br />
|Cause of current limit (see "f" below)<br />
|-<br />
|37<br />
|R<br />
|'''Max supported power'''<br />
|uint16<br />
|0-2<br />
| -<br />
| -<br />
|0 - 7.4 kW (1ph 32 A),<br />
1 - 11 kW (3ph 16 A), 2 - 22 kW (3ph 32 A)<br />
|-<br />
|38<br />
|R<br />
|'''Instant active power'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|W<br />
|Instant power<br />
|-<br />
|39<br />
|R<br />
|'''Energy delivered'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power per session<br />
|-<br />
|40<br />
|R<br />
|'''Session duration'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|s<br />
|Session duration<br />
|-<br />
|41<br />
|R<br />
|'''Total kWh supplied 1st word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t)<br />
|-<br />
|42<br />
|R<br />
|'''Total kWh supplied 2nd word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t) >> 16<br />
|-<br />
|43<br />
|R<br />
|'''Total kWh supplied 3rd word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t) >> 32<br />
|-<br />
|44<br />
|R<br />
|'''Total kWh supplied 4th word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t) >> 48<br />
|}<br />
{| class="wikitable"<br />
|+Explanation<br />
|'''a'''<br />
|0 - C: charging;<br />
1 - B1: EV connected, authorization granted, waiting for EV to start charging;<br />
<br />
2 - B2: EV connected, authorization granted, was charging, not enough power;<br />
<br />
3 - B3: EV connected, authorization granted, wasn't charging, not enough power;<br />
<br />
4 - D1: EV connected, charging stopped by EV;<br />
<br />
5 - D2: EV connected, no authorization;<br />
<br />
6 - D3: EV connected, simplified CP or D state charging not allowed;<br />
<br />
7 - A: EV not connected; 8 - F: Error state; 9 - E: Unknown state.<br />
|-<br />
|'''b'''<br />
|0 – no EV connected;<br />
1 – vehicle connected, awaiting permission to charge;<br />
<br />
2 – charging authorized;<br />
<br />
3 – charging in progress;<br />
<br />
4 – charging paused;<br />
<br />
5 – charge successful (EV connected);<br />
<br />
6 – charge stopped by the user;<br />
<br />
7 – charging error;<br />
<br />
8 – charging station reserved, no EV connected;<br />
<br />
9 – other.<br />
|-<br />
|'''c'''<br />
|0 – A: no vehicle connected;<br />
1 – B1: EV connected, pending authorization, no PWM;<br />
<br />
2 – B2: EV connected, EVSE ready for charging, PWM active (state B2);<br />
<br />
3 – C1: ready to charge or stop charge request by EVSE, S2 closed, no PWM;<br />
<br />
4 – C2: charging EV;<br />
<br />
5 – D1: ready to charge or stop charge request by EVSE, S2 closed, ventilation required, no PWM;<br />
<br />
6 – D2: charging EV, ventilation required;<br />
<br />
7 – E: control pilot (CP) fault;<br />
<br />
8 – F: EVSE fault.<br />
|-<br />
|'''d'''<br />
|0 – midplate is open (HW-dependent);<br />
1 – temperature warning;<br />
<br />
2 – current draw is higher than allowed;<br />
<br />
3 – charging requires ventilation;<br />
<br />
4 – real time clock lost;<br />
<br />
5 – simplified cp sequence denied;<br />
<br />
6 – simplified cp sequence detected;<br />
<br />
7 – charging without ventilation denied;<br />
<br />
8 – PEN CT clamp not calibrated (HW-dependent);<br />
<br />
9 – NFC module fault;<br />
<br />
10 – PEN fault was detected (HW-dependent).<br />
|-<br />
|'''e'''<br />
|0 – input voltage not in range;<br />
1 – output voltage not in range;<br />
<br />
2 – current leakage sensor test failed;<br />
<br />
3 – EV diode is failed, or fault in CP line;<br />
<br />
4 – overcurrent error;<br />
<br />
5 – temperature error;<br />
<br />
6 – PEN fault active (UK HW only);<br />
<br />
7 – proximity pilot (cable, socket) error;<br />
<br />
8 – current leakage detected;<br />
<br />
9 – socket lock error;<br />
<br />
10 – internal error.<br />
|-<br />
|'''f'''<br />
|0 – Hardware limits;<br />
1 – Max power from grid;<br />
<br />
2 – User setting (static load balance);<br />
<br />
3 – Charging cable;<br />
<br />
4 – Simple CP sequence;<br />
<br />
5 – EVSE default settings;<br />
<br />
6 – Load balance;<br />
<br />
7 – Temperature.<br />
|}<br />
<br />
== SMARTSTUFF P1 CONVERTER ==<br />
The Modbus P1 Dongle is a device that enables communication between your EVC charging station and a smart meter using the Modbus RS-485 protocol. This setup is essential for accurately monitoring and controlling the energy usage during EV charging sessions.<br />
<br />
* Accurate energy monitoring: Ensures that energy usage data is correctly captured and transmitted.<br />
* Optimized charging: By leveraging the data from the smart meter, the charging station can optimize the charging process, potentially reducing costs and improving efficiency.<br />
<br />
''Note:'' Before proceeding with the installation, please ensure that your smart meter is compatible with the Modbus P1 Dongle.<br />
<br />
=== Smart Meter Connection ===<br />
The dongle is connected to the P1 port of the smart meter via a provided P1 cable. This connection allows the dongle to read energy consumption data directly from the smart meter.<br />
<br />
=== RS-485 Connection ===<br />
The dongle features RS-485 terminals which are critical for establishing communication with the EVC2 system. These terminals are usually labeled as Ground (GND), A+ (positive differential signal), and B- (negative differential signal).<br />
<br />
* To connect the dongle to the EVC2, you'll need to use an appropriate RS-485 cable.<br />
* Connect the 'A+' terminal of your cable to the 'A+' port on the EVC2 device.<br />
* Connect the 'B-' terminal of your cable to the 'B-' port on the EVC2 device.<br />
<br />
''Note :'' In case of communication errors, swapping the 'A+' and 'B-' connections might resolve the issue<br />
<br />
. [[File:EVC2 p1 LB.png|frameless|801x801px]]<blockquote>https://docs.smart-stuff.nl/p1-modbus-dongle/quick-start/installation</blockquote><br />
<br />
=== General meter settings ===<br />
According to your smart meter documentation, please enter all the settings into the Energy app as shown.<br />
<br />
# '''Energy meter type''': You need to select the type of smart meter (1-phase/3-phase). Please note that you can use a 1-phase charger even if the meter is 3-phase.<br />
# '''RS-485 baud rate''': To ensure optimal performance and compatibility with the P1 smart dongle, the RS-485 baud rate must be configured to 38400.<br />
# '''RS-485 parity/stop bit''': Similarly, this information can also be found in the meter settings. If the client is unable to find it, it is advisable to check the smart meter manual.<br />
<br />
{|<br />
|[[File:Smart_stuff.png|left|frameless]]<br />
|[[File:Live_data.png|left|frameless|457x457px]]<br />
|}<br />
{|<br />
|'''''Note:''''' ''Set up the energy meter address'' <br />
<br />
''according to the smart stuff address.''<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|'''''Note:''''' ''After successfully completing these steps,''<br />
<br />
please check the diagnostic live data from the energy meter.<br />
|}<br />
<br />
== TELTONIKA ENERGY APP SETTINGS ==<br />
To ensure everything works correctly, please apply the following setup :<br />
<br />
# Open user menu<br />
# Open "'''''Installer Menu'''''"<br />
# Open "'''''Dynamic Load Balancing'''''" menu<br />
# Enable "'''''Load Balancing'''''"<br />
# If smart meter is connected with RS485 wires, press "'''''Search For Device'''''"<br />
# *'''ONLY If TeltoCharge is unable''' to identify energy meter - use "'''''Manual Setup'''''"<br />
<br />
[[File:DLB_settings.png|frameless|1062x1062px]] <br />
__FORCETOC__</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=TeltoCharge_product_codes_EVC2&diff=5477
TeltoCharge product codes EVC2
2026-04-30T12:15:49Z
<p>KarolisS: </p>
<hr />
<div><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
Here you can find information about '''Product code structure''' of EVC2 devices<br />
{| class="wikitable"<br />
!Product code<br />
!Output type<br />
!Name<br />
!Description<br />
|-<br />
|'''EVC2000100S0'''<br />
|Socket<br />
|EVC 2 - 7.4kW/ 1P/ Socket Type2/GSM<br />
|Product: EVC2<br />
Region: Global<br />
Connection: Socket;<br />
Power: 7,4 kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2<br />
Front panel: No panel;<br />
Packaging: box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, metal bracket.<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2001100S0'''<br />
|Socket<br />
|EVC 2 - 11 kW / 3Ph / Type 2 socket /GSM<br />
|Product: EVC2;<br />
Region: Global;<br />
Connection: Socket;<br />
Power: 11 kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type2 socket (IPXXD);<br />
Front panel: No panel;<br />
Packaging: Protective box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, metal bracket;<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2002100S0'''<br />
|Socket<br />
|EVC 2 - 22kW/ 3P/ Type 2 socket/ GSM<br />
|Product: EVC2;<br />
Region: Global;<br />
Connection: Socket;<br />
Power: 22kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2 socket;<br />
Front panel: No panel;<br />
Packaging: Protective box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, CT clamps, metal bracket.<br />
Additional info: Product use CR1220 battery<br />
|-<br />
|'''EVC2000110S0'''<br />
|Socket with shutter<br />
|EVC 2 - 7,4kW/ 1P/ Socket with Shutter Type2/GSM<br />
|Product: EVC2<br />
Region: Global<br />
Connection: Shutter;<br />
Power: 7,4 kW;<br />
GSM: EG91-EX modem;<br />
Output Type: Type 2 Shutter<br />
Front panel: No panel;<br />
Packaging: box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, metal bracket.<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2001110S0'''<br />
|Socket with shutter<br />
|EVC 2 - 11 kW / 3Ph / Type 2 socket with shutter / GSM<br />
|Product: EVC2;<br />
Region: Global;<br />
Connection: Socket with shutter;<br />
Power: 11 kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2 socket with shutter;<br />
Front panel: No panel;<br />
Packaging: Protective box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, metal bracket;<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2002110S0'''<br />
|Socket with shutter<br />
|EVC 2 - 22kW/ 3P/ Type 2 socket with shutter/ GSM<br />
|Product: EVC2;<br />
Region: Global;<br />
Connection: Socket with shutter;<br />
Power: 22kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2 socket with shutter;<br />
Front panel: No panel;<br />
Packaging: Protective box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, CT clamps, metal bracket;<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2000120S0'''<br />
|Cable (5m)<br />
|EVC 2 - 7,4kW/ 1P/ Type 2 (5m cable)/ GSM<br />
|Product: EVC2<br />
Region: Global<br />
Connection: Cable;<br />
Power: 7.4 kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2, 5 meter cable;<br />
Front panel: No panel;<br />
Packaging: box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, metal bracket.<br />
Additional Equipment for CABLE VERSION: Type 2 cable holder;<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2001120S0'''<br />
|Cable (5m)<br />
|EVC 2 - 11kW/ 3P/ Type 2 cable / GSM<br />
|Product: EVC2<br />
Region: Global<br />
Connection: Cable;<br />
Power: 11 kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2, 5 meter cable;<br />
Front panel: No panel;<br />
Packaging: box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, metal bracket.<br />
Additional Equipment for CABLE VERSION: Type 2 cable holder;<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2002120S0'''<br />
|Cable (5m)<br />
|EVC 2 - 22kW/ 3P/ 5m Type 2 cable /GSM<br />
|Product: EVC2<br />
Region: Global<br />
Connection: Cable;<br />
Power: 22kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2, 5 meter cable;<br />
Front panel: No panel;<br />
Packaging: box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, CT clamps, metal bracket.<br />
Additional Equipment for CABLE VERSION: Type 2 cable holder;<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2000130S0'''<br />
|Cable (7.5m)<br />
|EVC 2 - 7.4 kW/ 1P/ Type 2 cable (7.5m) / GSM<br />
|Product: EVC2<br />
Region: Global<br />
Connection: Cable;<br />
Power: 7.4 kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2, 7.5 meter cable;<br />
Front panel: No panel;<br />
Packaging: box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, metal bracket.<br />
Additional Equipment for CABLE VERSION: Type 2 cable holder;<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2001130S0'''<br />
|Cable (7.5m)<br />
|EVC 2 - 11 kW/ 3P/ Type 2 cable (7.5m) / GSM<br />
|Product: EVC2<br />
Region: Global<br />
Connection: Cable;<br />
Power: 11 kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2, 7.5 meter cable;<br />
Front panel: No panel;<br />
Packaging: box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, metal bracket.<br />
Additional Equipment for CABLE VERSION: Type 2 cable holder;<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2002130S0'''<br />
|Cable (7.5m)<br />
|EVC 2 - 22 kW/ 3P/ Type 2 cable (7.5m) / GSM<br />
|Product: EVC2<br />
Region: Global<br />
Connection: Cable;<br />
Power: 22 kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2, 7.5 meter cable;<br />
Front panel: No panel;<br />
Packaging: box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, metal bracket.<br />
Additional Equipment for CABLE VERSION: Type 2 cable holder;<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2000100UK'''<br />
|Socket<br />
|EVC 2 - 7.4kW/ 1P/ Socket Type2/GSM<br />
|Product: EVC2<br />
Region: Global UK;<br />
Connection: Socket;<br />
Power: 7,4 kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2<br />
Front panel: No panel;<br />
Packaging: box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, metal bracket.<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2002100UK'''<br />
|Socket<br />
|EVC 2 - 22kW/ 3P/ Type 2 socket/ GSM<br />
|Product: EVC2;<br />
Region: Global UK;<br />
Connection: Socket;<br />
Power: 22kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2 socket;<br />
Front panel: No panel;<br />
Packaging: Protective box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, CT clamps, metal bracket.<br />
Additional info: Product use CR1220 battery<br />
|-<br />
|'''EVC2000120UK'''<br />
|Cable (5m)<br />
|EVC 2 - 7,4kW/ 1P/ Type 2 (5m cable)/ GSM<br />
|Product: EVC2<br />
Region: Global UK;<br />
Connection: Cable;<br />
Power: 7.4 kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2, 5 meter cable;<br />
Front panel: No panel;<br />
Packaging: box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, metal bracket.<br />
Additional Equipment for CABLE VERSION: Type 2 cable holder;<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2002120UK'''<br />
|Cable (5m)<br />
|EVC 2 - 22kW/ 3P/ 5m Type 2 cable /GSM<br />
|Product: EVC2<br />
Region: Global UK;<br />
Connection: Cable;<br />
Power: 22kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2, 5 meter cable;<br />
Front panel: No panel;<br />
Packaging: box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, CT clamps, metal bracket.<br />
Additional Equipment for CABLE VERSION: Type 2 cable holder;<br />
Additional info: Product use CR1220 battery;<br />
|}<br />
<ul style="list-style-type: none; margin: 0; padding: 0;">[[Category: Product guides]]</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=TeltoCharge_product_codes_EVC2&diff=5476
TeltoCharge product codes EVC2
2026-04-30T12:15:10Z
<p>KarolisS: </p>
<hr />
<div><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
Here you can find information about '''Product code structure''' of TeltoCharge Global.<br />
<br><br />
{| class="wikitable"<br />
!Product code<br />
!Output type<br />
!Name<br />
!Description<br />
|-<br />
|'''EVC2000100S0'''<br />
|Socket<br />
|EVC 2 - 7.4kW/ 1P/ Socket Type2/GSM<br />
|Product: EVC2<br />
Region: Global<br />
Connection: Socket;<br />
Power: 7,4 kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2<br />
Front panel: No panel;<br />
Packaging: box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, metal bracket.<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2001100S0'''<br />
|Socket<br />
|EVC 2 - 11 kW / 3Ph / Type 2 socket /GSM<br />
|Product: EVC2;<br />
Region: Global;<br />
Connection: Socket;<br />
Power: 11 kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type2 socket (IPXXD);<br />
Front panel: No panel;<br />
Packaging: Protective box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, metal bracket;<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2002100S0'''<br />
|Socket<br />
|EVC 2 - 22kW/ 3P/ Type 2 socket/ GSM<br />
|Product: EVC2;<br />
Region: Global;<br />
Connection: Socket;<br />
Power: 22kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2 socket;<br />
Front panel: No panel;<br />
Packaging: Protective box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, CT clamps, metal bracket.<br />
Additional info: Product use CR1220 battery<br />
|-<br />
|'''EVC2000110S0'''<br />
|Socket with shutter<br />
|EVC 2 - 7,4kW/ 1P/ Socket with Shutter Type2/GSM<br />
|Product: EVC2<br />
Region: Global<br />
Connection: Shutter;<br />
Power: 7,4 kW;<br />
GSM: EG91-EX modem;<br />
Output Type: Type 2 Shutter<br />
Front panel: No panel;<br />
Packaging: box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, metal bracket.<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2001110S0'''<br />
|Socket with shutter<br />
|EVC 2 - 11 kW / 3Ph / Type 2 socket with shutter / GSM<br />
|Product: EVC2;<br />
Region: Global;<br />
Connection: Socket with shutter;<br />
Power: 11 kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2 socket with shutter;<br />
Front panel: No panel;<br />
Packaging: Protective box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, metal bracket;<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2002110S0'''<br />
|Socket with shutter<br />
|EVC 2 - 22kW/ 3P/ Type 2 socket with shutter/ GSM<br />
|Product: EVC2;<br />
Region: Global;<br />
Connection: Socket with shutter;<br />
Power: 22kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2 socket with shutter;<br />
Front panel: No panel;<br />
Packaging: Protective box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, CT clamps, metal bracket;<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2000120S0'''<br />
|Cable (5m)<br />
|EVC 2 - 7,4kW/ 1P/ Type 2 (5m cable)/ GSM<br />
|Product: EVC2<br />
Region: Global<br />
Connection: Cable;<br />
Power: 7.4 kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2, 5 meter cable;<br />
Front panel: No panel;<br />
Packaging: box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, metal bracket.<br />
Additional Equipment for CABLE VERSION: Type 2 cable holder;<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2001120S0'''<br />
|Cable (5m)<br />
|EVC 2 - 11kW/ 3P/ Type 2 cable / GSM<br />
|Product: EVC2<br />
Region: Global<br />
Connection: Cable;<br />
Power: 11 kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2, 5 meter cable;<br />
Front panel: No panel;<br />
Packaging: box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, metal bracket.<br />
Additional Equipment for CABLE VERSION: Type 2 cable holder;<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2002120S0'''<br />
|Cable (5m)<br />
|EVC 2 - 22kW/ 3P/ 5m Type 2 cable /GSM<br />
|Product: EVC2<br />
Region: Global<br />
Connection: Cable;<br />
Power: 22kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2, 5 meter cable;<br />
Front panel: No panel;<br />
Packaging: box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, CT clamps, metal bracket.<br />
Additional Equipment for CABLE VERSION: Type 2 cable holder;<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2000130S0'''<br />
|Cable (7.5m)<br />
|EVC 2 - 7.4 kW/ 1P/ Type 2 cable (7.5m) / GSM<br />
|Product: EVC2<br />
Region: Global<br />
Connection: Cable;<br />
Power: 7.4 kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2, 7.5 meter cable;<br />
Front panel: No panel;<br />
Packaging: box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, metal bracket.<br />
Additional Equipment for CABLE VERSION: Type 2 cable holder;<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2001130S0'''<br />
|Cable (7.5m)<br />
|EVC 2 - 11 kW/ 3P/ Type 2 cable (7.5m) / GSM<br />
|Product: EVC2<br />
Region: Global<br />
Connection: Cable;<br />
Power: 11 kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2, 7.5 meter cable;<br />
Front panel: No panel;<br />
Packaging: box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, metal bracket.<br />
Additional Equipment for CABLE VERSION: Type 2 cable holder;<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2002130S0'''<br />
|Cable (7.5m)<br />
|EVC 2 - 22 kW/ 3P/ Type 2 cable (7.5m) / GSM<br />
|Product: EVC2<br />
Region: Global<br />
Connection: Cable;<br />
Power: 22 kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2, 7.5 meter cable;<br />
Front panel: No panel;<br />
Packaging: box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, metal bracket.<br />
Additional Equipment for CABLE VERSION: Type 2 cable holder;<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2000100UK'''<br />
|Socket<br />
|EVC 2 - 7.4kW/ 1P/ Socket Type2/GSM<br />
|Product: EVC2<br />
Region: Global UK;<br />
Connection: Socket;<br />
Power: 7,4 kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2<br />
Front panel: No panel;<br />
Packaging: box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, metal bracket.<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2002100UK'''<br />
|Socket<br />
|EVC 2 - 22kW/ 3P/ Type 2 socket/ GSM<br />
|Product: EVC2;<br />
Region: Global UK;<br />
Connection: Socket;<br />
Power: 22kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2 socket;<br />
Front panel: No panel;<br />
Packaging: Protective box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, CT clamps, metal bracket.<br />
Additional info: Product use CR1220 battery<br />
|-<br />
|'''EVC2000120UK'''<br />
|Cable (5m)<br />
|EVC 2 - 7,4kW/ 1P/ Type 2 (5m cable)/ GSM<br />
|Product: EVC2<br />
Region: Global UK;<br />
Connection: Cable;<br />
Power: 7.4 kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2, 5 meter cable;<br />
Front panel: No panel;<br />
Packaging: box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, metal bracket.<br />
Additional Equipment for CABLE VERSION: Type 2 cable holder;<br />
Additional info: Product use CR1220 battery;<br />
|-<br />
|'''EVC2002120UK'''<br />
|Cable (5m)<br />
|EVC 2 - 22kW/ 3P/ 5m Type 2 cable /GSM<br />
|Product: EVC2<br />
Region: Global UK;<br />
Connection: Cable;<br />
Power: 22kW;<br />
GSM: EG915U-EU modem;<br />
Output Type: Type 2, 5 meter cable;<br />
Front panel: No panel;<br />
Packaging: box, packing box, insert;<br />
Standard Equipment: NFC card+tag, installation manual (Global region), wall plugs, selft-taping screws, screws, internet cable seal, additional seals, cable lugs, CT clamps, metal bracket.<br />
Additional Equipment for CABLE VERSION: Type 2 cable holder;<br />
Additional info: Product use CR1220 battery;<br />
|}<br />
<ul style="list-style-type: none; margin: 0; padding: 0;">[[Category: Product guides]]</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=TeltoCharge_product_codes_EVC2&diff=5475
TeltoCharge product codes EVC2
2026-04-30T12:11:55Z
<p>KarolisS: </p>
<hr />
<div><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
Here you can find information about '''Product code structure''' of TeltoCharge Global.<br />
<br><br />
{| class="wikitable" style="text-align: center; border: 1px solid #414042; font-family: arial, sans-serif; width: 100%;"<br />
|-<br />
! style="background-color: #0054A6; color:#F1F2F4; padding: 8px; font-size: 25px;" | Product group<br />
! style="background-color: #0054A6; color:#F1F2F4; padding: 8px; font-size: 25px;" | Product code<br />
! style="background-color: #0054A6; color:#F1F2F4; padding: 8px; font-size: 25px;" | Front plate color<br />
! style="background-color: #0054A6; color:#F1F2F4; padding: 8px; font-size: 25px;" | Charging capacity<br />
! style="background-color: #0054A6; color:#F1F2F4; padding: 8px; font-size: 25px;" | Output<br />
! style="background-color: #0054A6; color:#F1F2F4; padding: 8px; font-size: 25px;" | Modem<br />
|-<br />
| style="padding: 8px; color: #20C0D7; font-size: 20px;" | '''EVC100'''<br />
| style="padding: 8px;" | EVC1000P4011<br />
| style="padding: 8px;" | Slate grey<br />
| style="padding: 8px;" | 7.4 Kw<br />
| style="padding: 8px;" | type 2 socket<br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px; color: #20C0D7; font-size: 20px;"" rowspan="2" | '''EVC101'''<br />
| style="padding: 8px;" | EVC1010P1000<br />
| style="padding: 8px;" | Slate grey<br />
| style="padding: 8px;" | 7.4 kW<br />
| style="padding: 8px;" | type 2 cable (5m)<br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px;" | EVC1010W1011<br />
| style="padding: 8px;" | Wooden<br />
| style="padding: 8px;" | 7.4 kW<br />
| style="padding: 8px;" | type 2 cable (5m)<br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px; color: #20C0D7; font-size: 20px;" | '''EVC110'''<br />
| style="padding: 8px;" | EVC1100P4011<br />
| style="padding: 8px;" | Slate grey<br />
| style="padding: 8px;" | 11 Kw<br />
| style="padding: 8px;" | type 2 socket<br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px; color: #20C0D7; font-size: 20px;" rowspan="2" | '''EVC111'''<br />
| style="padding: 8px;" | EVC1110P1000<br />
| style="padding: 8px;" | Slate grey<br />
| style="padding: 8px;" | 11 kW<br />
| style="padding: 8px;" | type 2 cable (5m)<br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px;" | EVC1110W1011<br />
| style="padding: 8px;" | Wooden<br />
| style="padding: 8px;" | 11 kW<br />
| style="padding: 8px;" | type 2 cable (5m)<br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px; color: #20C0D7; font-size: 20px;" rowspan="2" | '''EVC120'''<br />
| style="padding: 8px;" | EVC1200P4011<br />
| style="padding: 8px;" | Slate grey<br />
| style="padding: 8px;" | 22 kW<br />
| style="padding: 8px;" | type 2 socket <br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px;" | EVC1201P4011<br />
| style="padding: 8px;" | Slate grey<br />
| style="padding: 8px;" | 22 kW<br />
| style="padding: 8px;" | type 2 socket <br />
| style="padding: 8px;" | Quectel EG91-EX modem<br />
|-<br />
| style="padding: 8px; color: #20C0D7; font-size: 20px;" rowspan="4" | '''EVC121'''<br />
| style="padding: 8px;" | EVC1210P1000<br />
| style="padding: 8px;" | Slate grey<br />
| style="padding: 8px;" | 22 kW<br />
| style="padding: 8px;" | type 2 cable (5m)<br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px;" | EVC1210W1011<br />
| style="padding: 8px;" | Wooden<br />
| style="padding: 8px;" | 22 kW<br />
| style="padding: 8px;" | type 2 cable (5m)<br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px;" | EVC1211P1000<br />
| style="padding: 8px;" | Slate grey<br />
| style="padding: 8px;" | 22 kW<br />
| style="padding: 8px;" | type 2 cable (5m)<br />
| style="padding: 8px;" | Quectel EG91-EX modem<br />
|-<br />
| style="padding: 8px;" | EVC1211W1011<br />
| style="padding: 8px;" | Wooden<br />
| style="padding: 8px;" | 22 kW<br />
| style="padding: 8px;" | type 2 cable (5m)<br />
| style="padding: 8px;" | Quectel EG91-EX modem<br />
|-<br />
| style="padding: 8px; color: #20C0D7; font-size: 20px;" rowspan="2" | '''EVC160'''<br />
| style="padding: 8px;" | EVC160400001<br />
| style="padding: 8px;" | Not included<br />
| style="padding: 8px;" | 7.4 kW + CT<br />
| style="padding: 8px;" | type 2 socket<br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px;" | EVC160500001<br />
| style="padding: 8px;" | Not included<br />
| style="padding: 8px;" | 7.4 kW + CT<br />
| style="padding: 8px;" | type 2 socket<br />
| style="padding: 8px;" | Quectel EG91-EX modem<br />
|-<br />
| style="padding: 8px; color: #20C0D7; font-size: 20px;" rowspan="4" | '''EVC161'''<br />
| style="padding: 8px;" | EVC161400001<br />
| style="padding: 8px;" | Not included<br />
| style="padding: 8px;" | 7.4 kW + CT<br />
| style="padding: 8px;" | type 2 cable (5m)<br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px;" | EVC161500001<br />
| style="padding: 8px;" | Not included<br />
| style="padding: 8px;" | 7.4 kW + CT<br />
| style="padding: 8px;" | type 2 cable (5m)<br />
| style="padding: 8px;" | Quectel EG91-EX modem<br />
|-<br />
| style="padding: 8px;" | EVC161400401<br />
| style="padding: 8px;" | Not included<br />
| style="padding: 8px;" | 7.4 kW + CT<br />
| style="padding: 8px;" | GB/T cable (5m)<br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px;" | EVC161500401<br />
| style="padding: 8px;" | Not included<br />
| style="padding: 8px;" | 7.4 kW + CT<br />
| style="padding: 8px;" | GB/T cable (5m)<br />
| style="padding: 8px;" | Quectel EG91-EX modem<br />
|-<br />
|}<br />
<br />
[[Category: Product guides]]</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=TeltoCharge_product_codes_EVC2&diff=5474
TeltoCharge product codes EVC2
2026-04-30T12:09:39Z
<p>KarolisS: Created page with " <ul style="list-style-type: none; margin: 0; padding: 0;"> Here you can find information about '''Product code structure''' of EVC2 <br> {| class="wikitable" style="text-align: center; border: 1px solid #414042; font-family: arial, sans-serif; width: 100%;" |- ! style="background-color: #0054A6; color:#F1F2F4; padding: 8px; font-size: 25px;" | Product group ! style="background-color: #0054A6; color:#F1F2F4; padding: 8px; font-size: 25px;" | Product code ! style="backgro..."</p>
<hr />
<div><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
Here you can find information about '''Product code structure''' of EVC2<br />
<br><br />
{| class="wikitable" style="text-align: center; border: 1px solid #414042; font-family: arial, sans-serif; width: 100%;"<br />
|-<br />
! style="background-color: #0054A6; color:#F1F2F4; padding: 8px; font-size: 25px;" | Product group<br />
! style="background-color: #0054A6; color:#F1F2F4; padding: 8px; font-size: 25px;" | Product code<br />
! style="background-color: #0054A6; color:#F1F2F4; padding: 8px; font-size: 25px;" | Front plate color<br />
! style="background-color: #0054A6; color:#F1F2F4; padding: 8px; font-size: 25px;" | Charging capacity<br />
! style="background-color: #0054A6; color:#F1F2F4; padding: 8px; font-size: 25px;" | Output<br />
! style="background-color: #0054A6; color:#F1F2F4; padding: 8px; font-size: 25px;" | Modem<br />
|-<br />
| style="padding: 8px; color: #20C0D7; font-size: 20px;" | '''EVC100'''<br />
| style="padding: 8px;" | EVC1000P4011<br />
| style="padding: 8px;" | Slate grey<br />
| style="padding: 8px;" | 7.4 Kw<br />
| style="padding: 8px;" | type 2 socket<br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px; color: #20C0D7; font-size: 20px;"" rowspan="2" | '''EVC101'''<br />
| style="padding: 8px;" | EVC1010P1000<br />
| style="padding: 8px;" | Slate grey<br />
| style="padding: 8px;" | 7.4 kW<br />
| style="padding: 8px;" | type 2 cable (5m)<br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px;" | EVC1010W1011<br />
| style="padding: 8px;" | Wooden<br />
| style="padding: 8px;" | 7.4 kW<br />
| style="padding: 8px;" | type 2 cable (5m)<br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px; color: #20C0D7; font-size: 20px;" | '''EVC110'''<br />
| style="padding: 8px;" | EVC1100P4011<br />
| style="padding: 8px;" | Slate grey<br />
| style="padding: 8px;" | 11 Kw<br />
| style="padding: 8px;" | type 2 socket<br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px; color: #20C0D7; font-size: 20px;" rowspan="2" | '''EVC111'''<br />
| style="padding: 8px;" | EVC1110P1000<br />
| style="padding: 8px;" | Slate grey<br />
| style="padding: 8px;" | 11 kW<br />
| style="padding: 8px;" | type 2 cable (5m)<br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px;" | EVC1110W1011<br />
| style="padding: 8px;" | Wooden<br />
| style="padding: 8px;" | 11 kW<br />
| style="padding: 8px;" | type 2 cable (5m)<br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px; color: #20C0D7; font-size: 20px;" rowspan="2" | '''EVC120'''<br />
| style="padding: 8px;" | EVC1200P4011<br />
| style="padding: 8px;" | Slate grey<br />
| style="padding: 8px;" | 22 kW<br />
| style="padding: 8px;" | type 2 socket <br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px;" | EVC1201P4011<br />
| style="padding: 8px;" | Slate grey<br />
| style="padding: 8px;" | 22 kW<br />
| style="padding: 8px;" | type 2 socket <br />
| style="padding: 8px;" | Quectel EG91-EX modem<br />
|-<br />
| style="padding: 8px; color: #20C0D7; font-size: 20px;" rowspan="4" | '''EVC121'''<br />
| style="padding: 8px;" | EVC1210P1000<br />
| style="padding: 8px;" | Slate grey<br />
| style="padding: 8px;" | 22 kW<br />
| style="padding: 8px;" | type 2 cable (5m)<br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px;" | EVC1210W1011<br />
| style="padding: 8px;" | Wooden<br />
| style="padding: 8px;" | 22 kW<br />
| style="padding: 8px;" | type 2 cable (5m)<br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px;" | EVC1211P1000<br />
| style="padding: 8px;" | Slate grey<br />
| style="padding: 8px;" | 22 kW<br />
| style="padding: 8px;" | type 2 cable (5m)<br />
| style="padding: 8px;" | Quectel EG91-EX modem<br />
|-<br />
| style="padding: 8px;" | EVC1211W1011<br />
| style="padding: 8px;" | Wooden<br />
| style="padding: 8px;" | 22 kW<br />
| style="padding: 8px;" | type 2 cable (5m)<br />
| style="padding: 8px;" | Quectel EG91-EX modem<br />
|-<br />
| style="padding: 8px; color: #20C0D7; font-size: 20px;" rowspan="2" | '''EVC160'''<br />
| style="padding: 8px;" | EVC160400001<br />
| style="padding: 8px;" | Not included<br />
| style="padding: 8px;" | 7.4 kW + CT<br />
| style="padding: 8px;" | type 2 socket<br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px;" | EVC160500001<br />
| style="padding: 8px;" | Not included<br />
| style="padding: 8px;" | 7.4 kW + CT<br />
| style="padding: 8px;" | type 2 socket<br />
| style="padding: 8px;" | Quectel EG91-EX modem<br />
|-<br />
| style="padding: 8px; color: #20C0D7; font-size: 20px;" rowspan="4" | '''EVC161'''<br />
| style="padding: 8px;" | EVC161400001<br />
| style="padding: 8px;" | Not included<br />
| style="padding: 8px;" | 7.4 kW + CT<br />
| style="padding: 8px;" | type 2 cable (5m)<br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px;" | EVC161500001<br />
| style="padding: 8px;" | Not included<br />
| style="padding: 8px;" | 7.4 kW + CT<br />
| style="padding: 8px;" | type 2 cable (5m)<br />
| style="padding: 8px;" | Quectel EG91-EX modem<br />
|-<br />
| style="padding: 8px;" | EVC161400401<br />
| style="padding: 8px;" | Not included<br />
| style="padding: 8px;" | 7.4 kW + CT<br />
| style="padding: 8px;" | GB/T cable (5m)<br />
| style="padding: 8px;" | -<br />
|-<br />
| style="padding: 8px;" | EVC161500401<br />
| style="padding: 8px;" | Not included<br />
| style="padding: 8px;" | 7.4 kW + CT<br />
| style="padding: 8px;" | GB/T cable (5m)<br />
| style="padding: 8px;" | Quectel EG91-EX modem<br />
|-<br />
|}<br />
<br />
[[Category: Product guides]]</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=Main_Page_EVC2&diff=5473
Main Page EVC2
2026-04-30T11:46:37Z
<p>KarolisS: </p>
<hr />
<div>=General information=<br />
<br><br />
<div style="background-color: #f2f2f2; padding: 20px;"> <br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[General information]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<ul><br />
<li>[[General Specifications EVC2|General Specifications]]</li><br />
<li>[[EVC_2_Datasheets|Datasheet]]</li><br />
<li>[[Electrical Specifications EVC2|Electrical Specifications]]</li><br />
<li>[[Warranty/EVC2|Warranty]]</li><br />
<li>[[Compliance documentation EVC2|Compliance documentation]]<br />
</ul><br />
<br />
<br />
<div style="background-color: #f2f2f2; padding: 0px;"> <br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[Getting Started]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<br />
<ul style="list-style-type: disc; margin-left: 20px; padding: 0;"><br />
<li>[[First Start Guide EVC2|First Start Guide]]</li><br />
<li>[[Media:EVC200_installation_manual_shortened.pdf|Physical installation process]]</li><br />
<li>[[Media:EVC200 Installation manual V.10.200.pdf|Installation Manual]]</li><br />
<li>[[Quick user guide of mobile application EVC2|Quick user guide of mobile application]]</li><br />
</ul><br />
<br />
<br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 0px; text-align: center;">[[Product guides]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<ul><br />
<li>[[Functionalities EVC2|Functionalities]]</li><br />
<li>[[Troubleshooting Guide EVC2|Troubleshooting Guide]]</li><br />
<li>[[TeltoCharge product codes EVC2|Product numbers - what to order?]]</li><br />
</ul><br />
<br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 0px; text-align: center;">[[Accessories]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<ul><br />
<li>[[EVC2 P1 dongle|P1 dongle]]</li><br />
<li>[[EVC2 Modbus TCP meters|Modbus TCP meters]]</li><br />
<li>[[EVC2 Modbus RTU meters|Modbus RTU meters]]</li><br />
<li>[[EVC2 CT clamps|CT clamps]]</li><br />
<li>[[EVC2 single/double poles|Single and double mounting poles]]</li><br />
<li>[[EVC2 quadruple mounting poles|Quadruple mounting pole]]</li><br />
<li>[[EVC2 cable holder|Cable holder]]</li><br />
<li>[[EVC2 nfc card pack|NFC card pack]]</li><br />
<li>[[EVC2 RCBO|RCBO device]]</li><br />
<li>[[EVC2 frontplates|Frontplates]]</li><br />
</ul><br />
<br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[Advanced Topics]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<ul><br />
<li>[[Potential free contact|'''NEW:''' Potential free contact]]</li><br />
<li>[[Power Selector Switch|'''NEW:''' Power Selector Switch]]</li><br />
<li>[[Restart button|'''NEW:''' Button functionality]]</li><br />
<li>[[2x RS458 support|'''NEW:'''2x:RS485 ports for DLM & MID]]</li><br />
<li>[[Dynamic Load Balancing EVC2|Dynamic Load Balancing]]</li><br />
&rarr;[[Dynamic Load Balancing EVC2#SMART METER AND TELTOCHARGE COMMUNICATION|DLB with Smart meters]]<br><br />
&rarr; &rarr;[[Dynamic Load Balancing EVC2#MODBUS RTU METERS|Modbus RTU meters]]<br><br />
&rarr; &rarr;[[Dynamic Load Balancing EVC2#Supported_Modbus_RTU_models|Supported Smart Energy meters]]<br><br />
&rarr; &rarr;[[Dynamic Load Balancing EVC2#MODBUS TCP/IP METERS|Modbus TCP/IP meters]]<br><br />
&rarr; &rarr;[[Dynamic Load Balancing EVC2#Supported_Modbus_TCP/IP_models|Supported TCP/IP smart energy meters]]<br><br />
&rarr;[[Dynamic Load Balancing EVC2#CT CLAMPS|DLB with CT clamps]]<br><br />
&rarr;[[Dynamic Load Balancing EVC2#EXTERNAL CONTROL|DLB with External control]]<br><br />
&rarr;[[Dynamic Load Balancing EVC2#SMARTSTUFF P1 CONVERTER|DLB with P1 Smartstuff converter]]<br><br />
&rarr;[[Dynamic Load Balancing EVC2#TELTONIKA ENERGY APP SETTINGS|DLB configuration]]<br><br />
<li>[[Solar integration EVC2|Solar integration]]</li><br />
<li>[[Dynamic Load Management EVC2|Dynamic Load Management]]</li><br />
&rarr;[[Dynamic Load Management EVC2#DLM VIA MODBUS RTU|DLM via modbus RTU]]<br><br />
&rarr;[[Dynamic Load Management EVC2#DLM VIA MODBUS TCP/IP|DLM via modbus TCP/IP]]<br><br />
&rarr;[[Dynamic Load Management EVC2#TELTONIKA ENERGY APP SETTINGS|DLM configuration]]<br><br />
<li>[[OCPP 1.6 JSON guide EVC2|Connecting Teltonika EVC stations via OCPP 1.6 JSON Guide]]</li><br />
&rarr; [[OCPP 1.6 JSON guide EVC2#COMPATIBLE SOFTWARE PROVIDERS FOR OCPP INTEGRATION|Compatible Software Providers for OCPP Integration]]<br><br />
<li>[[In app diagnostics|In app diagnostics]]</li><br />
<br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[Resources]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<li>[[EVC2 firmware|Firmware]]</li><br />
<li>[[FAQEVC2|FAQ]]</li><br />
<li>[[UseCases2|Use cases]]</li><br />
<li>[[SupportEVC2|Support forum]]</li><br />
<li>[[Preventive Maintenance|Preventive Maintenance]]</li><br />
<br />
</ul><br />
</ul><br />
</big><br />
<br />
[[Category: Main Page]]</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=Quick_user_guide_of_mobile_application_EVC2&diff=5472
Quick user guide of mobile application EVC2
2026-04-21T08:25:38Z
<p>KarolisS: </p>
<hr />
<div>== Quick user guide ==<br />
Press on the picture to download a guide on how to configure the device<br />
<br />
[[File:PDF_picture.png|link=https://wiki.teltonika-energy.com/images/8/8c/EVC2_QUG_v2.1.pdf|alt=|frameless]]</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=File:EVC2_QUG_v2.1.pdf&diff=5471
File:EVC2 QUG v2.1.pdf
2026-04-21T08:24:26Z
<p>KarolisS: </p>
<hr />
<div></div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=EVC2_single/double_poles&diff=5465
EVC2 single/double poles
2026-04-08T06:52:03Z
<p>KarolisS: /* Description */</p>
<hr />
<div>= Single and double mounting poles =<br />
== Description ==<br />
Slim and elegant mounting pole for two EV chargers. Great for side-by-side parking configurations in houses, apartment complexes, company parking. Allows to fully hide wiring as entry from back of charger is used. Sturdy steel construction. Pre-threaded mounting plates for fast and secure installation. Pre-drilled holes for mounting cable holder accessories (purchased separately) for a tidy and clean look. Supplied with anchors for mounting in concrete.<br />
== Installation manual and datasheet ==<br />
[[Media:EVC 2 Single-Dual mounting pole datasheet-manual.pdf|EVC 2 Single/Dual mounting pole datasheet/manual]]<br />
<br />
__FORCETOC__</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=Main_Page_EVC2&diff=5464
Main Page EVC2
2026-04-08T06:17:54Z
<p>KarolisS: </p>
<hr />
<div>=General information=<br />
<br><br />
<div style="background-color: #f2f2f2; padding: 20px;"> <br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[General information]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<ul><br />
<li>[[General Specifications EVC2|General Specifications]]</li><br />
<li>[[EVC_2_Datasheets|Datasheet]]</li><br />
<li>[[Electrical Specifications EVC2|Electrical Specifications]]</li><br />
<li>[[Warranty/EVC2|Warranty]]</li><br />
<li>[[Compliance documentation EVC2|Compliance documentation]]<br />
</ul><br />
<br />
<br />
<div style="background-color: #f2f2f2; padding: 0px;"> <br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[Getting Started]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<br />
<ul style="list-style-type: disc; margin-left: 20px; padding: 0;"><br />
<li>[[First Start Guide EVC2|First Start Guide]]</li><br />
<li>[[Media:EVC200_installation_manual_shortened.pdf|Physical installation process]]</li><br />
<li>[[Media:EVC200 Installation manual V.10.200.pdf|Installation Manual]]</li><br />
<li>[[Quick user guide of mobile application EVC2|Quick user guide of mobile application]]</li><br />
</ul><br />
<br />
<br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 0px; text-align: center;">[[Product guides]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<ul><br />
<li>[[EVC2 charger|Product Guide of EVC2]]</li><br />
<li>[[Functionalities EVC2|Functionalities]]</li><br />
<li>[[Troubleshooting Guide EVC2|Troubleshooting Guide]]</li><br />
<li>[[TeltoCharge product codes EVC2|Product numbers - what to order?]]</li><br />
</ul><br />
<br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 0px; text-align: center;">[[Accessories]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<ul><br />
<li>[[EVC2 P1 dongle|P1 dongle]]</li><br />
<li>[[EVC2 Modbus TCP meters|Modbus TCP meters]]</li><br />
<li>[[EVC2 Modbus RTU meters|Modbus RTU meters]]</li><br />
<li>[[EVC2 CT clamps|CT clamps]]</li><br />
<li>[[EVC2 single/double poles|Single and double mounting poles]]</li><br />
<li>[[EVC2 quadruple mounting poles|Quadruple mounting pole]]</li><br />
<li>[[EVC2 cable holder|Cable holder]]</li><br />
<li>[[EVC2 nfc card pack|NFC card pack]]</li><br />
<li>[[EVC2 RCBO|RCBO device]]</li><br />
<li>[[EVC2 frontplates|Frontplates]]</li><br />
</ul><br />
<br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[Advanced Topics]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<ul><br />
<li>[[Potential free contact|'''NEW:''' Potential free contact]]</li><br />
<li>[[Power Selector Switch|'''NEW:''' Power Selector Switch]]</li><br />
<li>[[Restart button|'''NEW:''' Button functionality]]</li><br />
<li>[[2x RS458 support|'''NEW:'''2x:RS485 ports for DLM & MID]]</li><br />
<li>[[Dynamic Load Balancing EVC2|Dynamic Load Balancing]]</li><br />
&rarr;[[Dynamic Load Balancing EVC2#SMART METER AND TELTOCHARGE COMMUNICATION|DLB with Smart meters]]<br><br />
&rarr; &rarr;[[Dynamic Load Balancing EVC2#MODBUS RTU METERS|Modbus RTU meters]]<br><br />
&rarr; &rarr;[[Dynamic Load Balancing EVC2#Supported_Modbus_RTU_models|Supported Smart Energy meters]]<br><br />
&rarr; &rarr;[[Dynamic Load Balancing EVC2#MODBUS TCP/IP METERS|Modbus TCP/IP meters]]<br><br />
&rarr; &rarr;[[Dynamic Load Balancing EVC2#Supported_Modbus_TCP/IP_models|Supported TCP/IP smart energy meters]]<br><br />
&rarr;[[Dynamic Load Balancing EVC2#CT CLAMPS|DLB with CT clamps]]<br><br />
&rarr;[[Dynamic Load Balancing EVC2#EXTERNAL CONTROL|DLB with External control]]<br><br />
&rarr;[[Dynamic Load Balancing EVC2#SMARTSTUFF P1 CONVERTER|DLB with P1 Smartstuff converter]]<br><br />
&rarr;[[Dynamic Load Balancing EVC2#TELTONIKA ENERGY APP SETTINGS|DLB configuration]]<br><br />
<li>[[Solar integration EVC2|Solar integration]]</li><br />
<li>[[Dynamic Load Management EVC2|Dynamic Load Management]]</li><br />
&rarr;[[Dynamic Load Management EVC2#DLM VIA MODBUS RTU|DLM via modbus RTU]]<br><br />
&rarr;[[Dynamic Load Management EVC2#DLM VIA MODBUS TCP/IP|DLM via modbus TCP/IP]]<br><br />
&rarr;[[Dynamic Load Management EVC2#TELTONIKA ENERGY APP SETTINGS|DLM configuration]]<br><br />
<li>[[OCPP 1.6 JSON guide EVC2|Connecting Teltonika EVC stations via OCPP 1.6 JSON Guide]]</li><br />
&rarr; [[OCPP 1.6 JSON guide EVC2#COMPATIBLE SOFTWARE PROVIDERS FOR OCPP INTEGRATION|Compatible Software Providers for OCPP Integration]]<br><br />
<li>[[In app diagnostics|In app diagnostics]]</li><br />
<br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px; text-align: center;">[[Resources]]</h2><br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<li>[[EVC2 firmware|Firmware]]</li><br />
<li>[[FAQEVC2|FAQ]]</li><br />
<li>[[UseCases2|Use cases]]</li><br />
<li>[[SupportEVC2|Support forum]]</li><br />
<li>[[Preventive Maintenance|Preventive Maintenance]]</li><br />
<br />
</ul><br />
</ul><br />
</big><br />
<br />
[[Category: Main Page]]</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=Advanced_Topics&diff=5462
Advanced Topics
2026-04-07T10:22:09Z
<p>KarolisS: Redirected page to Main Page EVC2#Advanced Topics</p>
<hr />
<div>#REDIRECT [[Main_Page_EVC2#Advanced_Topics]]</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=Quick_user_guide_of_mobile_applicationEVC2&diff=5461
Quick user guide of mobile applicationEVC2
2026-04-07T10:12:37Z
<p>KarolisS: Redirected page to Quick user guide of mobile application EVC2</p>
<hr />
<div>#REDIRECT [[Quick user guide of mobile application EVC2]]</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=Quick_user_guide_of_mobile_application_EVC2&diff=5460
Quick user guide of mobile application EVC2
2026-04-07T10:12:20Z
<p>KarolisS: Created page with "''tba''"</p>
<hr />
<div>''tba''</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=Troubleshooting_GuideEVC2&diff=5459
Troubleshooting GuideEVC2
2026-04-07T09:50:14Z
<p>KarolisS: Redirected page to Troubleshooting Guide EVC2</p>
<hr />
<div>#REDIRECT [[Troubleshooting Guide EVC2]]</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=Troubleshooting_GuideEVC2&diff=5458
Troubleshooting GuideEVC2
2026-04-07T09:50:00Z
<p>KarolisS: Created page with "<nowiki>#REDIRECT Troubleshooting Guide EVC2</nowiki>"</p>
<hr />
<div><nowiki>#REDIRECT [[Troubleshooting Guide EVC2]]</nowiki></div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=First_Start_Guide_EVC2&diff=5455
First Start Guide EVC2
2026-03-19T12:08:43Z
<p>KarolisS: </p>
<hr />
<div>= Physical Device Installation Guide =<br />
<br />
=== INSTALLATION MANUAL ===<br />
Press on the picture for shortened guide on how to physically install the device<br />
<br />
[[File:PDF_picture.png|link=https://wiki.teltonika-energy.com/images/9/93/EVC200_installation_manual_shortened.pdf|alt=|frameless]]<br />
<br />
= First start guide =<br />
Follow these detailed steps to get started with EVC2 in a correct way: <br />
{| class="wikitable" style="text-align: center; border: 1px solid #0061FC; font-family: arial, sans-serif; width: 80%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Step Number<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Description<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Notes<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Links<br />
|-<br />
| style="padding: 8px;" |1<br />
| style="padding: 8px;" |'''Download EV Charging APP'''<br />
| style="padding: 20px;" |<br />
| style="padding: 8px;" |[https://play.google.com/store/apps/details?id=com.teltonika.ems.ev&pcampaignid=web_share For Android] <br />
[https://apps.apple.com/lt/app/ev-charging/id1618750750 For Apple]<br />
|-<br />
| style="padding: 8px;" |2<br />
| style="padding: 8px;" |'''Pair'''<br />
| style="padding: 20px;" |Pairing code can be found on the sticker.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/0/07/Pairing_1.png Pairing process]<br />
|-<br />
| style="padding: 8px;" |3<br />
| style="padding: 8px;" |'''Update device to the latest FW'''<br />
| style="padding: 8px;" |After pairing, choose your device in the menu, and a notification may suggest updating the firmware version.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/4/4c/Update_11.png How to update]<br />
|-<br />
| style="padding: 8px;" |4<br />
| style="padding: 8px;" |'''Configure your EVC2'''<br />
| style="padding: 8px;" |Follow steps in device configuration guide and using Teltonika EV Charging app set parameters according to your site requirements.<br />
| style="padding: 8px;" | -<br />
|}<br />
<br />
== Configuration Setup Possibilities ==<br />
<br />
=== Home installation configuration with CT Clamps ===<br />
{| class="wikitable" style="text-align: center; border: 1px solid #0054A6; font-family: arial, sans-serif; width: 80%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Step Number<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Description<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Suggestions<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Links<br />
|-<br />
| style="padding: 8px;" |1<br />
| style="padding: 8px;" |'''CT clamp'''<br />
| style="padding: 20px;" |CT clamps installation option in the wiki link on the right<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/view/Dynamic_Load_Balancing_EVC2#CT_CLAMPS CT clamps]<br />
|-<br />
| style="padding: 8px;" |2<br />
| style="padding: 8px;" |'''Go to Installer Settings via EV Charging APP'''<br />
| style="padding: 20px;" |Enter the installers menu by entering the password<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/d/dc/Installers_menu_access.png Installer menu access]<br />
|-<br />
| style="padding: 8px;" |3<br />
| style="padding: 8px;" |'''Go to Load Balancing section'''<br />
| style="padding: 8px;" |1. Select CT Clamp as measuring device. <br />
2. Enable Load Balancing and press on ''DLB CT'' button. <br />
''(Before calibration, ensure at least one CT is connected to the device and that its measuring end is not clamped around the cable)'' <br />
3. Calibrate your CT clamps.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/3/30/Ct_clamps_1.png How to enable CT clamps]<br />
|-<br />
| style="padding: 8px;" |4<br />
| style="padding: 8px;" |'''Test setup'''<br />
| style="padding: 8px;" |1. Plug in cable from charger to EV, but don't start charging. <br />
2. Go to '''Diagnostics''' window in the app and check if '''Max allowed current''' is more than at least 6 A to start charging.<br />
| style="padding: 8px;" |1. [https://wiki.teltonika-energy.com/images/0/00/No_limitations_Diagnostics.png No limitations] <br />
2. [https://wiki.teltonika-energy.com/images/d/d1/Load_balance_limitations_Diagnostics.png Load balance limitations]<br />
|}<br />
<br />
=== Home installation configuration with Modbus RTU meter ===<br />
{| class="wikitable" style="text-align: center; border: 1px solid #0054A6; font-family: arial, sans-serif; width: 80%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Step Number<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Description<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Suggestions<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Links<br />
|-<br />
| style="padding: 8px;" |1<br />
| style="padding: 8px;" |'''Modbus RTU meters'''<br />
| style="padding: 20px;" |Modbus RTU installation option in the wiki link on the right<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/view/Dynamic_Load_Balancing_EVC2#MODBUS_RTU_METERS Modbus RTU meters]<br />
|-<br />
| style="padding: 8px;" |2<br />
| style="padding: 8px;" |'''Go to Installer Settings via EV Charging APP'''<br />
| style="padding: 20px;" |Enter the installers menu by entering the password<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/d/dc/Installers_menu_access.png Installer menu access]<br />
|-<br />
| style="padding: 8px;" |3<br />
| style="padding: 8px;" |'''Go to Load Balancing section'''<br />
| style="padding: 8px;" |1. Select Modbus RTU meter as measuring device. <br />
2. Enable Load Balancing and search for the meter.<br />
<br />
3. Select max grid load after successful connection.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/2/2e/Modbus_RTU_meters_1.png How to enable Modbus RTU meters]<br />
|-<br />
| style="padding: 8px;" |4<br />
| style="padding: 8px;" |'''Test setup'''<br />
| style="padding: 8px;" |1. Plug in cable from charger to EV, but don't start charging. <br />
2. Go to '''Diagnostics''' window in the app and check if '''Max allowed current''' is more than at least 6 A to start charging.<br />
| style="padding: 8px;" |1. [https://wiki.teltonika-energy.com/images/0/00/No_limitations_Diagnostics.png No limitations] <br />
2. [https://wiki.teltonika-energy.com/images/d/d1/Load_balance_limitations_Diagnostics.png Load balance limitations]<br />
|}<br />
=== Home installation configuration with Network meter ===<br />
{| class="wikitable" style="text-align: center; border: 1px solid #0054A6; font-family: arial, sans-serif; width: 80%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Step Number<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Description<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Suggestions<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Links<br />
|-<br />
| style="padding: 8px;" |1<br />
| style="padding: 8px;" |'''Network TCP/IP meters'''<br />
| style="padding: 20px;" |Network meter installation option in the wiki link on the right<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/view/Dynamic_Load_Balancing_EVC2#MODBUS_TCP/IP_METERS Network meters]<br />
|-<br />
| style="padding: 8px;" |2<br />
| style="padding: 8px;" |'''Go to Installer Settings via EV Charging APP'''<br />
| style="padding: 20px;" |Enter the installers menu by entering the password<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/d/dc/Installers_menu_access.png Installer menu access]<br />
|-<br />
|3<br />
|'''Connect device to the network'''<br />
|Enable one of the connectivity options on your device via the app<br />
|[https://wiki.teltonika-energy.com/images/f/f7/Connectivity_1.png Connectivity]<br />
|-<br />
| style="padding: 8px;" |4<br />
| style="padding: 8px;" |'''Go to Load Balancing section'''<br />
| style="padding: 8px;" |1. Select Network meter as measuring device. <br />
2. Enable Load Balancing and search for the meter.<br />
<br />
3. Select max grid load after successful connection.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/0/01/Network_meters_11.png How to enable Network meters]<br />
|-<br />
| style="padding: 8px;" |5<br />
| style="padding: 8px;" |'''Test setup'''<br />
| style="padding: 8px;" |1. Plug in cable from charger to EV, but don't start charging. <br />
2. Go to '''Diagnostics''' window in the app and check if '''Max allowed current''' is more than at least 6 A to start charging.<br />
| style="padding: 8px;" |1. [https://wiki.teltonika-energy.com/images/0/00/No_limitations_Diagnostics.png No limitations] <br />
2. [https://wiki.teltonika-energy.com/images/d/d1/Load_balance_limitations_Diagnostics.png Load balance limitations]<br />
|}<br />
=== Enabling solar charging configuration ===<br />
{| class="wikitable" style="text-align: center; border: 1px solid #0054A6; font-family: arial, sans-serif; width: 80%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Step Number<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Description<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Suggestions<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Links<br />
|-<br />
| style="padding: 8px;" |1<br />
| style="padding: 8px;" |'''Go to Installer Settings via EV Charging APP'''<br />
| style="padding: 20px;" |Enter the installers menu by entering the password<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/d/dc/Installers_menu_access.png Installer menu access]<br />
|-<br />
|2<br />
|'''Enable solar charging option'''<br />
|Select the measurement method the device is using<br />
and enable solar charging functionality<br />
|[https://wiki.teltonika-energy.com/images/8/8f/Solar_charging_1.png Solar charging functions]<br />
|-<br />
| style="padding: 8px;" |3<br />
| style="padding: 8px;" |'''Check available charging modes'''<br />
| style="padding: 8px;" |1. Select Network meter as measuring device. <br />
2. Enable Load Balancing and search for the meter.<br />
<br />
3. Select max grid load after successful connection.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/1/10/Solar_charging_modes_1.png Enable solar charging modes]<br />
[https://wiki.teltonika-energy.com/view/Solar_integration_EVC2 Wiki page about solar integration]<br />
|-<br />
| style="padding: 8px;" |4<br />
| style="padding: 8px;" |'''Test setup'''<br />
| style="padding: 8px;" |1. Plug in cable from charger to EV, but don't start charging. <br />
2. Go to '''Diagnostics''' window in the app and check if '''Max allowed current''' is more than at least 6 A to start charging.<br />
<br />
3. Solar panel generation can be seen as export to grid<br />
| style="padding: 8px;" |1. [https://wiki.teltonika-energy.com/images/0/00/No_limitations_Diagnostics.png No limitations] <br />
2. [https://wiki.teltonika-energy.com/images/d/d1/Load_balance_limitations_Diagnostics.png Load balance limitations]<br />
<br />
3. [https://wiki.teltonika-energy.com/images/d/d1/Diagnostics_1.png Export/import from grid]<br />
|}</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=File:Network_meters_11.png&diff=5454
File:Network meters 11.png
2026-03-19T12:08:19Z
<p>KarolisS: </p>
<hr />
<div></div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=First_Start_Guide_EVC2&diff=5453
First Start Guide EVC2
2026-03-19T12:02:32Z
<p>KarolisS: /* First start guide */</p>
<hr />
<div>= Physical Device Installation Guide =<br />
<br />
=== INSTALLATION MANUAL ===<br />
Press on the picture for shortened guide on how to physically install the device<br />
<br />
[[File:PDF_picture.png|link=https://wiki.teltonika-energy.com/images/9/93/EVC200_installation_manual_shortened.pdf|alt=|frameless]]<br />
<br />
= First start guide =<br />
Follow these detailed steps to get started with EVC2 in a correct way: <br />
{| class="wikitable" style="text-align: center; border: 1px solid #0061FC; font-family: arial, sans-serif; width: 80%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Step Number<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Description<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Notes<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Links<br />
|-<br />
| style="padding: 8px;" |1<br />
| style="padding: 8px;" |'''Download EV Charging APP'''<br />
| style="padding: 20px;" |<br />
| style="padding: 8px;" |[https://play.google.com/store/apps/details?id=com.teltonika.ems.ev&pcampaignid=web_share For Android] <br />
[https://apps.apple.com/lt/app/ev-charging/id1618750750 For Apple]<br />
|-<br />
| style="padding: 8px;" |2<br />
| style="padding: 8px;" |'''Pair'''<br />
| style="padding: 20px;" |Pairing code can be found on the sticker.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/0/07/Pairing_1.png Pairing process]<br />
|-<br />
| style="padding: 8px;" |3<br />
| style="padding: 8px;" |'''Update device to the latest FW'''<br />
| style="padding: 8px;" |After pairing, choose your device in the menu, and a notification may suggest updating the firmware version.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/4/4c/Update_11.png How to update]<br />
|-<br />
| style="padding: 8px;" |4<br />
| style="padding: 8px;" |'''Configure your EVC2'''<br />
| style="padding: 8px;" |Follow steps in device configuration guide and using Teltonika EV Charging app set parameters according to your site requirements.<br />
| style="padding: 8px;" | -<br />
|}<br />
<br />
== Configuration Setup Possibilities ==<br />
<br />
=== Home installation configuration with CT Clamps ===<br />
{| class="wikitable" style="text-align: center; border: 1px solid #0054A6; font-family: arial, sans-serif; width: 80%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Step Number<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Description<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Suggestions<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Links<br />
|-<br />
| style="padding: 8px;" |1<br />
| style="padding: 8px;" |'''CT clamp'''<br />
| style="padding: 20px;" |CT clamps installation option in the wiki link on the right<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/view/Dynamic_Load_Balancing_EVC2#CT_CLAMPS CT clamps]<br />
|-<br />
| style="padding: 8px;" |2<br />
| style="padding: 8px;" |'''Go to Installer Settings via EV Charging APP'''<br />
| style="padding: 20px;" |Enter the installers menu by entering the password<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/d/dc/Installers_menu_access.png Installer menu access]<br />
|-<br />
| style="padding: 8px;" |3<br />
| style="padding: 8px;" |'''Go to Load Balancing section'''<br />
| style="padding: 8px;" |1. Select CT Clamp as measuring device. <br />
2. Enable Load Balancing and press on ''DLB CT'' button. <br />
''(Before calibration, ensure at least one CT is connected to the device and that its measuring end is not clamped around the cable)'' <br />
3. Calibrate your CT clamps.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/3/30/Ct_clamps_1.png How to enable CT clamps]<br />
|-<br />
| style="padding: 8px;" |4<br />
| style="padding: 8px;" |'''Test setup'''<br />
| style="padding: 8px;" |1. Plug in cable from charger to EV, but don't start charging. <br />
2. Go to '''Diagnostics''' window in the app and check if '''Max allowed current''' is more than at least 6 A to start charging.<br />
| style="padding: 8px;" |1. [https://wiki.teltonika-energy.com/images/0/00/No_limitations_Diagnostics.png No limitations] <br />
2. [https://wiki.teltonika-energy.com/images/d/d1/Load_balance_limitations_Diagnostics.png Load balance limitations]<br />
|}<br />
<br />
=== Home installation configuration with Modbus RTU meter ===<br />
{| class="wikitable" style="text-align: center; border: 1px solid #0054A6; font-family: arial, sans-serif; width: 80%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Step Number<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Description<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Suggestions<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Links<br />
|-<br />
| style="padding: 8px;" |1<br />
| style="padding: 8px;" |'''Modbus RTU meters'''<br />
| style="padding: 20px;" |Modbus RTU installation option in the wiki link on the right<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/view/Dynamic_Load_Balancing_EVC2#MODBUS_RTU_METERS Modbus RTU meters]<br />
|-<br />
| style="padding: 8px;" |2<br />
| style="padding: 8px;" |'''Go to Installer Settings via EV Charging APP'''<br />
| style="padding: 20px;" |Enter the installers menu by entering the password<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/d/dc/Installers_menu_access.png Installer menu access]<br />
|-<br />
| style="padding: 8px;" |3<br />
| style="padding: 8px;" |'''Go to Load Balancing section'''<br />
| style="padding: 8px;" |1. Select Modbus RTU meter as measuring device. <br />
2. Enable Load Balancing and search for the meter.<br />
<br />
3. Select max grid load after successful connection.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/2/2e/Modbus_RTU_meters_1.png How to enable Modbus RTU meters]<br />
|-<br />
| style="padding: 8px;" |4<br />
| style="padding: 8px;" |'''Test setup'''<br />
| style="padding: 8px;" |1. Plug in cable from charger to EV, but don't start charging. <br />
2. Go to '''Diagnostics''' window in the app and check if '''Max allowed current''' is more than at least 6 A to start charging.<br />
| style="padding: 8px;" |1. [https://wiki.teltonika-energy.com/images/0/00/No_limitations_Diagnostics.png No limitations] <br />
2. [https://wiki.teltonika-energy.com/images/d/d1/Load_balance_limitations_Diagnostics.png Load balance limitations]<br />
|}<br />
=== Home installation configuration with Network meter ===<br />
{| class="wikitable" style="text-align: center; border: 1px solid #0054A6; font-family: arial, sans-serif; width: 80%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Step Number<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Description<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Suggestions<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Links<br />
|-<br />
| style="padding: 8px;" |1<br />
| style="padding: 8px;" |'''Network TCP/IP meters'''<br />
| style="padding: 20px;" |Network meter installation option in the wiki link on the right<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/view/Dynamic_Load_Balancing_EVC2#MODBUS_TCP/IP_METERS Network meters]<br />
|-<br />
| style="padding: 8px;" |2<br />
| style="padding: 8px;" |'''Go to Installer Settings via EV Charging APP'''<br />
| style="padding: 20px;" |Enter the installers menu by entering the password<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/d/dc/Installers_menu_access.png Installer menu access]<br />
|-<br />
|3<br />
|'''Connect device to the network'''<br />
|Enable one of the connectivity options on your device via the app<br />
|[https://wiki.teltonika-energy.com/images/f/f7/Connectivity_1.png Connectivity]<br />
|-<br />
| style="padding: 8px;" |4<br />
| style="padding: 8px;" |'''Go to Load Balancing section'''<br />
| style="padding: 8px;" |1. Select Network meter as measuring device. <br />
2. Enable Load Balancing and search for the meter.<br />
<br />
3. Select max grid load after successful connection.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/2/29/Network_meters_1.png How to enable Network meters]<br />
|-<br />
| style="padding: 8px;" |5<br />
| style="padding: 8px;" |'''Test setup'''<br />
| style="padding: 8px;" |1. Plug in cable from charger to EV, but don't start charging. <br />
2. Go to '''Diagnostics''' window in the app and check if '''Max allowed current''' is more than at least 6 A to start charging.<br />
| style="padding: 8px;" |1. [https://wiki.teltonika-energy.com/images/0/00/No_limitations_Diagnostics.png No limitations] <br />
2. [https://wiki.teltonika-energy.com/images/d/d1/Load_balance_limitations_Diagnostics.png Load balance limitations]<br />
|}<br />
=== Enabling solar charging configuration ===<br />
{| class="wikitable" style="text-align: center; border: 1px solid #0054A6; font-family: arial, sans-serif; width: 80%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Step Number<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Description<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Suggestions<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Links<br />
|-<br />
| style="padding: 8px;" |1<br />
| style="padding: 8px;" |'''Go to Installer Settings via EV Charging APP'''<br />
| style="padding: 20px;" |Enter the installers menu by entering the password<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/d/dc/Installers_menu_access.png Installer menu access]<br />
|-<br />
|2<br />
|'''Enable solar charging option'''<br />
|Select the measurement method the device is using<br />
and enable solar charging functionality<br />
|[https://wiki.teltonika-energy.com/images/8/8f/Solar_charging_1.png Solar charging functions]<br />
|-<br />
| style="padding: 8px;" |3<br />
| style="padding: 8px;" |'''Check available charging modes'''<br />
| style="padding: 8px;" |1. Select Network meter as measuring device. <br />
2. Enable Load Balancing and search for the meter.<br />
<br />
3. Select max grid load after successful connection.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/1/10/Solar_charging_modes_1.png Enable solar charging modes]<br />
[https://wiki.teltonika-energy.com/view/Solar_integration_EVC2 Wiki page about solar integration]<br />
|-<br />
| style="padding: 8px;" |4<br />
| style="padding: 8px;" |'''Test setup'''<br />
| style="padding: 8px;" |1. Plug in cable from charger to EV, but don't start charging. <br />
2. Go to '''Diagnostics''' window in the app and check if '''Max allowed current''' is more than at least 6 A to start charging.<br />
<br />
3. Solar panel generation can be seen as export to grid<br />
| style="padding: 8px;" |1. [https://wiki.teltonika-energy.com/images/0/00/No_limitations_Diagnostics.png No limitations] <br />
2. [https://wiki.teltonika-energy.com/images/d/d1/Load_balance_limitations_Diagnostics.png Load balance limitations]<br />
<br />
3. [https://wiki.teltonika-energy.com/images/d/d1/Diagnostics_1.png Export/import from grid]<br />
|}</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=File:Diagnostics_1.png&diff=5452
File:Diagnostics 1.png
2026-03-19T12:00:39Z
<p>KarolisS: </p>
<hr />
<div></div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=File:Solar_charging_modes_1.png&diff=5451
File:Solar charging modes 1.png
2026-03-19T11:56:49Z
<p>KarolisS: </p>
<hr />
<div></div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=File:Solar_charging_1.png&diff=5450
File:Solar charging 1.png
2026-03-19T11:51:25Z
<p>KarolisS: </p>
<hr />
<div></div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=First_Start_Guide_EVC2&diff=5449
First Start Guide EVC2
2026-03-19T11:48:27Z
<p>KarolisS: </p>
<hr />
<div>= Physical Device Installation Guide =<br />
<br />
=== INSTALLATION MANUAL ===<br />
Press on the picture for shortened guide on how to physically install the device<br />
<br />
[[File:PDF_picture.png|link=https://wiki.teltonika-energy.com/images/9/93/EVC200_installation_manual_shortened.pdf|alt=|frameless]]<br />
<br />
= First start guide =<br />
Follow these detailed steps to get started with EVC2 in a correct way: <br />
{| class="wikitable" style="text-align: center; border: 1px solid #0061FC; font-family: arial, sans-serif; width: 80%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Step Number<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Description<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Notes<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Links<br />
|-<br />
| style="padding: 8px;" |1<br />
| style="padding: 8px;" |'''Download EV Charging APP'''<br />
| style="padding: 20px;" |<br />
| style="padding: 8px;" |[https://play.google.com/store/apps/details?id=com.teltonika.ems.ev&pcampaignid=web_share For Android] <br />
[https://apps.apple.com/lt/app/ev-charging/id1618750750 For Apple]<br />
|-<br />
| style="padding: 8px;" |2<br />
| style="padding: 8px;" |'''Pair'''<br />
| style="padding: 20px;" |Pairing code can be found on the sticker.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/0/07/Pairing_1.png Pairing process]<br />
|-<br />
| style="padding: 8px;" |3<br />
| style="padding: 8px;" |'''Update device to the latest FW'''<br />
| style="padding: 8px;" |After pairing, choose your device in the menu, and a notification may suggest updating the firmware version.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/4/4c/Update_11.png How to update]<br />
|-<br />
| style="padding: 8px;" |4<br />
| style="padding: 8px;" |'''Configure your EVC2'''<br />
| style="padding: 8px;" |Follow steps in device configuration guide and using Teltonika EV Charging app set parameters according to your site requirements.<br />
| style="padding: 8px;" | -<br />
|}<br />
<br />
== Configuration Setup Possibilities ==<br />
<br />
=== Home installation configuration with CT Clamps ===<br />
{| class="wikitable" style="text-align: center; border: 1px solid #0054A6; font-family: arial, sans-serif; width: 80%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Step Number<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Description<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Suggestions<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Links<br />
|-<br />
| style="padding: 8px;" |1<br />
| style="padding: 8px;" |'''CT clamp'''<br />
| style="padding: 20px;" |CT clamps installation option in the wiki link on the right<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/view/Dynamic_Load_Balancing_EVC2#CT_CLAMPS CT clamps]<br />
|-<br />
| style="padding: 8px;" |2<br />
| style="padding: 8px;" |'''Go to Installer Settings via EV Charging APP'''<br />
| style="padding: 20px;" |Enter the installers menu by entering the password<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/d/dc/Installers_menu_access.png Installer menu access]<br />
|-<br />
| style="padding: 8px;" |3<br />
| style="padding: 8px;" |'''Go to Load Balancing section'''<br />
| style="padding: 8px;" |1. Select CT Clamp as measuring device. <br />
2. Enable Load Balancing and press on ''DLB CT'' button. <br />
''(Before calibration, ensure at least one CT is connected to the device and that its measuring end is not clamped around the cable)'' <br />
3. Calibrate your CT clamps.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/3/30/Ct_clamps_1.png How to enable CT clamps]<br />
|-<br />
| style="padding: 8px;" |4<br />
| style="padding: 8px;" |'''Test setup'''<br />
| style="padding: 8px;" |1. Plug in cable from charger to EV, but don't start charging. <br />
2. Go to '''Diagnostics''' window in the app and check if '''Max allowed current''' is more than at least 6 A to start charging.<br />
| style="padding: 8px;" |1. [https://wiki.teltonika-energy.com/images/0/00/No_limitations_Diagnostics.png No limitations] <br />
2. [https://wiki.teltonika-energy.com/images/d/d1/Load_balance_limitations_Diagnostics.png Load balance limitations]<br />
|}<br />
<br />
=== Home installation configuration with Modbus RTU meter ===<br />
{| class="wikitable" style="text-align: center; border: 1px solid #0054A6; font-family: arial, sans-serif; width: 80%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Step Number<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Description<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Suggestions<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Links<br />
|-<br />
| style="padding: 8px;" |1<br />
| style="padding: 8px;" |'''Modbus RTU meters'''<br />
| style="padding: 20px;" |Modbus RTU installation option in the wiki link on the right<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/view/Dynamic_Load_Balancing_EVC2#MODBUS_RTU_METERS Modbus RTU meters]<br />
|-<br />
| style="padding: 8px;" |2<br />
| style="padding: 8px;" |'''Go to Installer Settings via EV Charging APP'''<br />
| style="padding: 20px;" |Enter the installers menu by entering the password<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/d/dc/Installers_menu_access.png Installer menu access]<br />
|-<br />
| style="padding: 8px;" |3<br />
| style="padding: 8px;" |'''Go to Load Balancing section'''<br />
| style="padding: 8px;" |1. Select Modbus RTU meter as measuring device. <br />
2. Enable Load Balancing and search for the meter.<br />
<br />
3. Select max grid load after successful connection.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/2/2e/Modbus_RTU_meters_1.png How to enable Modbus RTU meters]<br />
|-<br />
| style="padding: 8px;" |4<br />
| style="padding: 8px;" |'''Test setup'''<br />
| style="padding: 8px;" |1. Plug in cable from charger to EV, but don't start charging. <br />
2. Go to '''Diagnostics''' window in the app and check if '''Max allowed current''' is more than at least 6 A to start charging.<br />
| style="padding: 8px;" |1. [https://wiki.teltonika-energy.com/images/0/00/No_limitations_Diagnostics.png No limitations] <br />
2. [https://wiki.teltonika-energy.com/images/d/d1/Load_balance_limitations_Diagnostics.png Load balance limitations]<br />
|}<br />
=== Home installation configuration with Network meter ===<br />
{| class="wikitable" style="text-align: center; border: 1px solid #0054A6; font-family: arial, sans-serif; width: 80%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Step Number<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Description<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Suggestions<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Links<br />
|-<br />
| style="padding: 8px;" |1<br />
| style="padding: 8px;" |'''Network TCP/IP meters'''<br />
| style="padding: 20px;" |Network meter installation option in the wiki link on the right<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/view/Dynamic_Load_Balancing_EVC2#MODBUS_TCP/IP_METERS Network meters]<br />
|-<br />
| style="padding: 8px;" |2<br />
| style="padding: 8px;" |'''Go to Installer Settings via EV Charging APP'''<br />
| style="padding: 20px;" |Enter the installers menu by entering the password<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/d/dc/Installers_menu_access.png Installer menu access]<br />
|-<br />
|3<br />
|'''Connect device to the network'''<br />
|Enable one of the connectivity options on your device via the app<br />
|[https://wiki.teltonika-energy.com/images/f/f7/Connectivity_1.png Connectivity]<br />
|-<br />
| style="padding: 8px;" |4<br />
| style="padding: 8px;" |'''Go to Load Balancing section'''<br />
| style="padding: 8px;" |1. Select Network meter as measuring device. <br />
2. Enable Load Balancing and search for the meter.<br />
<br />
3. Select max grid load after successful connection.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/2/29/Network_meters_1.png How to enable Network meters]<br />
|-<br />
| style="padding: 8px;" |5<br />
| style="padding: 8px;" |'''Test setup'''<br />
| style="padding: 8px;" |1. Plug in cable from charger to EV, but don't start charging. <br />
2. Go to '''Diagnostics''' window in the app and check if '''Max allowed current''' is more than at least 6 A to start charging.<br />
| style="padding: 8px;" |1. [https://wiki.teltonika-energy.com/images/0/00/No_limitations_Diagnostics.png No limitations] <br />
2. [https://wiki.teltonika-energy.com/images/d/d1/Load_balance_limitations_Diagnostics.png Load balance limitations]<br />
|}</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=File:Connectivity_1.png&diff=5448
File:Connectivity 1.png
2026-03-19T11:46:46Z
<p>KarolisS: </p>
<hr />
<div></div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=File:Modbus_RTU_meters_1.png&diff=5446
File:Modbus RTU meters 1.png
2026-03-19T11:35:15Z
<p>KarolisS: </p>
<hr />
<div></div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=First_Start_Guide_EVC2&diff=5445
First Start Guide EVC2
2026-03-19T11:32:33Z
<p>KarolisS: </p>
<hr />
<div>= Physical Device Installation Guide =<br />
<br />
=== INSTALLATION MANUAL ===<br />
Press on the picture for shortened guide on how to physically install the device<br />
<br />
[[File:PDF_picture.png|link=https://wiki.teltonika-energy.com/images/9/93/EVC200_installation_manual_shortened.pdf|alt=|frameless]]<br />
<br />
= First start guide =<br />
With easy-to-follow instructions, you'll be up and running in no time, making the most of your new experience.<br />
{| class="wikitable"<br />
|+ Mandatory Steps<br />
|-<br />
! Step !! Explanation !! Information<br />
|-<br />
| '''Connect wires''' || Connection type is detected automatically || Link to all available connections/wirings<br />
|-<br />
| '''Pair''' || Pairing code can be found on the sticker || <br />
|-<br />
| '''Finish set-up''' || Possibility to change currency, kWH price and name of charging station. Also add NFC card is necessary || <br />
|-<br />
| '''Update FW''' || After finish the set-up window, pop-up about available update will show up. <br />
Proceed with the suggestion || <br />
|-<br />
| '''Installer menu''' || All important settings are hidden under secured menu that could be accessed with code || <br />
|-<br />
| ''*Use case'''''Bold text''' || Different configuration examples. || Link to use cases<br />
<br />
|}Follow these detailed steps to get started with TeltoCharge in a correct way: <br />
{| class="wikitable" style="text-align: center; border: 1px solid #0061FC; font-family: arial, sans-serif; width: 80%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Step Number<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Description<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Notes<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Links<br />
|-<br />
| style="padding: 8px;" |1<br />
| style="padding: 8px;" |'''Download EV Charging APP'''<br />
| style="padding: 20px;" |<br />
| style="padding: 8px;" |[https://play.google.com/store/apps/details?id=com.teltonika.ems.ev&pcampaignid=web_share For Android] <br />
[https://apps.apple.com/lt/app/ev-charging/id1618750750 For Apple]<br />
|-<br />
| style="padding: 8px;" |2<br />
| style="padding: 8px;" |'''Pair'''<br />
| style="padding: 20px;" |Pairing code can be found on the sticker.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/0/07/Pairing_1.png Pairing process]<br />
|-<br />
| style="padding: 8px;" |3<br />
| style="padding: 8px;" |'''Update device to the latest FW'''<br />
| style="padding: 8px;" |After pairing, choose your device in the menu, and a notification may suggest updating the firmware version.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/4/4c/Update_11.png How to update]<br />
|-<br />
| style="padding: 8px;" |4<br />
| style="padding: 8px;" |'''Configure your EVC2'''<br />
| style="padding: 8px;" |Follow steps in device configuration guide and using Teltonika EV Charging app set parameters according to your site requirements.<br />
| style="padding: 8px;" | -<br />
|}<br />
<br />
== Configuration Setup Possibilities ==<br />
<br />
=== Home Installation configuration with CT Clamps ===<br />
{| class="wikitable" style="text-align: center; border: 1px solid #0054A6; font-family: arial, sans-serif; width: 80%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Step Number<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Description<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Suggestions<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Links<br />
|-<br />
| style="padding: 8px;" |1<br />
| style="padding: 8px;" |'''CT clamp'''<br />
| style="padding: 20px;" |CT clamps installation option in the wiki link on the right<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/view/Dynamic_Load_Balancing_EVC2#CT_CLAMPS CT clamps]<br />
|-<br />
| style="padding: 8px;" |2<br />
| style="padding: 8px;" |'''Go to Installer Settings via EV Charging APP'''<br />
| style="padding: 20px;" |Enter the installers menu by entering the password<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/d/dc/Installers_menu_access.png Installer menu access]<br />
|-<br />
| style="padding: 8px;" |3<br />
| style="padding: 8px;" |'''Go to Load Balancing section'''<br />
| style="padding: 8px;" |1. Select CT Clamp as measuring device. <br />
2. Enable Load Balancing and press on ''DLB CT'' button. <br />
''(Before calibration, ensure at least one CT is connected to the device and that its measuring end is not clamped around the cable)'' <br />
3. Calibrate your CT clamps.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/3/30/Ct_clamps_1.png How to enable CT clamps]<br />
|-<br />
| style="padding: 8px;" |4<br />
| style="padding: 8px;" |'''Test setup'''<br />
| style="padding: 8px;" |1. Plug in cable from charger to EV, but don't start charging. <br />
2. Go to '''Diagnostics''' window in the app and check if '''Max allowed current''' is more than at least 6 A to start charging.<br />
| style="padding: 8px;" |1. [https://wiki.teltonika-energy.com/images/0/00/No_limitations_Diagnostics.png No limitations] <br />
2. [https://wiki.teltonika-energy.com/images/d/d1/Load_balance_limitations_Diagnostics.png Load balance limitations]<br />
|-<br />
|}<br />
<br />
=== Home Installation configuration with Modbus RTU meter ===<br />
{| class="wikitable" style="text-align: center; border: 1px solid #0054A6; font-family: arial, sans-serif; width: 80%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Step Number<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Description<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Suggestions<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Links<br />
|-<br />
| style="padding: 8px;" |1<br />
| style="padding: 8px;" |'''Modbus RTU meters'''<br />
| style="padding: 20px;" |Modbus RTU installation option in the wiki link on the right<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/view/Dynamic_Load_Balancing_EVC2#MODBUS_RTU_METERS CT clamps]<br />
|-<br />
| style="padding: 8px;" |2<br />
| style="padding: 8px;" |'''Go to Installer Settings via EV Charging APP'''<br />
| style="padding: 20px;" |Enter the installers menu by entering the password<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/d/dc/Installers_menu_access.png Installer menu access]<br />
|-<br />
| style="padding: 8px;" |3<br />
| style="padding: 8px;" |'''Go to Load Balancing section'''<br />
| style="padding: 8px;" |1. Select CT Clamp as measuring device. <br />
2. Enable Load Balancing and press on ''DLB CT'' button. <br />
''(Before calibration, ensure at least one CT is connected to the device and that its measuring end is not clamped around the cable)'' <br />
3. Calibrate your CT clamps.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/3/30/Ct_clamps_1.png How to enable CT clamps]<br />
|-<br />
| style="padding: 8px;" |4<br />
| style="padding: 8px;" |'''Test setup'''<br />
| style="padding: 8px;" |1. Plug in cable from charger to EV, but don't start charging. <br />
2. Go to '''Diagnostics''' window in the app and check if '''Max allowed current''' is more than at least 6 A to start charging.<br />
| style="padding: 8px;" |1. [https://wiki.teltonika-energy.com/images/0/00/No_limitations_Diagnostics.png No limitations] <br />
2. [https://wiki.teltonika-energy.com/images/d/d1/Load_balance_limitations_Diagnostics.png Load balance limitations]<br />
|-<br />
|}</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=File:Ct_clamps_1.png&diff=5444
File:Ct clamps 1.png
2026-03-19T11:27:30Z
<p>KarolisS: </p>
<hr />
<div></div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=File:Installers_menu_access.png&diff=5443
File:Installers menu access.png
2026-03-19T11:24:39Z
<p>KarolisS: </p>
<hr />
<div></div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=First_Start_Guide_EVC2&diff=5442
First Start Guide EVC2
2026-03-19T09:18:38Z
<p>KarolisS: </p>
<hr />
<div>= Physical Device Installation Guide =<br />
<br />
=== INSTALLATION MANUAL ===<br />
Press on the picture for shortened guide on how to physically install the device<br />
<br />
[[File:PDF_picture.png|link=https://wiki.teltonika-energy.com/images/9/93/EVC200_installation_manual_shortened.pdf|alt=|frameless]]<br />
<br />
= First start guide =<br />
With easy-to-follow instructions, you'll be up and running in no time, making the most of your new experience.<br />
{| class="wikitable"<br />
|+ Mandatory Steps<br />
|-<br />
! Step !! Explanation !! Information<br />
|-<br />
| '''Connect wires''' || Connection type is detected automatically || Link to all available connections/wirings<br />
|-<br />
| '''Pair''' || Pairing code can be found on the sticker || <br />
|-<br />
| '''Finish set-up''' || Possibility to change currency, kWH price and name of charging station. Also add NFC card is necessary || <br />
|-<br />
| '''Update FW''' || After finish the set-up window, pop-up about available update will show up. <br />
Proceed with the suggestion || <br />
|-<br />
| '''Installer menu''' || All important settings are hidden under secured menu that could be accessed with code || <br />
|-<br />
| ''*Use case'''''Bold text''' || Different configuration examples. || Link to use cases<br />
<br />
|}Follow these detailed steps to get started with TeltoCharge in a correct way: <br />
{| class="wikitable" style="text-align: center; border: 1px solid #0061FC; font-family: arial, sans-serif; width: 80%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Step Number<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Description<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Suggestions<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Links<br />
|-<br />
| style="padding: 8px;" |1<br />
| style="padding: 8px;" |'''Download EV Charging APP'''<br />
| style="padding: 20px;" |<br />
| style="padding: 8px;" |[https://play.google.com/store/apps/details?id=com.teltonika.ems.ev&pcampaignid=web_share For Android] <br />
[https://apps.apple.com/lt/app/ev-charging/id1618750750 For Apple]<br />
|-<br />
| style="padding: 8px;" |2<br />
| style="padding: 8px;" |'''Pair'''<br />
| style="padding: 20px;" |Pairing code can be found on the sticker.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/0/07/Pairing_1.png Pairing process]<br />
|-<br />
| style="padding: 8px;" |3<br />
| style="padding: 8px;" |'''Update device to the latest FW'''<br />
| style="padding: 8px;" |After pairing, choose your device in the menu, and a notification may suggest updating the firmware version.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/4/4c/Update_11.png How to update]<br />
|-<br />
| style="padding: 8px;" |4<br />
| style="padding: 8px;" |'''Configure your EVC2'''<br />
| style="padding: 8px;" |Follow steps in device configuration guide and using Teltonika EV Charging app set parameters according to your site requirements.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/view/Dynamic_Load_Management_EVC16#Teltonika_Energy_App_Settings Possible settings]<br />
|-<br />
| style="padding: 8px;" |5<br />
| style="padding: 8px;" |'''Connect to Wifi'''<br />
| style="padding: 8px;" |After ensuring the device is configured according to your site requirements, open "Connectivity" window in the app and connect device to the internet via Wi-Fi or LAN.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/e/ea/Wifi_or_LAN.png Connect to Wifi or LAN]<br />
|-<br />
| style="padding: 8px;" |6<br />
| style="padding: 8px;" |'''Enable OCPP'''<br />
| style="padding: 8px;" |Once the device is connected to the internet, go to the "OCPP" tab in "Connectivity" window and connect the charger to the Powerverse App by entering this URL: '''wss://ocpp.powerverse.com:443/''' <br />
''note: Make sure your phone doesn't auto correct wss.''<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/images/e/ef/OCPP.png Connect to OCPP]<br />
|-<br />
| style="padding: 8px;" |Additional<br />
| style="padding: 8px;" |'''LED indicators'''<br />
| style="padding: 8px;" |Meaning of TeltoCharge LED indicators.<br />
| style="padding: 8px;" |[https://wiki.teltonika-energy.com/view/Troubleshooting_Guide#LED_indicators LED indicators]<br />
|}</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=File:Update_11.png&diff=5441
File:Update 11.png
2026-03-19T09:17:16Z
<p>KarolisS: </p>
<hr />
<div></div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=File:Pairing_1.png&diff=5438
File:Pairing 1.png
2026-03-19T09:05:30Z
<p>KarolisS: </p>
<hr />
<div></div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=First_Start_Guide_EVC2&diff=5437
First Start Guide EVC2
2026-03-19T08:50:10Z
<p>KarolisS: </p>
<hr />
<div>= Physical Device Installation Guide =<br />
<br />
=== INSTALLATION MANUAL ===<br />
Press on the picture for shortened guide on how to physically install the device<br />
<br />
[[File:PDF_picture.png|link=https://wiki.teltonika-energy.com/images/9/93/EVC200_installation_manual_shortened.pdf|alt=|frameless]]<br />
<br />
= First start guide =<br />
With easy-to-follow instructions, you'll be up and running in no time, making the most of your new experience.<br />
{| class="wikitable"<br />
|+ Mandatory Steps<br />
|-<br />
! Step !! Explanation !! Information<br />
|-<br />
| '''Connect wires''' || Connection type is detected automatically || Link to all available connections/wirings<br />
|-<br />
| '''Pair''' || Pairing code can be found on the sticker || <br />
|-<br />
| '''Finish set-up''' || Possibility to change currency, kWH price and name of charging station. Also add NFC card is necessary || <br />
|-<br />
| '''Update FW''' || After finish the set-up window, pop-up about available update will show up. <br />
Proceed with the suggestion || <br />
|-<br />
| '''Installer menu''' || All important settings are hidden under secured menu that could be accessed with code || <br />
|-<br />
| ''*Use case'''''Bold text''' || Different configuration examples. || Link to use cases<br />
<br />
|}</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=First_Start_Guide_EVC2&diff=5436
First Start Guide EVC2
2026-03-19T08:49:17Z
<p>KarolisS: </p>
<hr />
<div>= Physical Device Installation Guide =<br />
<br />
=== INSTALLATION MANUAL ===<br />
Press on the picture:<br />
<br />
[[File:PDF_picture.png|link=https://wiki.teltonika-energy.com/images/9/93/EVC200_installation_manual_shortened.pdf|alt=|frameless]]<br />
<br />
= First start guide =<br />
With easy-to-follow instructions, you'll be up and running in no time, making the most of your new experience.<br />
{| class="wikitable"<br />
|+ Mandatory Steps<br />
|-<br />
! Step !! Explanation !! Information<br />
|-<br />
| '''Connect wires''' || Connection type is detected automatically || Link to all available connections/wirings<br />
|-<br />
| '''Pair''' || Pairing code can be found on the sticker || <br />
|-<br />
| '''Finish set-up''' || Possibility to change currency, kWH price and name of charging station. Also add NFC card is necessary || <br />
|-<br />
| '''Update FW''' || After finish the set-up window, pop-up about available update will show up. <br />
Proceed with the suggestion || <br />
|-<br />
| '''Installer menu''' || All important settings are hidden under secured menu that could be accessed with code || <br />
|-<br />
| ''*Use case'''''Bold text''' || Different configuration examples. || Link to use cases<br />
<br />
|}</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=First_Start_Guide_EVC2&diff=5435
First Start Guide EVC2
2026-03-19T08:48:54Z
<p>KarolisS: </p>
<hr />
<div>= Physical Device Installation Guide =<br />
<br />
=== INSTALLATION MANUAL ===<br />
Press on the picture:<br />
[[File:PDF_picture.png|link=https://wiki.teltonika-energy.com/images/9/93/EVC200_installation_manual_shortened.pdf|alt=|left|frameless|136x136px]]<br />
<br />
= First start guide =<br />
With easy-to-follow instructions, you'll be up and running in no time, making the most of your new experience.<br />
{| class="wikitable"<br />
|+ Mandatory Steps<br />
|-<br />
! Step !! Explanation !! Information<br />
|-<br />
| '''Connect wires''' || Connection type is detected automatically || Link to all available connections/wirings<br />
|-<br />
| '''Pair''' || Pairing code can be found on the sticker || <br />
|-<br />
| '''Finish set-up''' || Possibility to change currency, kWH price and name of charging station. Also add NFC card is necessary || <br />
|-<br />
| '''Update FW''' || After finish the set-up window, pop-up about available update will show up. <br />
Proceed with the suggestion || <br />
|-<br />
| '''Installer menu''' || All important settings are hidden under secured menu that could be accessed with code || <br />
|-<br />
| ''*Use case'''''Bold text''' || Different configuration examples. || Link to use cases<br />
<br />
|}</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=File:EVC200_installation_manual_shortened.pdf&diff=5434
File:EVC200 installation manual shortened.pdf
2026-03-19T08:48:12Z
<p>KarolisS: </p>
<hr />
<div></div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=Solar_integration_EVC16&diff=5429
Solar integration EVC16
2026-03-16T10:14:40Z
<p>KarolisS: </p>
<hr />
<div> __TOC__<br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> Physical installation </h2><br />
<ol style="list-style-type: none; margin: 0; padding: 0;"><br />
*To ensure proper solar integration functionality, it is essential to begin with the correct physical installation. This involves having a smart energy meter installed in the electric circuit that possesses the necessary communication functionality and is included in our [[Smart energy meters|energy meter list]]. The meter plays a crucial role in detecting negative current flow, indicating when energy consumption is lower than solar generation, and feeding it back into the electrical grid. For effective communication, the charger must be interconnected with the meter.<br />
<br />
*When the meter detects surplus energy, it relays this information to the charger. Based on the charger's internal configurations, it will determine whether to initiate the charging process or not. It is important to note that this process depends on the specific configurations set within the charger. <br />
[[File:Solar integration overview.png|center|frameless|953x953px]]<br />
<br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> Solar integration with CT </h2><br />
<ol style="list-style-type: none; margin: 0; padding: 0;"><br />
<br />
[[File:Solar+ct configuration.jpg|center|frameless|953x953px]]<br />
<br />
==Teltonika Energy App Settings==<br />
===General meter settings===<br />
If you want to enable dynamic load management with a smart meter, it is important to correctly configure the general meter settings. To ensure everything works correctly, please apply the following setup :<br />
<br />
* Open user menu<br />
* Open "'''''Installer Menu'''''"<br />
* Open "'''''Load Balancing'''''" menu and select Modbus RTU meter.<br />
* Enable "'''''Load Balancing'''''"<br />
* If smart meter is connected with RS485 wires, press "'''''Search For Device'''''"<br />
* *'''ONLY If TeltoCharge is unable''' to identify energy meter - use "'''''Manual Setup'''''"<br />
<br />
[[File:Loadbalancing evc16 meter.png|frameless|764x764px]]<br />
<br />
=== General CT settings===<br />
<br />
If you want to enable dynamic load management with a CT, follow the steps below<br />
<br />
* Open user menu<br />
* Open "'''''Installer Menu'''''"<br />
* Open "'''''Load Balancing'''''" menu and select CT.<br />
* Enable "'''''Load Balancing'''''"<br />
* Calibrate the CT clamp, it must be connected to the port but not yet clamped around a wire [[File:Loadbalancing evc16 ct.png|frameless|594x594px]]<br />
<br />
<br />
<br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> Charging modes </h2><br />
<ol style="list-style-type: none; margin: 0; padding: 0;"><br />
<br />
With TeltoCharger chargers, you can achieve three different solar charging modes, each offering unique benefits for various situations:<br><br />
<br />
*'''Solar only charging profile''' - In this profile, the charging process is initiated solely using green energy. The minimum required value is 6 Amps. If there is less surplus energy available than 6 A, the charger will remain in "On hold" mode.<br />
*'''ECO+ charging profile''' - In this profile, the charging process is initiated using a combination of solar energy and grid energy. The user sets the ECO+ surplus minimum value, which determines the minimum surplus energy required to start the charging process. If the set value is less than 6A, the difference in current will be supplemented with grid power.<br />
<br />
Example:<br><br />
''ECO+ surplus minimum value set to 1 A<br>''<br />
0 A (from solar) = charging process is not initiated<br><br />
1 A (from solar) + 5 A (from grid) = 6 A charging current<br><br />
5 A (from solar) + 1 A (from grid) = 6 A charging current<br><br />
10 A (from solar) + 0 A (from grid) = 10 A charging current<br />
*'''ECO charging profile''' - In this profile, the charging process is initiated using maximum available solar energy in combination with grid energy. The user sets the ECO charging minimum value, which determines the minimum charging current. This charging current is first covered by the maximum solar energy available and then supplemented with grid energy.<br />
<br />
Example:<br><br />
''ECO charging minimum value set to 10 A<br>''<br />
If 5 A (from solar) + 5 A (from grid) = 10 A charging current<br><br />
If 9 A (from solar) + 1 A (from grid) = 10 A charging current<br><br />
If 16 A (from solar) + 0 A (from grid) = 16 A charging current<br><br />
If 0 A (from solar) + 10 A (from grid) = 10 A charging current<br />
<br />
<h2 style="color: #4a4a4a; font-size: 24px; font-weight: bold; margin-bottom: 10px;"> Additional information </h2><br />
<ol style="list-style-type: none; margin: 0; padding: 0;"><br />
<br />
There is additional information that is important to know when using solar integration, specifically regarding timers that dictate the start and stop of the charging process. <br><br />
<br><br />
<br />
If the Solar or ECO+ mode is being utilized and there is a sudden shortage of solar power to charge the electric vehicle, the charger will compensate by drawing charging power from the grid for the following 30 seconds and limiting the maximum current to 6 A until enough solar power is available. If no sufficient solar power is available after 30 seconds, the charger will transition to the "On hold" state and await the availability of additional surplus energy. Once there is sufficient surplus energy, the charger initiates a 2-minute timer during which it verifies the sustained presence of enough solar energy. After the 2-minute interval elapses, the charger proceeds to the charging process. <br><br />
<br><br />
<br />
This mechanism ensures that the charging process is flexible and responsive to variations in solar energy availability. By incorporating timers and checks, the charger optimizes the utilization of solar power while maintaining a reliable and efficient charging experience for electric vehicle owners.<br />
<br />
<ul style="list-style-type: none; margin: 0; padding: 0;"><br />
<br />
[[Category: Advanced Topics]]</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=Dynamic_Load_Management_EVC16&diff=5423
Dynamic Load Management EVC16
2026-03-13T13:02:43Z
<p>KarolisS: /* Teltonika Energy App Settings */</p>
<hr />
<div><br />
= Dynamic Load Management =<br />
Dynamic load management is a sophisticated feature that empowers users to efficiently control electric load by managing a group of chargers installed within a single circuit. Through the implementation of modbus RS-485 communication, the chargers are able to communicate with one another and dynamically adjust their charging power in response to the load on the grid, ensuring optimal charging operations and grid stability.<br />
<br />
== DLM Types ==<br />
Dynamic load management (DLM) is a versatile solution applicable in various scenarios, providing users with the flexibility to choose between using it with or without ct clamps. Here are the key distinctions:<br />
<br />
=== DLM with CT Clamps: ===<br />
This configuration is advantageous in the UK, where the use of CT clamps is beneficial for managing the electric load between chargers and other electronic devices. CT clamps enable precise control and optimization of the overall load, contributing to compliance with UK regulations. Their integration into DLM systems assists in efficient energy distribution, which is important for adhering to the energy standards and operational requirements suggested by UK energy authorities.<br />
[[File:Ct clamps.jpg|center|frameless|735x735px]]<br />
== CT Connection ==<br />
Dynamic Load Management (DLM) is achieved through a carefully interconnected system of chargers, where communication is governed by a designated "Master" charger, dictating instructions to the remaining "Slave" chargers. These chargers can be interconnected either in a serial or parallel manner, each requiring the use of UTP twisted pair cables for communication via the A and B pins.<br />
<br />
<br />
[[File:MicrosoftTeams-image (33).png|alt=|frameless|left|[[File:Ct-meter.png|thumb]]]]<br />
[[File:Ct-direction.jpeg|frameless|371x371px|alt=|right]] [[File:Ct-meter.png|frameless|331x331px|alt=|center]]<br />
'''Note :''' The CT cable included in the box is 3 meters long. <br />
* Users can extend it to their desired length, depending on installation conditions such as electrical noise and resistance. <br />
* Recommended extension length is up to 100 meters.<br />
<br />
===DLM with smart meter:===<br />
This configuration enables users to efficiently manage the electric load between chargers and other electronic devices. By leveraging the capabilities of a smart meter, precise control and optimization of the overall load can be achieved.<br />
<br />
[[File:DLM with meter.png|center|frameless|800x800px]]<br />
<br />
<br />
===DLM without external measuring system:===<br />
In cases where the focus is solely on managing the electricity load between chargers and there are no additional electronic devices contributing to the load, this option can be utilized. It offers a simplified approach to load management, tailored specifically to charger interactions.<br />
<br />
<br />
[[File:DLM without meter.png|center|frameless|776x776px]]<br />
<br />
==Teltonika Energy App Settings==<br />
===General meter settings===<br />
If you want to enable dynamic load management with a smart meter, it is important to correctly configure the general meter settings. To ensure everything works correctly, please apply the following setup :<br />
<br />
* Open user menu<br />
* Open "'''''Installer Menu'''''"<br />
* Open "'''''Load Balancing'''''" menu and select Modbus RTU meter.<br />
* Enable "'''''Load Balancing'''''"<br />
* If smart meter is connected with RS485 wires, press "'''''Search For Device'''''"<br />
* *'''ONLY If TeltoCharge is unable''' to identify energy meter - use "'''''Manual Setup'''''"<br />
<br />
[[File:Loadbalancing evc16 meter.png|frameless|764x764px]]<br />
<br />
=== General CT settings===<br />
<br />
If you want to enable dynamic load management with a CT, follow the steps below<br />
<br />
* Open user menu<br />
* Open "'''''Installer Menu'''''"<br />
* Open "'''''Load Balancing'''''" menu and select CT.<br />
* Enable "'''''Load Balancing'''''"<br />
* Calibrate the CT clamp, it must be connected to the port but not yet clamped around a wire [[File:Loadbalancing evc16 ct.png|frameless|594x594px]]<br />
<br />
===Max power from grid===<br />
It is very important to set ''max power from grid'' parameter correctly in the '''PRIMARY''' charger if you want to use DLM. This parameter shows how much current you have in the circuit you want to balance. That means you have to set all available amperes.<br />
<br />
If for example in the Primary charger you will set lower current, DLM might not work correctly and the chargers might not even start the charging process.<br />
<br />
For the secondary chargers, this parameter is not as critical. It is advisable to set it to a maximum of 16 A (for 11 kW chargers) or 32 A (for 7.4/22 kW chargers).<br />
<br />
[[File:Max_Power.png|alt=Max Power DLM|frameless|458x458px]]<br />
<br />
=== Primary Device Configuration ===<br />
The first thing would be to select the '''primary''' device that would control the rest of the group communication protocol between the master-slave and master-meter.<br />
<br />
It should only be enabled for one charger per group only, the primary charger will handle all the calculations, establish communication with the smart meter and control whole group (maximum group size is 20 devices).<br />
<br />
[[File:DLM_primary.png|alt=DLM primary|frameless|856x856px]]<br />
<br />
This setting enabled the charger as the primary charger and allows to change the settings that will affect the whole group:<br />
<br />
1.'''"Primary device"''' – Confirms that this is the primary device that will control the group<br />
<br />
2.'''"Type"'''<br />
<br />
* '''Dynamic''' – using a smart meter to balance<br />
* '''Static''' – balancing only from '''''Max power from grid''''' parameter<br />
<br />
3.'''"Secondary device count"''' the number of secondary devices<br />
<br />
4.'''"Secondary device ID"''' start ID from which chargers will be counted (If it‘s set „2“, the first secondary device must have address 2 and this address must be increased by 1 with each new secondary device<br />
<br />
5.'''"Advanced settings" -''' (More info below)<br />
<br />
6.'''"Check status"''' – possibility to check communication type with secondary devices<br />
<br />
=== Advanced settings ===<br />
Advanced settings are the settings that most of the time are left default. Only on special occasions, those settings must be changed.<br />
<br />
1. '''"Phase connected"''' – detected automatically<br />
<br />
2. '''"Phase sharing mode"''' – type of chargers in group<br />
<br />
3. '''"Current sharing mode"''' – Current is distribution mode<br />
<br />
* Equal - Energy will be distributed equally among all active chargers<br />
* By Priority - Energy will be distributed based on priority. Chargers will be prioritized according to their '''charging state'''.<br />
<br />
4. '''"Communication timeout"''' – delay before warning<br />
<br />
5. '''"Communication settings"''' – settings must be the '''same for all the devices in the group'''<br />
<br />
* RS-485 baud rate<br />
* RS-485 parity<br />
* RS-485 stop bit<br />
<br />
[[File:Advanced_Primary.png|alt=Advanced Primary|frameless|456x456px]]<br />
<br />
=== Secondary device configuration ===<br />
After Primary device configuration, it’s '''mandatory''' to enable '''Dynamic load management''' mode and correctly set-up '''each secondary device'''. (This action must be repeated for each new secondary device)<br />
<br />
For each secondary device few settings must be adjusted:<br />
<br />
* '''Max power from grid''' - It is advisable to set it to a maximum of 16 A (for 11 kW chargers) or 32 A (for 7.4/22 kW chargers)<br />
<br />
* '''Secondary device''' – enabled<br />
* '''Secondary device ID''' – for the first device it must be as set in the master, for each new secondary device this must be increased by 1<br />
* '''Advanced settings''' – must match with the primary device settings<br />
<br />
[[File:Secondary_config.png|frameless|854x854px]]</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=File:Loadbalancing_evc16_ct.png&diff=5422
File:Loadbalancing evc16 ct.png
2026-03-13T13:01:25Z
<p>KarolisS: </p>
<hr />
<div>Loadbalancing evc16 ct</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=Dynamic_Load_Balancing_EVC2&diff=5420
Dynamic Load Balancing EVC2
2026-03-13T12:51:35Z
<p>KarolisS: </p>
<hr />
<div><br />
= DYNAMIC LOAD BALANCING =<br />
EVC2 can communicate with a dedicated smart energy meter and adjust its power consumption based on the meter's readings. This functionality helps protect the home's electrical grid from overload during peak hours and optimizes energy usage to match the user's habits. The smart energy meter should always be installed in the main electrical cabinet, as shown below.<br />
[[File:Dynamic_Load_Balancing_Conection_Schematic.png|alt=|center|frameless|395x395px]]<br />
<br />
=== DLB support ===<br />
We can achieve DLB support by pairing the charger with one of the following:<br />
<br />
* [[Dynamic Load Balancing EVC2#MODBUS RTU METERS|Modbus RTU meters]]<br />
* [[Dynamic Load Balancing EVC2#MODBUS TCP/IP METERS|Modbus TCP/IP meters]]<br />
* [[Dynamic Load Balancing EVC2#CT CLAMPS|CT clamps]]<br />
* [[Dynamic Load Balancing EVC2#EXTERNAL CONTROL|External control]]<br />
* [[Dynamic Load Balancing EVC2#SMARTSTUFF P1 CONVERTER|Smartstuff P1 converter]]<br />
<br />
DLB can then be configured using the app following [[Dynamic Load Balancing EVC2#TELTONIKA ENERGY APP SETTINGS|these instructions]].<br />
<br />
== PHASE BALANCE EXPLANATION ==<br />
TeltoCharge has advanced functionality to detect a car's charging type and, if required, switch phases during mid-charge.<br />
<br />
The same phase switch process will happen if the smart meter detects, that less than 6A is available for one of the phases.<br />
<br />
=== Adaptation to the car's charging capability ===<br />
If the charger is set for 3phase charging, but the plugged car can only draw current from one phase, TeltoCharge will switch to one-phase mode after a short period of time<br />
<br />
[[File:CarExample.png|frameless|493x493px]]<br />
<br />
=== Phase balance during lack of power ===<br />
When the smart meter detects that there is less than 6A for each phase, the charging station will switch from 3phase mode to 1phase mode until 6ampers are available for all phases<br />
<br />
[[File:PhaseSwitch.png|frameless|600x600px]]<br />
<br />
== MODBUS RTU METERS ==<br />
To access energy measurement through Modbus RTU, connect both charger and the meter together using RS485 terminal for meter.<br />
<br />
[[File:DLB meter.png|frameless|808x808px]]<br />
<br />
=== RS485 communication ===<br />
For RS485 communication it is recommended to use a twister pair communication cable. Check example below.<br />
<br />
[[File:TeltoCharge_DLB_CableExample.png|frameless]]<br />
<br />
'''Note:''' ''Communication cable should be integrated with power cable.''<br />
<br />
In order to strive for wider applicability and compatibility, we constantly test and add new supported devices into list. All of the supported energy meters and schematics how to connect them are provided below. <br />
<br />
In order to make '''Dynamic load balancing''' and '''Solar''' functionality work, please always check:<br />
<br />
* if the '''wiring''' your Smart energy meter to EVC2 is right.<br />
* if the '''installer menu configuration''' in mobile application according to your smart energy meter is right.<br />
<br />
=== Supported Modbus RTU models ===<br />
{| class="wikitable" style="text-align: center; border: 1px solid #dddddd; font-family: arial, sans-serif; width: 60%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Energy meter manufacturer<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Technical information<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Configuration in mobile application<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Wiring scheme<br />
|-<br />
| style="padding: 2px;" |Carlo Gavazzi series 1-3 <br />
| style="padding: 2px;" |[[EM and ET models]] <br />
| style="padding: 2px;" |[[Carlo Gavazzi settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/view/EM_and_ET_models#Carlo_Gavazzi_meters_wiring: METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |Siemens PACxxxx <br />
| style="padding: 2px;" |[[PAC models]] <br />
| style="padding: 2px;" |[[Siemens settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/0/0e/Siemens_PAC_Sentron.png METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |ABB A4x ; B2x <br />
| style="padding: 2px;" |[[A and B models]] <br />
| style="padding: 2px;" |[[ABB settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/e/e8/ABB_serie_A%26B_part_1.png METER -> TELTOCHARGE]<br />
|-<br />
| style="padding: 2px;" |Eastron SDMxx <br />
| style="padding: 2px;" |[[SDM models]] <br />
| style="padding: 2px;" |[[Eastron settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/5/53/Eastron_sdm72.png METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |Inepro PRO380 <br />
| style="padding: 2px;" |[[PRO model]]<br />
| style="padding: 2px;" |[[Inepro settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/3/3b/Inepro_pro380.png METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |Chint <br />
| style="padding: 2px;" |[[Chint models]]<br />
| style="padding: 2px;" |[[Chint settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/3/3b/Inepro_pro380.png METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |Entes <br />
| style="padding: 2px;" |[[ES models]]<br />
| style="padding: 2px;" |[[Entes settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/2/21/Entes.png METER -> TELTOCHARGE]<br />
|-<br />
| style="padding: 2px;" |Acrel <br />
| style="padding: 2px;" |[[Acrel models]]<br />
| style="padding: 2px;" |[[Acrel settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/d/d1/Acrel_meter.png METER -> TELTOCHARGE] <br />
|-<br />
| colspan="4" style="padding: 8px;" |''More coming soon...''<br />
|}<br />
<br />
== LOAD BALANCING CONFIGURATION ==<br />
To ensure everything works correctly, please apply the following setup :<br />
<br />
# Open user menu<br />
# Open "'''''Installer Menu'''''"<br />
# Open "'''''Dynamic Load Balancing'''''" menu<br />
# Enable "'''''Load Balancing'''''"<br />
# If smart meter is connected with RS485 wires, press "'''''Search For Device'''''"<br />
# *'''ONLY If TeltoCharge is unable''' to identify energy meter - use "'''''Manual Setup'''''"<br />
<br />
[[File:DLB_settings.png|frameless|989x989px]]<br />
<br />
== MODBUS TCP/IP METERS ==<br />
To access energy measurement through Modbus TCP/IP, connect both the meter and your charger to your network. Charger has two options: either WiFi or ethernet cable. <br />
<br />
=== Connecting Shelly 3PRO ===<br />
Download the '''Shelly smart control''' app and setup the device to connect to your network. After its configured, find the IP address given to the meter.<br />
<br />
[[File:Shelly wiki.png|frameless|935x935px]]<br />
<br />
'''''Note:''' Copy the IP as it will be used in EV charging app to connect the meter to the station''<br />
<br />
=== Connecting HomeWizard P1 ===<br />
Follow this full guide for easy installation: [[Media:HomeWizard P1 guide.pdf|HomeWizard P1.pdf]]<br />
<br />
Or in short - install the HomeWizard meter to the P1 port of your utility meter.<br />
<br />
[[File:Wizard p1 utility meter.png|frameless|284x284px]]<br />
<br />
Download the '''HomeWizard''' app and follow the setup for the meter to connect to your network. After its configured, find the IP address given to the meter.<br />
[[File:Homewizard wiki 1.png|frameless]] [[File:Homewizard wiki 3.png|frameless|592x592px]]<br />
<br />
'''''Note:''' Copy the IP as it will be used in EV charging app to connect the meter to the station''<br />
<br />
=== Load balancing using Network meter ===<br />
A given example below is for Shelly 3Pro smart meter integration, but is identical when using HomeWizard P1.<br />
<br />
To connect the meter to the station, go to '''load balancing''' section in the app, choose '''network meter''' and the model you're using. <br />
<br />
[[File:Shelly DLB 1.png|frameless|938x938px]]<br />
<br />
After that select '''IP address''' as was shown in the Shelly app. Set '''max grid load''' to match the value allowed by the grid. If everything is done right - the status should indicate that the network meter has successfully connected.<br />
<br />
[[File:Shelly DLB 2.png|937x937px]]<br />
<br />
=== Supported Modbus TCP/IP models ===<br />
{| class="wikitable" style="text-align: center; border: 1px solid #dddddd; font-family: arial, sans-serif; width: 60%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Energy meter manufacturer<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Technical information<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Configuration in mobile application<br />
|-<br />
| style="padding: 2px;" |Shelly <br />
| style="padding: 2px;" |3em models <br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/view/Dynamic_Load_Balancing_EVC2#Load_balancing_using_Shelly_3PRO METER -> TELTOCHARGE]<br />
|-<br />
| style="padding: 2px;" |Homewizard <br />
| style="padding: 2px;" |P1 models <br />
| style="padding: 2px;" |tba<br />
|}<br />
<br />
== CT CLAMPS ==<br />
It is possible to measure power readings by connecting CT clamps to each phase. Insert each CT clamp to its dedicated terminal (blue wire to B, red wire to R slot of the terminal).<br />
<br />
<u>Make sure that clamp direction is pointing towards source (away from the charger).</u><br />
<br />
[[File:CT clamps EVC2.png|frameless|529x529px]]<br />
<br />
Recommended CT clamp specifications:<br />
<br />
* Rated input/current - depends on your total power input, but we would recommend not to exceed 150A.<br />
* Turn ratio - 3000:1.<br />
* Burden resistor - CT-Clamp '''must not have integrated burden resistor'''.<br />
<br />
<br />
Choosing to use CT clamp is done via the app in the '''Load balancing''' section. Set '''Max grid load''' to max available amps in your grid (for example: value of your breaker).<br />
<br />
Press calibrate to set the starting point.<br />
<br />
Note: Before calibration, CT clamp has to be connected to the port, but not clamped around the cable.<br />
<br />
[[File:Load balancing ct clamps.png|frameless|804x804px]]<br />
<br />
== EXTERNAL CONTROL ==<br />
This section provides an overview of the Modbus RTU interface supported by TeltoCharge electric vehicle supply equipment (EVSE). The document provides description of the available Modbus registers for the external control and communication with the charger based on a wired RS485 connection. This functionality is only available when the charger is configured as a secondary (server) device and waits for acceptable commands from the primary (client) device. The secondary device can operate on two modes:<br />
<br />
# It can be configured to use a watchdog for communication and if no valid communication is present after a configurable time interval, the charging (if ongoing) will stop and EVSE will not perform any charging until valid communication is reestablished;<br />
# the EVSE does not use a watchdog and continuous communication is not needed. As it is possible to change the EVSE settings by using the TeltoCharge mobile application, it is recommended for the primary device to read, compare, and change settings as needed based on user preferences and real-time requirements, ensuring a seamless and secure charging experience for electric vehicle owners. Continuous monitoring and adjustment of EVSE settings enable the primary device to stay synchronized with user inputs, maintain optimal charging conditions, and promptly respond to any changes initiated through the TeltoCharge mobile application, thereby enhancing overall efficiency and user satisfaction.<br />
<br />
=== Device preparation ===<br />
TeltoCharge must be configured as a secondary device via a TeltoCharge mobile application and device must have RS485 wired connection with the primary device..<br />
<br />
# Open "User menu"<br />
# Open "Installer menu"<br />
# Open "Load Management"<br />
# Select "Secondary"<br />
# Enable secondary device<br />
# Check if the address is expected in your system<br />
<br />
[[File:External.png|frameless|900x900px]] [[File:EVC2_external_controller.png|frameless|460x460px]]<br />
<br />
=== Modbus register map ===<br />
{| class="wikitable"<br />
!Address<br />
!Type<br />
!Name<br />
!Format<br />
!Values<br />
!Default value<br />
!Unit<br />
!Comment<br />
|-<br />
|0<br />
|R<br />
|'''Voltage L1'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|V<br />
|Input voltage on L1<br />
|-<br />
|1<br />
|R<br />
|'''Voltage L2'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|V<br />
|Input voltage on L2<br />
|-<br />
|2<br />
|R<br />
|'''Voltage L3'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|V<br />
|Input voltage on L2<br />
|-<br />
|3<br />
|R<br />
|'''Current L1'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|*10 A<br />
|Current on L1<br />
|-<br />
|4<br />
|R<br />
|'''Current L2'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|*10 A<br />
|Current on L2<br />
|-<br />
|5<br />
|R<br />
|'''Current L3'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|*10 A<br />
|Current on L3<br />
|-<br />
|6<br />
|R<br />
|'''EVSE status'''<br />
|uint16<br />
|0-9<br />
| -<br />
| -<br />
|Evse state in DLM (see "a" below)<br />
|-<br />
|7<br />
|R<br />
|'''EVSE status time 1st word'''<br />
|uint16<br />
| -32768 - 32767<br />
| -<br />
|s<br />
|Evse status time, first word (uint16_t)<br />
|-<br />
|8<br />
|R<br />
|'''EVSE status time 2nd word'''<br />
|uint16<br />
| -32768 - 32767<br />
| -<br />
|s<br />
|Evse status time, second word (uint16_t) >> 16<br />
|-<br />
|9<br />
|R<br />
|'''EVSE ID'''<br />
|uint16<br />
|21571<br />
|21571("TC")<br />
| -<br />
|Teltocharge ID<br />
|-<br />
|10<br />
|R<br />
|'''EVSE 3ph config'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - not possible, 1 - possible<br />
|-<br />
|11<br />
|R<br />
|'''Phase change'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - not possible, 1 - possible<br />
|-<br />
|12<br />
|R<br />
|'''Amp limit'''<br />
|uint16<br />
|0,6-32<br />
| -<br />
|A<br />
|Max amps the EVSE can supply<br />
|-<br />
|13<br />
|R<br />
|'''Phase connected'''<br />
|uint16<br />
|0-6<br />
| -<br />
| -<br />
|0 - L1,<br />
1 - L2, 2 - L3, 3 - L1/L2, 4 - L1/L3, 5 - L2/L3, 6 - 3ph 7 - none<br />
|-<br />
|14<br />
|R/W<br />
|'''Phase to use'''<br />
|uint16<br />
|0-7<br />
| -<br />
| -<br />
|Sets which phase to use for slave,<br />
0 - L1, 1 - L2, 2 - L3, 3 - L1/L2, 4 - L1/L3, 5 - L2/L3, 6 - 3ph, 7 - none<br />
|-<br />
|15<br />
|R/W<br />
|'''Amps to use'''<br />
|uint16<br />
|0, 6-32<br />
| -<br />
|A<br />
|Sets max allowed from primary to secondary<br />
|-<br />
|16<br />
|R/W<br />
|'''Request stop charging'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|Request stop charging<br />
|-<br />
|17<br />
|R/W<br />
|'''Request authorize'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|Request authorization<br />
|-<br />
|18<br />
|R/W<br />
|'''Lock/unlock socket'''<br />
|uint16<br />
|0-2<br />
|0<br />
| -<br />
|0 - auto lock,<br />
1 - always lock, 2 - force unlock in auto mode (resets on state A)<br />
|-<br />
|19<br />
|R/W<br />
|'''Communication timeout'''<br />
|uint16<br />
|0-600<br />
|30<br />
|s<br />
|Defines communication watchdog (0 - no req for periodic comm)<br />
|-<br />
|20<br />
|R/W<br />
|'''Failsafe current'''<br />
|uint16<br />
|0, 6-32<br />
|6<br />
|A<br />
|Defines max allowed current on comm timeout<br />
|-<br />
|21<br />
|R/W<br />
|'''Request reboot'''<br />
|uint16<br />
|0-1<br />
|0<br />
| -<br />
|Request reboot<br />
|-<br />
|22<br />
|R<br />
|'''Require authorization'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|Defines requirement for authorization<br />
|-<br />
|23<br />
|R<br />
|'''Product code'''<br />
|uint16<br />
|0-9999<br />
|1234<br />
| -<br />
|Product code EVCxxxx<br />
|-<br />
|24<br />
|R<br />
|'''Serial number 1st word'''<br />
|<br />
|0-65535<br />
|123456789<br />
|s<br />
|Serial number, first word (uint16_t)<br />
|-<br />
|25<br />
|R<br />
|'''Serial number 2nd word'''<br />
|<br />
|0-65535<br />
|<br />
|s<br />
|Serial number, second word (uint16_t) >> 16<br />
|-<br />
|26<br />
|R<br />
|'''FW version'''<br />
|uint16<br />
|11200-29999<br />
| -<br />
| -<br />
|FW version<br />
|-<br />
|27<br />
|R<br />
|'''Charge point state'''<br />
|uint16<br />
|0-9<br />
| -<br />
| -<br />
|Defines charge point state (see "b" below)<br />
|-<br />
|28<br />
|R<br />
|'''Max power from grid'''<br />
|uint16<br />
|6-1000<br />
|30<br />
| -<br />
|Defines max power from grid<br />
|-<br />
|29<br />
|R<br />
|'''User settable max current'''<br />
|uint16<br />
|6-32<br />
|10<br />
| -<br />
|Defines max settable current by user<br />
|-<br />
|30<br />
|R<br />
|'''Lock status'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - unlocked,<br />
1 - locked<br />
|-<br />
|31<br />
|R<br />
|'''Internal temperature'''<br />
|int16<br />
| -400 - +1250<br />
| -<br />
|*10°C<br />
|Device's temperature<br />
|-<br />
|32<br />
|R<br />
|'''OCPP connected'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - off,<br />
1 - on<br />
|-<br />
|33<br />
|R<br />
|'''IEC state'''<br />
|uint16<br />
|0-8<br />
| -<br />
| -<br />
|IEC state (see "c" below)<br />
|-<br />
|34<br />
|R<br />
|'''Warning code'''<br />
|uint16<br />
|0-65535<br />
| -<br />
| -<br />
|Warning code with bit positions (see "d" below)<br />
|-<br />
|35<br />
|R<br />
|'''Error code'''<br />
|uint16<br />
|0-65535<br />
| -<br />
| -<br />
|Error code with bit positions (see "e" below)<br />
|-<br />
|36<br />
|R<br />
|'''Current limit cause'''<br />
|uint16<br />
|0-8<br />
| -<br />
| -<br />
|Cause of current limit (see "f" below)<br />
|-<br />
|37<br />
|R<br />
|'''Max supported power'''<br />
|uint16<br />
|0-2<br />
| -<br />
| -<br />
|0 - 7.4 kW (1ph 32 A),<br />
1 - 11 kW (3ph 16 A), 2 - 22 kW (3ph 32 A)<br />
|-<br />
|38<br />
|R<br />
|'''Instant active power'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|W<br />
|Instant power<br />
|-<br />
|39<br />
|R<br />
|'''Energy delivered'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power per session<br />
|-<br />
|40<br />
|R<br />
|'''Session duration'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|s<br />
|Session duration<br />
|-<br />
|41<br />
|R<br />
|'''Total kWh supplied 1st word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t)<br />
|-<br />
|42<br />
|R<br />
|'''Total kWh supplied 2nd word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t) >> 16<br />
|-<br />
|43<br />
|R<br />
|'''Total kWh supplied 3rd word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t) >> 32<br />
|-<br />
|44<br />
|R<br />
|'''Total kWh supplied 4th word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t) >> 48<br />
|}<br />
{| class="wikitable"<br />
|+Explanation<br />
|'''a'''<br />
|0 - C: charging;<br />
1 - B1: EV connected, authorization granted, waiting for EV to start charging;<br />
<br />
2 - B2: EV connected, authorization granted, was charging, not enough power;<br />
<br />
3 - B3: EV connected, authorization granted, wasn't charging, not enough power;<br />
<br />
4 - D1: EV connected, charging stopped by EV;<br />
<br />
5 - D2: EV connected, no authorization;<br />
<br />
6 - D3: EV connected, simplified CP or D state charging not allowed;<br />
<br />
7 - A: EV not connected; 8 - F: Error state; 9 - E: Unknown state.<br />
|-<br />
|'''b'''<br />
|0 – no EV connected;<br />
1 – vehicle connected, awaiting permission to charge;<br />
<br />
2 – charging authorized;<br />
<br />
3 – charging in progress;<br />
<br />
4 – charging paused;<br />
<br />
5 – charge successful (EV connected);<br />
<br />
6 – charge stopped by the user;<br />
<br />
7 – charging error;<br />
<br />
8 – charging station reserved, no EV connected;<br />
<br />
9 – other.<br />
|-<br />
|'''c'''<br />
|0 – A: no vehicle connected;<br />
1 – B1: EV connected, pending authorization, no PWM;<br />
<br />
2 – B2: EV connected, EVSE ready for charging, PWM active (state B2);<br />
<br />
3 – C1: ready to charge or stop charge request by EVSE, S2 closed, no PWM;<br />
<br />
4 – C2: charging EV;<br />
<br />
5 – D1: ready to charge or stop charge request by EVSE, S2 closed, ventilation required, no PWM;<br />
<br />
6 – D2: charging EV, ventilation required;<br />
<br />
7 – E: control pilot (CP) fault;<br />
<br />
8 – F: EVSE fault.<br />
|-<br />
|'''d'''<br />
|0 – midplate is open (HW-dependent);<br />
1 – temperature warning;<br />
<br />
2 – current draw is higher than allowed;<br />
<br />
3 – charging requires ventilation;<br />
<br />
4 – real time clock lost;<br />
<br />
5 – simplified cp sequence denied;<br />
<br />
6 – simplified cp sequence detected;<br />
<br />
7 – charging without ventilation denied;<br />
<br />
8 – PEN CT clamp not calibrated (HW-dependent);<br />
<br />
9 – NFC module fault;<br />
<br />
10 – PEN fault was detected (HW-dependent).<br />
|-<br />
|'''e'''<br />
|0 – input voltage not in range;<br />
1 – output voltage not in range;<br />
<br />
2 – current leakage sensor test failed;<br />
<br />
3 – EV diode is failed, or fault in CP line;<br />
<br />
4 – overcurrent error;<br />
<br />
5 – temperature error;<br />
<br />
6 – PEN fault active (UK HW only);<br />
<br />
7 – proximity pilot (cable, socket) error;<br />
<br />
8 – current leakage detected;<br />
<br />
9 – socket lock error;<br />
<br />
10 – internal error.<br />
|-<br />
|'''f'''<br />
|0 – Hardware limits;<br />
1 – Max power from grid;<br />
<br />
2 – User setting (static load balance);<br />
<br />
3 – Charging cable;<br />
<br />
4 – Simple CP sequence;<br />
<br />
5 – EVSE default settings;<br />
<br />
6 – Load balance;<br />
<br />
7 – Temperature.<br />
|}<br />
<br />
== SMARTSTUFF P1 CONVERTER ==<br />
The Modbus P1 Dongle is a device that enables communication between your EVC charging station and a smart meter using the Modbus RS-485 protocol. This setup is essential for accurately monitoring and controlling the energy usage during EV charging sessions.<br />
<br />
* Accurate energy monitoring: Ensures that energy usage data is correctly captured and transmitted.<br />
* Optimized charging: By leveraging the data from the smart meter, the charging station can optimize the charging process, potentially reducing costs and improving efficiency.<br />
<br />
''Note:'' Before proceeding with the installation, please ensure that your smart meter is compatible with the Modbus P1 Dongle.<br />
<br />
=== Smart Meter Connection ===<br />
The dongle is connected to the P1 port of the smart meter via a provided P1 cable. This connection allows the dongle to read energy consumption data directly from the smart meter.<br />
<br />
=== RS-485 Connection ===<br />
The dongle features RS-485 terminals which are critical for establishing communication with the EVC2 system. These terminals are usually labeled as Ground (GND), A+ (positive differential signal), and B- (negative differential signal).<br />
<br />
* To connect the dongle to the EVC2, you'll need to use an appropriate RS-485 cable.<br />
* Connect the 'A+' terminal of your cable to the 'A+' port on the EVC2 device.<br />
* Connect the 'B-' terminal of your cable to the 'B-' port on the EVC2 device.<br />
<br />
''Note :'' In case of communication errors, swapping the 'A+' and 'B-' connections might resolve the issue<br />
<br />
. [[File:EVC2 p1 LB.png|frameless|801x801px]]<blockquote>https://docs.smart-stuff.nl/p1-modbus-dongle/quick-start/installation</blockquote><br />
<br />
=== General meter settings ===<br />
According to your smart meter documentation, please enter all the settings into the Energy app as shown.<br />
<br />
# '''Energy meter type''': You need to select the type of smart meter (1-phase/3-phase). Please note that you can use a 1-phase charger even if the meter is 3-phase.<br />
# '''RS-485 baud rate''': To ensure optimal performance and compatibility with the P1 smart dongle, the RS-485 baud rate must be configured to 38400.<br />
# '''RS-485 parity/stop bit''': Similarly, this information can also be found in the meter settings. If the client is unable to find it, it is advisable to check the smart meter manual.<br />
<br />
{|<br />
|[[File:Smart_stuff.png|left|frameless]]<br />
|[[File:Live_data.png|left|frameless|457x457px]]<br />
|}<br />
{|<br />
|'''''Note:''''' ''Set up the energy meter address'' <br />
<br />
''according to the smart stuff address.''<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|'''''Note:''''' ''After successfully completing these steps,''<br />
<br />
please check the diagnostic live data from the energy meter.<br />
|}<br />
<br />
== TELTONIKA ENERGY APP SETTINGS ==<br />
To ensure everything works correctly, please apply the following setup :<br />
<br />
# Open user menu<br />
# Open "'''''Installer Menu'''''"<br />
# Open "'''''Dynamic Load Balancing'''''" menu<br />
# Enable "'''''Load Balancing'''''"<br />
# If smart meter is connected with RS485 wires, press "'''''Search For Device'''''"<br />
# *'''ONLY If TeltoCharge is unable''' to identify energy meter - use "'''''Manual Setup'''''"<br />
<br />
[[File:DLB_settings.png|frameless|1062x1062px]] <br />
__FORCETOC__</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=Dynamic_Load_Balancing_EVC2&diff=5419
Dynamic Load Balancing EVC2
2026-03-13T12:46:47Z
<p>KarolisS: /* DLB support */</p>
<hr />
<div><br />
= DYNAMIC LOAD BALANCING =<br />
EVC2 can communicate with a dedicated smart energy meter and adjust its power consumption based on the meter's readings. This functionality helps protect the home's electrical grid from overload during peak hours and optimizes energy usage to match the user's habits. The smart energy meter should always be installed in the main electrical cabinet, as shown below.<br />
[[File:Dynamic_Load_Balancing_Conection_Schematic.png|alt=|center|frameless|395x395px]]<br />
<br />
=== DLB support ===<br />
We can achieve DLB support by pairing the charger with one of the following:<br />
<br />
* [[Dynamic Load Balancing EVC2#MODBUS RTU METERS|Modbus RTU meters]]<br />
* [[Dynamic Load Balancing EVC2#MODBUS TCP/IP METERS|Modbus TCP/IP meters]]<br />
* [[Dynamic Load Balancing EVC2#CT CLAMPS|CT clamps]]<br />
* [[Dynamic Load Balancing EVC2#EXTERNAL CONTROL|External control]]<br />
* [[Dynamic Load Balancing EVC2#SMARTSTUFF P1 CONVERTER|Smartstuff P1 converter]]<br />
<br />
DLB can then be configured using the app following [[Dynamic Load Balancing EVC2#TELTONIKA ENERGY APP SETTINGS|these instructions]].<br />
<br />
== PHASE BALANCE EXPLANATION ==<br />
TeltoCharge has advanced functionality to detect a car's charging type and, if required, switch phases during mid-charge.<br />
<br />
The same phase switch process will happen if the smart meter detects, that less than 6A is available for one of the phases.<br />
<br />
=== Adaptation to the car's charging capability ===<br />
If the charger is set for 3phase charging, but the plugged car can only draw current from one phase, TeltoCharge will switch to one-phase mode after a short period of time<br />
<br />
[[File:CarExample.png|frameless|493x493px]]<br />
<br />
=== Phase balance during lack of power ===<br />
When the smart meter detects that there is less than 6A for each phase, the charging station will switch from 3phase mode to 1phase mode until 6ampers are available for all phases<br />
<br />
[[File:PhaseSwitch.png|frameless|600x600px]]<br />
<br />
== MODBUS RTU METERS ==<br />
To access energy measurement through Modbus RTU, connect both charger and the meter together using RS485 terminal for meter.<br />
<br />
[[File:DLB meter.png|frameless|808x808px]]<br />
<br />
=== RS485 communication ===<br />
For RS485 communication it is recommended to use a twister pair communication cable. Check example below.<br />
<br />
[[File:TeltoCharge_DLB_CableExample.png|frameless]]<br />
<br />
'''Note:''' ''Communication cable should be integrated with power cable.''<br />
<br />
In order to strive for wider applicability and compatibility, we constantly test and add new supported devices into list. All of the supported energy meters and schematics how to connect them are provided below. <br />
<br />
In order to make '''Dynamic load balancing''' and '''Solar''' functionality work, please always check:<br />
<br />
* if the '''wiring''' your Smart energy meter to EVC2 is right.<br />
* if the '''installer menu configuration''' in mobile application according to your smart energy meter is right.<br />
<br />
=== Supported Modbus RTU models ===<br />
{| class="wikitable" style="text-align: center; border: 1px solid #dddddd; font-family: arial, sans-serif; width: 60%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Energy meter manufacturer<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Technical information<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Configuration in mobile application<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Wiring scheme<br />
|-<br />
| style="padding: 2px;" |Carlo Gavazzi series 1-3 <br />
| style="padding: 2px;" |[[EM and ET models]] <br />
| style="padding: 2px;" |[[Carlo Gavazzi settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/view/EM_and_ET_models#Carlo_Gavazzi_meters_wiring: METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |Siemens PACxxxx <br />
| style="padding: 2px;" |[[PAC models]] <br />
| style="padding: 2px;" |[[Siemens settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/0/0e/Siemens_PAC_Sentron.png METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |ABB A4x ; B2x <br />
| style="padding: 2px;" |[[A and B models]] <br />
| style="padding: 2px;" |[[ABB settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/e/e8/ABB_serie_A%26B_part_1.png METER -> TELTOCHARGE]<br />
|-<br />
| style="padding: 2px;" |Eastron SDMxx <br />
| style="padding: 2px;" |[[SDM models]] <br />
| style="padding: 2px;" |[[Eastron settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/5/53/Eastron_sdm72.png METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |Inepro PRO380 <br />
| style="padding: 2px;" |[[PRO model]]<br />
| style="padding: 2px;" |[[Inepro settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/3/3b/Inepro_pro380.png METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |Chint <br />
| style="padding: 2px;" |[[Chint models]]<br />
| style="padding: 2px;" |[[Chint settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/3/3b/Inepro_pro380.png METER -> TELTOCHARGE] <br />
|-<br />
| style="padding: 2px;" |Entes <br />
| style="padding: 2px;" |[[ES models]]<br />
| style="padding: 2px;" |[[Entes settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/2/21/Entes.png METER -> TELTOCHARGE]<br />
|-<br />
| style="padding: 2px;" |Acrel <br />
| style="padding: 2px;" |[[Acrel models]]<br />
| style="padding: 2px;" |[[Acrel settings]]<br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/images/d/d1/Acrel_meter.png METER -> TELTOCHARGE] <br />
|-<br />
| colspan="4" style="padding: 8px;" |''More coming soon...''<br />
|}<br />
<br />
== MODBUS TCP/IP METERS ==<br />
To access energy measurement through Modbus TCP/IP, connect both the meter and your charger to your network. Charger has two options: either WiFi or ethernet cable. <br />
<br />
=== Connecting Shelly 3PRO ===<br />
Download the '''Shelly smart control''' app and setup the device to connect to your network. After its configured, find the IP address given to the meter.<br />
<br />
[[File:Shelly wiki.png|frameless|935x935px]]<br />
<br />
'''''Note:''' Copy the IP as it will be used in EV charging app to connect the meter to the station''<br />
<br />
=== Connecting HomeWizard P1 ===<br />
Follow this full guide for easy installation: [[Media:HomeWizard P1 guide.pdf|HomeWizard P1.pdf]]<br />
<br />
Or in short - install the HomeWizard meter to the P1 port of your utility meter.<br />
<br />
[[File:Wizard p1 utility meter.png|frameless|284x284px]]<br />
<br />
Download the '''HomeWizard''' app and follow the setup for the meter to connect to your network. After its configured, find the IP address given to the meter.<br />
[[File:Homewizard wiki 1.png|frameless]] [[File:Homewizard wiki 3.png|frameless|592x592px]]<br />
<br />
'''''Note:''' Copy the IP as it will be used in EV charging app to connect the meter to the station''<br />
<br />
=== Load balancing using Network meter ===<br />
A given example below is for Shelly 3Pro smart meter integration, but is identical when using HomeWizard P1.<br />
<br />
To connect the meter to the station, go to '''load balancing''' section in the app, choose '''network meter''' and the model you're using. <br />
<br />
[[File:Shelly DLB 1.png|frameless|938x938px]]<br />
<br />
After that select '''IP address''' as was shown in the Shelly app. Set '''max grid load''' to match the value allowed by the grid. If everything is done right - the status should indicate that the network meter has successfully connected.<br />
<br />
[[File:Shelly DLB 2.png|937x937px]]<br />
<br />
=== Supported Modbus TCP/IP models ===<br />
{| class="wikitable" style="text-align: center; border: 1px solid #dddddd; font-family: arial, sans-serif; width: 60%;"<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Energy meter manufacturer<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Technical information<br />
! style="background-color: #0054A6; color:#FFFFFF; padding: 8px;" |Configuration in mobile application<br />
|-<br />
| style="padding: 2px;" |Shelly <br />
| style="padding: 2px;" |3em models <br />
| style="padding: 2px;" |[https://wiki.teltonika-energy.com/view/Dynamic_Load_Balancing_EVC2#Load_balancing_using_Shelly_3PRO METER -> TELTOCHARGE]<br />
|-<br />
| style="padding: 2px;" |Homewizard <br />
| style="padding: 2px;" |P1 models <br />
| style="padding: 2px;" |tba<br />
|}<br />
<br />
== CT CLAMPS ==<br />
It is possible to measure power readings by connecting CT clamps to each phase. Insert each CT clamp to its dedicated terminal (blue wire to B, red wire to R slot of the terminal).<br />
<br />
<u>Make sure that clamp direction is pointing towards source (away from the charger).</u><br />
<br />
[[File:CT clamps EVC2.png|frameless|529x529px]]<br />
<br />
Recommended CT clamp specifications:<br />
<br />
* Rated input/current - depends on your total power input, but we would recommend not to exceed 150A.<br />
* Turn ratio - 3000:1.<br />
* Burden resistor - CT-Clamp '''must not have integrated burden resistor'''.<br />
<br />
<br />
Choosing to use CT clamp is done via the app in the '''Load balancing''' section. Set '''Max grid load''' to max available amps in your grid (for example: value of your breaker).<br />
<br />
Press calibrate to set the starting point.<br />
<br />
Note: Before calibration, CT clamp has to be connected to the port, but not clamped around the cable.<br />
<br />
[[File:Load balancing ct clamps.png|frameless|804x804px]]<br />
<br />
== EXTERNAL CONTROL ==<br />
This section provides an overview of the Modbus RTU interface supported by TeltoCharge electric vehicle supply equipment (EVSE). The document provides description of the available Modbus registers for the external control and communication with the charger based on a wired RS485 connection. This functionality is only available when the charger is configured as a secondary (server) device and waits for acceptable commands from the primary (client) device. The secondary device can operate on two modes:<br />
<br />
# It can be configured to use a watchdog for communication and if no valid communication is present after a configurable time interval, the charging (if ongoing) will stop and EVSE will not perform any charging until valid communication is reestablished;<br />
# the EVSE does not use a watchdog and continuous communication is not needed. As it is possible to change the EVSE settings by using the TeltoCharge mobile application, it is recommended for the primary device to read, compare, and change settings as needed based on user preferences and real-time requirements, ensuring a seamless and secure charging experience for electric vehicle owners. Continuous monitoring and adjustment of EVSE settings enable the primary device to stay synchronized with user inputs, maintain optimal charging conditions, and promptly respond to any changes initiated through the TeltoCharge mobile application, thereby enhancing overall efficiency and user satisfaction.<br />
<br />
=== Device preparation ===<br />
TeltoCharge must be configured as a secondary device via a TeltoCharge mobile application and device must have RS485 wired connection with the primary device..<br />
<br />
# Open "User menu"<br />
# Open "Installer menu"<br />
# Open "Load Management"<br />
# Select "Secondary"<br />
# Enable secondary device<br />
# Check if the address is expected in your system<br />
<br />
[[File:External.png|frameless|900x900px]] [[File:EVC2_external_controller.png|frameless|460x460px]]<br />
<br />
=== Modbus register map ===<br />
{| class="wikitable"<br />
!Address<br />
!Type<br />
!Name<br />
!Format<br />
!Values<br />
!Default value<br />
!Unit<br />
!Comment<br />
|-<br />
|0<br />
|R<br />
|'''Voltage L1'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|V<br />
|Input voltage on L1<br />
|-<br />
|1<br />
|R<br />
|'''Voltage L2'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|V<br />
|Input voltage on L2<br />
|-<br />
|2<br />
|R<br />
|'''Voltage L3'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|V<br />
|Input voltage on L2<br />
|-<br />
|3<br />
|R<br />
|'''Current L1'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|*10 A<br />
|Current on L1<br />
|-<br />
|4<br />
|R<br />
|'''Current L2'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|*10 A<br />
|Current on L2<br />
|-<br />
|5<br />
|R<br />
|'''Current L3'''<br />
|int16<br />
| -32768 - 32767<br />
| -<br />
|*10 A<br />
|Current on L3<br />
|-<br />
|6<br />
|R<br />
|'''EVSE status'''<br />
|uint16<br />
|0-9<br />
| -<br />
| -<br />
|Evse state in DLM (see "a" below)<br />
|-<br />
|7<br />
|R<br />
|'''EVSE status time 1st word'''<br />
|uint16<br />
| -32768 - 32767<br />
| -<br />
|s<br />
|Evse status time, first word (uint16_t)<br />
|-<br />
|8<br />
|R<br />
|'''EVSE status time 2nd word'''<br />
|uint16<br />
| -32768 - 32767<br />
| -<br />
|s<br />
|Evse status time, second word (uint16_t) >> 16<br />
|-<br />
|9<br />
|R<br />
|'''EVSE ID'''<br />
|uint16<br />
|21571<br />
|21571("TC")<br />
| -<br />
|Teltocharge ID<br />
|-<br />
|10<br />
|R<br />
|'''EVSE 3ph config'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - not possible, 1 - possible<br />
|-<br />
|11<br />
|R<br />
|'''Phase change'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - not possible, 1 - possible<br />
|-<br />
|12<br />
|R<br />
|'''Amp limit'''<br />
|uint16<br />
|0,6-32<br />
| -<br />
|A<br />
|Max amps the EVSE can supply<br />
|-<br />
|13<br />
|R<br />
|'''Phase connected'''<br />
|uint16<br />
|0-6<br />
| -<br />
| -<br />
|0 - L1,<br />
1 - L2, 2 - L3, 3 - L1/L2, 4 - L1/L3, 5 - L2/L3, 6 - 3ph 7 - none<br />
|-<br />
|14<br />
|R/W<br />
|'''Phase to use'''<br />
|uint16<br />
|0-7<br />
| -<br />
| -<br />
|Sets which phase to use for slave,<br />
0 - L1, 1 - L2, 2 - L3, 3 - L1/L2, 4 - L1/L3, 5 - L2/L3, 6 - 3ph, 7 - none<br />
|-<br />
|15<br />
|R/W<br />
|'''Amps to use'''<br />
|uint16<br />
|0, 6-32<br />
| -<br />
|A<br />
|Sets max allowed from primary to secondary<br />
|-<br />
|16<br />
|R/W<br />
|'''Request stop charging'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|Request stop charging<br />
|-<br />
|17<br />
|R/W<br />
|'''Request authorize'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|Request authorization<br />
|-<br />
|18<br />
|R/W<br />
|'''Lock/unlock socket'''<br />
|uint16<br />
|0-2<br />
|0<br />
| -<br />
|0 - auto lock,<br />
1 - always lock, 2 - force unlock in auto mode (resets on state A)<br />
|-<br />
|19<br />
|R/W<br />
|'''Communication timeout'''<br />
|uint16<br />
|0-600<br />
|30<br />
|s<br />
|Defines communication watchdog (0 - no req for periodic comm)<br />
|-<br />
|20<br />
|R/W<br />
|'''Failsafe current'''<br />
|uint16<br />
|0, 6-32<br />
|6<br />
|A<br />
|Defines max allowed current on comm timeout<br />
|-<br />
|21<br />
|R/W<br />
|'''Request reboot'''<br />
|uint16<br />
|0-1<br />
|0<br />
| -<br />
|Request reboot<br />
|-<br />
|22<br />
|R<br />
|'''Require authorization'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|Defines requirement for authorization<br />
|-<br />
|23<br />
|R<br />
|'''Product code'''<br />
|uint16<br />
|0-9999<br />
|1234<br />
| -<br />
|Product code EVCxxxx<br />
|-<br />
|24<br />
|R<br />
|'''Serial number 1st word'''<br />
|<br />
|0-65535<br />
|123456789<br />
|s<br />
|Serial number, first word (uint16_t)<br />
|-<br />
|25<br />
|R<br />
|'''Serial number 2nd word'''<br />
|<br />
|0-65535<br />
|<br />
|s<br />
|Serial number, second word (uint16_t) >> 16<br />
|-<br />
|26<br />
|R<br />
|'''FW version'''<br />
|uint16<br />
|11200-29999<br />
| -<br />
| -<br />
|FW version<br />
|-<br />
|27<br />
|R<br />
|'''Charge point state'''<br />
|uint16<br />
|0-9<br />
| -<br />
| -<br />
|Defines charge point state (see "b" below)<br />
|-<br />
|28<br />
|R<br />
|'''Max power from grid'''<br />
|uint16<br />
|6-1000<br />
|30<br />
| -<br />
|Defines max power from grid<br />
|-<br />
|29<br />
|R<br />
|'''User settable max current'''<br />
|uint16<br />
|6-32<br />
|10<br />
| -<br />
|Defines max settable current by user<br />
|-<br />
|30<br />
|R<br />
|'''Lock status'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - unlocked,<br />
1 - locked<br />
|-<br />
|31<br />
|R<br />
|'''Internal temperature'''<br />
|int16<br />
| -400 - +1250<br />
| -<br />
|*10°C<br />
|Device's temperature<br />
|-<br />
|32<br />
|R<br />
|'''OCPP connected'''<br />
|uint16<br />
|0-1<br />
| -<br />
| -<br />
|0 - off,<br />
1 - on<br />
|-<br />
|33<br />
|R<br />
|'''IEC state'''<br />
|uint16<br />
|0-8<br />
| -<br />
| -<br />
|IEC state (see "c" below)<br />
|-<br />
|34<br />
|R<br />
|'''Warning code'''<br />
|uint16<br />
|0-65535<br />
| -<br />
| -<br />
|Warning code with bit positions (see "d" below)<br />
|-<br />
|35<br />
|R<br />
|'''Error code'''<br />
|uint16<br />
|0-65535<br />
| -<br />
| -<br />
|Error code with bit positions (see "e" below)<br />
|-<br />
|36<br />
|R<br />
|'''Current limit cause'''<br />
|uint16<br />
|0-8<br />
| -<br />
| -<br />
|Cause of current limit (see "f" below)<br />
|-<br />
|37<br />
|R<br />
|'''Max supported power'''<br />
|uint16<br />
|0-2<br />
| -<br />
| -<br />
|0 - 7.4 kW (1ph 32 A),<br />
1 - 11 kW (3ph 16 A), 2 - 22 kW (3ph 32 A)<br />
|-<br />
|38<br />
|R<br />
|'''Instant active power'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|W<br />
|Instant power<br />
|-<br />
|39<br />
|R<br />
|'''Energy delivered'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power per session<br />
|-<br />
|40<br />
|R<br />
|'''Session duration'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|s<br />
|Session duration<br />
|-<br />
|41<br />
|R<br />
|'''Total kWh supplied 1st word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t)<br />
|-<br />
|42<br />
|R<br />
|'''Total kWh supplied 2nd word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t) >> 16<br />
|-<br />
|43<br />
|R<br />
|'''Total kWh supplied 3rd word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t) >> 32<br />
|-<br />
|44<br />
|R<br />
|'''Total kWh supplied 4th word'''<br />
|uint16<br />
|0-65535<br />
| -<br />
|*100kWh<br />
|Total supplied active power in a lifetime (uint16_t) >> 48<br />
|}<br />
{| class="wikitable"<br />
|+Explanation<br />
|'''a'''<br />
|0 - C: charging;<br />
1 - B1: EV connected, authorization granted, waiting for EV to start charging;<br />
<br />
2 - B2: EV connected, authorization granted, was charging, not enough power;<br />
<br />
3 - B3: EV connected, authorization granted, wasn't charging, not enough power;<br />
<br />
4 - D1: EV connected, charging stopped by EV;<br />
<br />
5 - D2: EV connected, no authorization;<br />
<br />
6 - D3: EV connected, simplified CP or D state charging not allowed;<br />
<br />
7 - A: EV not connected; 8 - F: Error state; 9 - E: Unknown state.<br />
|-<br />
|'''b'''<br />
|0 – no EV connected;<br />
1 – vehicle connected, awaiting permission to charge;<br />
<br />
2 – charging authorized;<br />
<br />
3 – charging in progress;<br />
<br />
4 – charging paused;<br />
<br />
5 – charge successful (EV connected);<br />
<br />
6 – charge stopped by the user;<br />
<br />
7 – charging error;<br />
<br />
8 – charging station reserved, no EV connected;<br />
<br />
9 – other.<br />
|-<br />
|'''c'''<br />
|0 – A: no vehicle connected;<br />
1 – B1: EV connected, pending authorization, no PWM;<br />
<br />
2 – B2: EV connected, EVSE ready for charging, PWM active (state B2);<br />
<br />
3 – C1: ready to charge or stop charge request by EVSE, S2 closed, no PWM;<br />
<br />
4 – C2: charging EV;<br />
<br />
5 – D1: ready to charge or stop charge request by EVSE, S2 closed, ventilation required, no PWM;<br />
<br />
6 – D2: charging EV, ventilation required;<br />
<br />
7 – E: control pilot (CP) fault;<br />
<br />
8 – F: EVSE fault.<br />
|-<br />
|'''d'''<br />
|0 – midplate is open (HW-dependent);<br />
1 – temperature warning;<br />
<br />
2 – current draw is higher than allowed;<br />
<br />
3 – charging requires ventilation;<br />
<br />
4 – real time clock lost;<br />
<br />
5 – simplified cp sequence denied;<br />
<br />
6 – simplified cp sequence detected;<br />
<br />
7 – charging without ventilation denied;<br />
<br />
8 – PEN CT clamp not calibrated (HW-dependent);<br />
<br />
9 – NFC module fault;<br />
<br />
10 – PEN fault was detected (HW-dependent).<br />
|-<br />
|'''e'''<br />
|0 – input voltage not in range;<br />
1 – output voltage not in range;<br />
<br />
2 – current leakage sensor test failed;<br />
<br />
3 – EV diode is failed, or fault in CP line;<br />
<br />
4 – overcurrent error;<br />
<br />
5 – temperature error;<br />
<br />
6 – PEN fault active (UK HW only);<br />
<br />
7 – proximity pilot (cable, socket) error;<br />
<br />
8 – current leakage detected;<br />
<br />
9 – socket lock error;<br />
<br />
10 – internal error.<br />
|-<br />
|'''f'''<br />
|0 – Hardware limits;<br />
1 – Max power from grid;<br />
<br />
2 – User setting (static load balance);<br />
<br />
3 – Charging cable;<br />
<br />
4 – Simple CP sequence;<br />
<br />
5 – EVSE default settings;<br />
<br />
6 – Load balance;<br />
<br />
7 – Temperature.<br />
|}<br />
<br />
== SMARTSTUFF P1 CONVERTER ==<br />
The Modbus P1 Dongle is a device that enables communication between your EVC charging station and a smart meter using the Modbus RS-485 protocol. This setup is essential for accurately monitoring and controlling the energy usage during EV charging sessions.<br />
<br />
* Accurate energy monitoring: Ensures that energy usage data is correctly captured and transmitted.<br />
* Optimized charging: By leveraging the data from the smart meter, the charging station can optimize the charging process, potentially reducing costs and improving efficiency.<br />
<br />
''Note:'' Before proceeding with the installation, please ensure that your smart meter is compatible with the Modbus P1 Dongle.<br />
<br />
=== Smart Meter Connection ===<br />
The dongle is connected to the P1 port of the smart meter via a provided P1 cable. This connection allows the dongle to read energy consumption data directly from the smart meter.<br />
<br />
=== RS-485 Connection ===<br />
The dongle features RS-485 terminals which are critical for establishing communication with the EVC2 system. These terminals are usually labeled as Ground (GND), A+ (positive differential signal), and B- (negative differential signal).<br />
<br />
* To connect the dongle to the EVC2, you'll need to use an appropriate RS-485 cable.<br />
* Connect the 'A+' terminal of your cable to the 'A+' port on the EVC2 device.<br />
* Connect the 'B-' terminal of your cable to the 'B-' port on the EVC2 device.<br />
<br />
''Note :'' In case of communication errors, swapping the 'A+' and 'B-' connections might resolve the issue<br />
<br />
. [[File:EVC2 p1 LB.png|frameless|801x801px]]<blockquote>https://docs.smart-stuff.nl/p1-modbus-dongle/quick-start/installation</blockquote><br />
<br />
=== General meter settings ===<br />
According to your smart meter documentation, please enter all the settings into the Energy app as shown.<br />
<br />
# '''Energy meter type''': You need to select the type of smart meter (1-phase/3-phase). Please note that you can use a 1-phase charger even if the meter is 3-phase.<br />
# '''RS-485 baud rate''': To ensure optimal performance and compatibility with the P1 smart dongle, the RS-485 baud rate must be configured to 38400.<br />
# '''RS-485 parity/stop bit''': Similarly, this information can also be found in the meter settings. If the client is unable to find it, it is advisable to check the smart meter manual.<br />
<br />
{|<br />
|[[File:Smart_stuff.png|left|frameless]]<br />
|[[File:Live_data.png|left|frameless|457x457px]]<br />
|}<br />
{|<br />
|'''''Note:''''' ''Set up the energy meter address'' <br />
<br />
''according to the smart stuff address.''<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|'''''Note:''''' ''After successfully completing these steps,''<br />
<br />
please check the diagnostic live data from the energy meter.<br />
|}<br />
<br />
== TELTONIKA ENERGY APP SETTINGS ==<br />
To ensure everything works correctly, please apply the following setup :<br />
<br />
# Open user menu<br />
# Open "'''''Installer Menu'''''"<br />
# Open "'''''Dynamic Load Balancing'''''" menu<br />
# Enable "'''''Load Balancing'''''"<br />
# If smart meter is connected with RS485 wires, press "'''''Search For Device'''''"<br />
# *'''ONLY If TeltoCharge is unable''' to identify energy meter - use "'''''Manual Setup'''''"<br />
<br />
[[File:DLB_settings.png|frameless|1062x1062px]] <br />
__FORCETOC__</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=File:Loadbalancing_evc16_meter.png&diff=5418
File:Loadbalancing evc16 meter.png
2026-03-13T12:41:59Z
<p>KarolisS: </p>
<hr />
<div>Loadbalancing evc16 meter</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=File:EVC-solar-modes.png&diff=5415
File:EVC-solar-modes.png
2026-03-13T10:24:34Z
<p>KarolisS: </p>
<hr />
<div>EVC-solar-modes</div>
KarolisS
https://wiki.teltonika-energy.com/index.php?title=Compatible_Software_Providers_for_OCPP_Integration&diff=5414
Compatible Software Providers for OCPP Integration
2026-03-13T10:22:36Z
<p>KarolisS: </p>
<hr />
<div> __TOC__<br />
<br />
= Integrating Teltonika EVC stations with OCPP 1.6 JSON =<br />
This guide explains how to integrate '''Teltonika EVC stations''' with your existing system using the OCPP 1.6 JSON protocol.<br />
<br />
== Getting started ==<br />
Before you begin, you will need the following:<br />
<br />
* Teltonika EVC station is installed and configured.<br />
* Teltonika EVC station has access to the internet.<br />
* Knowledge of the OCPP 1.6 JSON protocol.<br />
<br />
== Steps ==<br />
1. Configure the charging station to connect to your OCPP 1.6 JSON server. You will need to know the IP address or domain name of your server and the port number for the OCPP 1.6 JSON protocol.<br />
<br />
2. Set up a charging station account on your OCPP 1.6 JSON server. You will need to provide the following information:<br />
* Charging station ID: This is a unique identifier for your charging station.<br />
* Charging station type: Specify the type of charging station you have. (AC)<br />
* Other settings as required by your OCPP 1.6 JSON server.<br />
3. Connect the charging station to your OCPP 1.6 JSON server. The charging station will communicate with your server using the OCPP 1.6 JSON protocol.<br />
<br />
4. Test the connection by starting a charging session from your OCPP 1.6 JSON server.<br />
<br />
5. Monitor the charging station from your OCPP 1.6 JSON server. You will be able to view the charging status, energy usage, and other important information about the charging station '''(for configuration keys available at the moment from Teltonika EVC station please communicate with your Sales manager or directly through Teltonika Energy VIP HelpDesk)'''.<br />
<br />
== How to connect Teltonika EVC stations to chosen OCPP provider ==<br />
<br />
* '''Connect Teltonika EVC station to the internet''' - make sure, that the charging station has the internet connection. (all types are acceptable)<br />
<br />
[[File:Connectivity_for_OCPP.png|frameless|990x990px]]<br />
<br />
* '''Connect Teltonika EVC station to the chosen OCPP server'''<br />
<br />
<u>OCPP provider must give you info about:</u><br />
<br />
# '''URL address''' - URL address must end with "/"<br />
# '''Charge point ID''' - Most of the time it's the serial number of the charging station<br />
<br />
When you have that information, insert it as shown in the picture below and press save.<br />
<br />
[[File:OCPP_settings2.png|frameless]]<br />
<br />
= COMPATIBLE SOFTWARE PROVIDERS FOR OCPP INTEGRATION =<br />
This section provides an overview of the software providers that have been tested and proven compatible with Teltonika EVC station using the OCPP 1.6 JSON (Open Charge Point Protocol).<br />
<br />
→For detailed Teltonika EVC stations OCPP documentation contact Teltonika Energy Technical Support team via HelpDesk.←<br />
<br />
<u>Segments description:</u><br />
<br />
* '''Public Charging Networks''' - managing large networks of public EV charging stations.<br />
<br />
Real-time monitoring, dynamic pricing, user authentication, remote diagnostics, and reporting.<br />
<br />
* '''Commercial and Fleet Charging''' - supporting commercial fleets and workplace charging solutions.<br />
<br />
Fleet management tools, scheduled charging, energy usage reporting, and integration with fleet management systems.<br />
<br />
* '''Residential Charging Solutions''' - providing home EV charging management for individual users.<br />
<br />
User-friendly interfaces, mobile app control, energy usage tracking, and integration with smart home systems.<br />
<br />
* '''Retail and Hospitality Charging''' - offering EV charging as an amenity at retail locations, hotels, and restaurants.<br />
<br />
Customer engagement tools, loyalty programs integration, payment processing, and usage analytics.<br />
<br />
== Tested Software Providers ==<br />
The software providers listed here have undergone comprehensive testing with Teltonika EVC station hardware, ensuring that they meet standards for performance and reliability.<br />
<br />
* For integration of your OCPP software, please contact Teltonika Energy Technical Support team via HelpDesk.<br />
<br />
==List of supported platforms==<br />
{| class="wikitable" style="width: 80%;"<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center; font-size: 18px;" |'''Software Vendor'''<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center; font-size: 18px;" |'''Public Charging Networks'''<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center; font-size: 18px;" |'''Commercial and Fleet Charging'''<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center; font-size: 18px;" |'''Residential Charging Solutions'''<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center; font-size: 18px;" |'''Retail and Hospitality Charging'''<br />
! style="width: 15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center; font-size: 18px;" |'''Official page'''<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white; font-size: 18px;" |Focus EV<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[https://www.radiuscharge.com/products/software/ FOCUS EV]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white; font-size: 18px;" |Monta<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[https://monta.com/uk/#dropdown MONTA]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white; font-size: 18px;" |EEVY<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[https://eevy-charge.com/en/ EEVY]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white; font-size: 18px;" |Ampeco<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[https://www.ampeco.com/ev-charging-platform/ AMPECO]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white; font-size: 18px;" |LastMilesSolutions<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[https://www.lastmilesolutions.com/ LMS]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white; font-size: 18px;" |GreenFlux<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[https://www.greenflux.com/ GREENFLUX]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white; font-size: 18px;" |SaasCharge<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[https://saascharge.com/ SAASCHARGE]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white; font-size: 18px;" |Daloop<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[https://daloop.io/ DALOOP]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white; font-size: 18px;" |Go To-U<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[https://go-tou.com/en GO TO-U]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white; font-size: 18px;" |Tap Electric<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[https://www.tapelectric.app/ TAP ELECTRIC]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white; font-size: 18px;" |Clenergy EV<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[https://www.clenergy-ev.com/ Clenergy EV]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white; font-size: 18px;" |Enerlink<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[https://www.enerlink.com/ ENERLINK]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white; font-size: 18px;" |E-Flux<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[https://www.e-flux.io/ E-FLUX]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white; font-size: 18px;" |PlugFuse<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[https://plug-fuse.com/ PLUGFUSE]<br />
|-<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white; font-size: 18px;" |eMabler<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" | +<br />
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |[https://www.emabler.com/ eMABLER]<br />
|-<br />
|}<br />
<br />
= OCPP IMPLEMENTATION =<br />
Our station can accept various messages and configuration keys. The following is a list of supported standard messages, key names and values<br />
{| class="wikitable"<br />
|+<br />
! colspan="2" |Supported messages<br />
|-<br />
!Message<br />
!Comment<br />
|-<br />
|Authorize<br />
|<br />
|-<br />
|BootNotification<br />
|<br />
|-<br />
|ChangeAvailability<br />
|<br />
|-<br />
|ChangeConfiguration<br />
|<br />
|-<br />
|ClearCache<br />
|Authorization Cache with max 20 entries<br />
|-<br />
|DataTransfer<br />
|No custom commands<br />
|-<br />
|GetConfiguration<br />
|Max 60 elements per request<br />
|-<br />
|Heartbeat<br />
|<br />
|-<br />
|MeterValues<br />
|In MeterValuesSampledData, MeterValuesAlignedData and StopTxnSampledData only.<br />
Supported measurands: Energy.Active.Import.Register,Current.Import,Current.Offered, Temperature,Voltage,Power.Active.Import. ''Minimum interval 5s''<br />
|-<br />
|RemoteStartTransaction<br />
|<br />
|-<br />
|RemoteStopTransaction<br />
|<br />
|-<br />
|Reset<br />
|<br />
|-<br />
|StartTransaction<br />
|<br />
|-<br />
|StopTransaction<br />
|<br />
|-<br />
|StatusNotification<br />
|<br />
|-<br />
|UnlockConnector<br />
|For socket version charger only<br />
|-<br />
! colspan="2" |Local Auth List Management<br />
|-<br />
|GetLocalListVersion<br />
|<br />
|-<br />
|SendLocalList<br />
|<br />
|-<br />
|LocalAuthListMaxLength<br />
|Max 50 entries<br />
|-<br />
! colspan="2" |Smart Charging<br />
|-<br />
|SetChargingProfile<br />
|<br />
|-<br />
|GetCompositeSchedule<br />
|Max GetCompositeSchedule.req duration 24h<br />
|-<br />
|ClearChargingProfile<br />
|<br />
|-<br />
! colspan="2" |Remote Trigger<br />
|-<br />
|TriggerMessage<br />
|<br />
|-<br />
| colspan="2" |Reservation<br />
|-<br />
|ReserveNow<br />
|<br />
|-<br />
|CancelReservation<br />
|<br />
|-<br />
! colspan="2" |Firmware Management<br />
|-<br />
|GetDiagnostics<br />
|<br />
|-<br />
|DiagnosticsStatusNotification<br />
|<br />
|-<br />
|FirmwareStatusNotification<br />
|<br />
|-<br />
|UpdateFirmware<br />
|<br />
|-<br />
! colspan="2" |Improved Security<br />
|-<br />
|CertificateSigned<br />
|<br />
|-<br />
|ExtendedTriggerMessage<br />
|<br />
|-<br />
|GetInstalledCertificateIds<br />
|Only CentralSystemRootCertificate type is supported<br />
|-<br />
|GetLog<br />
|<br />
|-<br />
|InstallCertificate<br />
|Only CentralSystemRootCertificate type is supported<br />
|-<br />
|LogStatusNotification<br />
|<br />
|-<br />
|SecurityEventNotification<br />
|Only ReconfigurationOfSecurityParameters, SettingSystemTime, SecurityLogWasCleared,<br />
StartupOfTheDevice, ResetOrReboot, FirmwareUpdated notifications are used<br />
|-<br />
|SignCertificate<br />
|<br />
|}<br />
{| class="wikitable"<br />
! colspan="4" |Supported Configuration Key Names & Values<br />
|-<br />
! colspan="2" rowspan="2" |Key<br />
! colspan="2" |Values<br />
|-<br />
!Default<br />
!Supported range<br />
|-<br />
! colspan="4" |Core<br />
|-<br />
| colspan="2" |AllowOfflineTxForUnknownId<br />
|0<br />
|0, 1<br />
|-<br />
| colspan="2" |AuthorizeRemoteTxRequests<br />
|1<br />
|0, 1<br />
|-<br />
| colspan="2" |AuthorizationCacheEnabled<br />
|1<br />
|0, 1<br />
|-<br />
| colspan="2" |ClockAlignedDataInterval<br />
|3600<br />
|300-86400<br />
|-<br />
| colspan="2" |ConnectionTimeOut<br />
|120<br />
|1-3600<br />
|-<br />
| colspan="2" |ConnectorPhaseRotation<br />
|Unknown<br />
|Unknown,RST,RTS,SRT, STR,TRS,TSR<br />
|-<br />
| colspan="2" |GetConfigurationMaxKeys<br />
|60<br />
| -<br />
|-<br />
| colspan="2" |HeartbeatInterval<br />
|3600<br />
|60-86400<br />
|-<br />
| colspan="2" |LocalAuthorizeOffline<br />
|0<br />
|0, 1<br />
|-<br />
| colspan="2" |LocalPreAuthorize<br />
|1<br />
|0, 1<br />
|-<br />
| colspan="2" |MeterValuesAlignedData<br />
|""<br />
|Energy.Active.Import.Register,Current.Import,Current.Offered,<br />
Temperature,Voltage,Power.Active.Import<br />
|-<br />
| colspan="2" |MeterValuesSampledData<br />
|Energy.Active.Import.Register<br />
|Energy.Active.Import.Register,Current.Import,Current.Offered,<br />
Temperature,Voltage,Power.Active.Import<br />
|-<br />
| colspan="2" |MeterValueSampleInterval<br />
|3600<br />
|5-84600<br />
|-<br />
| colspan="2" |NumberOfConnectors<br />
|1<br />
| -<br />
|-<br />
| colspan="2" |ResetRetries<br />
|10<br />
|0-10<br />
|-<br />
| colspan="2" |StopTransactionOnEVSideDisconnect<br />
|1<br />
| -<br />
|-<br />
| colspan="2" |StopTransactionOnInvalidId<br />
|0<br />
|0, 1<br />
|-<br />
| colspan="2" |StopTxnAlignedData<br />
|""<br />
|""<br />
|-<br />
| colspan="2" |StopTxnSampledData<br />
|""<br />
|Energy.Active.Import.Register,Current.Import,Current.Offered,<br />
Temperature,Voltage,Power.Active.Import<br />
|-<br />
|TransactionMessageAttempts<br />
| colspan="2" |3<br />
|1-100<br />
|-<br />
|TransactionMessageRetryInterval<br />
| colspan="2" |20<br />
|5-60<br />
|-<br />
|UnlockConnectorOnEVSideDisconnect<br />
| colspan="2" |1<br />
|0, 1<br />
|-<br />
|WebSocketPingInterval<br />
| colspan="2" |10<br />
|1-1200<br />
|-<br />
! colspan="4" |Local Auth List Management<br />
|-<br />
|LocalAuthListEnabled<br />
| colspan="2" |1<br />
|0, 1<br />
|-<br />
|LocalAuthListMaxLength<br />
| colspan="2" |50<br />
| -<br />
|-<br />
|SendLocalListMaxLength<br />
| colspan="2" |10<br />
| -<br />
|-<br />
! colspan="4" |Smart Charging<br />
|-<br />
|ChargeProfileMaxStackLevel<br />
| colspan="2" |5<br />
| -<br />
|-<br />
|ChargingScheduleAllowedChargingRateUnit<br />
| colspan="2" |"Current"<br />
| -<br />
|-<br />
|ChargingScheduleMaxPeriods<br />
| colspan="2" |5<br />
| -<br />
|-<br />
|MaxChargingProfilesInstalled<br />
| colspan="2" |9<br />
| -<br />
|-<br />
! colspan="4" |Firmware Management<br />
|-<br />
|SupportedFileTransferProtocols<br />
| colspan="2" |"HTTP,HTTPS,FTP"<br />
| -<br />
|-<br />
! colspan="4" |Improved Security<br />
|-<br />
|SecurityProfile<br />
| colspan="2" |0<br />
|0-3<br />
|-<br />
|CpoName<br />
| colspan="2" |""<br />
|0-128 symbols<br />
|-<br />
|AdditionalRootCertificateCheck<br />
| colspan="2" |0<br />
|0<br />
|-<br />
|CertificateStoreMaxLength<br />
| colspan="2" |1<br />
|1<br />
|-<br />
|AuthorizationKey<br />
| colspan="2" |""<br />
|32-40 symbols<br />
|}<br />
''If you have more questions about OCPP please visit our FAQ section: https://wiki.teltonika-energy.com/view/FAQ''</div>
KarolisS